Can someone point me to the thread on the plans for the reverse-engineered Jubilee plans?  Numerous attempts to search have proven fruitless.

Thanks!!

Alot of questions were answered here....
http://forums.klipsch.com/forums/636033/ShowPost.aspx
and here
http://forums.klipsch.com/forums/633721/ShowPost.aspx
and here
http://forums.klipsch.com/forums/555784/ShowPost.aspx
Hope that helps...

Thanks, seti, those are great, but there's a thread out there somewhere with a set of dimensional plans and a picture someone did of a horn layout on plywood to test for angles.  I found it the other night and I'll be darned if I can find it again.

I have only collected items posted from this site but I'll post what I think you're looking for. If you want the folder of everything I've snarfed off the site regarding the Jubilee just let me know and
I'll zip it and email it to you.

does anyone remember who drew these up?

.

they did an excellent job i won't post the rest but hope that helps

BigDnFay did the test-build pics and finished Jubilees pics that you are talking about. The thread(s) is in the Updates and Mods section.

DM

Those are the drawings, seti.  There was a long thread that followed . . .
It would be great to have your zip file!!  Thanks!!

seti, please count me in for the zip file as well, I have bene trying to contact bigdnfay about this but without luck.  thanks!  tony

Here is a pic of my unfinished Jubilees. Sorry, still haven't had to sit down and put my notes into a coherent package.

Big D

How does the low bass of the Jubilee compare to the K-Horn?  As best I can tell, the K-Horn bass horn is longer.  Doesn't this translate (all other things being equal) into deeper? 

I seem to remember one of Paul's goals for the Jubilee would be that it would go deeper than the K.  If that's correct, how is that accomplished?

How does the Cinema 535 Jubilee bass version compare to the test mule with two twelves and a passive?

Big D, those are gorgeous!!  What did you use for woofer drivers?  crossovers? etc.?

Hello,
   I am "neandertal" and the drawings for the Jubilee are mine.  I was working on reverse engineering the best match to Paul's dream of the "best" possible Klipsch speaker.  I used the input from all members who had any exposure to the Jubilee prototypes or any possible suggestions.  I (we) produced the design drawings from a composite of ideas.  The well dried up and no further suggestions resulted in the project dying before we completed the whole package.  The base bin was fairly well resolved but we never did come up with a hardware list or any cross-over ideas.
  I will have a set built by the end of the year to prove-up all the assumptions made in the design process.  I will be glad to continue work on a final set of drawings if we find a renewed interest.

Bert

Also,
I need to add I do not know who did the PDF drawings.  I work in AutoCad and the drawings I posted were as  jpgs.  The first ones inserted in this thread are the ones I drew.  I also would appreciate a zip of all the data that has been collected for the Jubilee in case I have missed something.
Bert