Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 01/28/14 in all areas

  1. Legendary folk singer Pete Seeger dies at 94
    1 point
  2. Fine furniture oil is what the Instruction Manual calls for; have used Lemon Oil on mine for over 20 years; good for maintenance, but not for cleaning/restoration.
    1 point
  3. The wood question is a good subject, glad you brought it up Duder. Plywood gets used in my shop. When Mr. Detel said " "Also when looking for sheets without dings from handling I was told by a store employee we don't like when people look through a stack and pick out sheets. I asked, well the sheets with a bad corner must be cheaper because i will not pay 50 a sheet for bad edges, go ask your manager what he thinks, I think he got the idea as he walked away and no one came back." I was once again reminded of how much so many of us are so similar. Thanks for the grin's Detel Yea this is a great place to hang out.
    1 point
  4. How about a spud build thread.
    1 point
  5. Build them with a better wood, you won't be sorry, also OSB is not very smooth depending on what kind of finish your thinking of. I like the spud, I only have one and would like to build another for the other corner, it's amazing what it can do with small drivers, it's a cheap build for a good sub. There is also the bigger brother of the Spud using bigger drivers if that fit your space better ?
    1 point
  6. My 1 year old Panasonic Plasma doubles as a Space Heater; nice now, not so nice in summer.
    1 point
  7. Make sure the cans are secure so there will be no rattles before installation. You can use good caulk and/or soundproofing self adhesive sheet if you run into this problem.
    1 point
  8. OSB is hard and pretty tough, but not on the edges, if you hit the edge with a hammer it starts to flake and crushed easily from the edge you would not want to build any kind of cabinet with it it's designed as a cheaper replacement for CDX(cheap) plywood. For one thing there usually is some strands that become unglued on the outside and could vibrate. True it has no voids but that's it's only attribute, do not trust anyone who builds anything serious with OSB , If they can't do better than that they just don't care, really cheap or really misinformed.
    1 point
  9. I've already busted sheet rock in that room for audio once. That was plenty.
    1 point
  10. I don't use my two channel system nearly as much as I do the solid state system. Today I was listening to it and after about 20 minutes the music started to really draw me into it. It may have something to do with the tubes warming up or the 2 channel system is a 4 way system compared to the SS which is a 2 way system using subs. Don't get me wrong I like the SS system and the bass form the big subwoofers. I guess I need to do some more listening to try an put my finger on the difference. The one thing that is apparent is the bass from the two systems. Not more, since the Mc speakers have 12 in. woofer and 8 in. mid bass driver, but the Mc speakers are heavily damped and have an orchestral hall quality. The RF 7 system has a more defined bass quality.
    1 point
  11. Me too. When the RF-83/RC-64 first came out I thought they looked awesome but when I went to audition felt they were considerably warmer in the upper end which didn't sound as clean/crisp as my RF-7s/RC-7 (to my ears) up front. I also auditioned a couple of Klipsch THX Ultra II setups that sounded closer to my HT, but didn't think it was an "upgrade." All-n-all my guess is that all of these upper end speakers will sound nice and the difference is at the margins.
    1 point
  12. I forgot to welcome you to the forum Brend--Welcome! I will also add that setup matters including/especially if used for multichannel and which center was auditioned with which speakers. Given this also the internet and so many people get their opinions from reading and not experiencing on their own I felt the need to pursue where you were coming from...Heck, if enough people come on here and say that the RF-7IIs are 'way better' than the originals I may have to go audition. Fwiw, any audition in stores should be suspect regardless which speakers you are auditioning. Either they could try to sway you into what they want you to buy or they don't have the time or inclination to level-match what your are considering is usually the case. Anyway, good luck and enjoy your New speakers!
    1 point
  13. Amps can make a big difference in the way your K-horns sound, but you seem to have a nice amp. If you are looking to enhance the sound you are getting there are other directions to go in. Depending on the age of your speakers they might benefit from having the crossovers refreshed, or there are several people making new crossovers as well. Another way to really improve the K-horn is upgrading the mid horn. IMO those will make as big or bigger difference in the sound as playing around with good high end amps.
    1 point
  14. yeah... i think "Huge difference" between the 7's and the 7ii's is a bit of a misnomer.
    1 point
  15. From the album: derrickdj1 HT

    Basic system but, the Yamaha M 80 has been replace with an Acurus 200 Five amp.
    1 point
  16. Thought it would be interesting to post not that it is really relevant or anything but One of the only really close family members I have outside my immediate family is my cousin Andrew Leone. Why is this something id post on our beloved forum? Because he is a top team fighter, and his brother as well and who are they sponsored by? Our even more beloved Klipsch. I’ll post a link to a video of him advertising with our cherished company this weekend.
    1 point
  17. Thanks guys. Just edited the title to indicate "sold". I will miss these wonderful Cornwalls, but they went to a great home. I will hopefully have another pair someday.
    1 point
  18. just go back and edit your first post and mark them sold
    1 point
  19. Just wanted to mention these were indeed sold to a very nice gentleman. Thanks Jino! Enjoy Can anyone direct me how to edit the thread title to mark the speakers as sold?
    1 point
  20. referencing the above post.....http://www.hometheatershack.com/forums/creative-sound-solutions/65257-new-trio12-apr15.html
    1 point
  21. I read up that that amp's design. That guy really knows what he's doing technically and represents "new school" of thought. Not that there's anything wrong with the old school. Looks like you have the best of both worlds. Your amps highly efficient and the output transfer function with loudspeaker compensation where it counts, and the less efficient part used where greater efficiency and low frequencies are not needed.
    1 point
  22. Boxx I have white carpet in the basement and I have kids, lol. Now that they are in college I finaly have it stain free he he.
    1 point
  23. Never had a Liga Privada. I'll try one. SSH
    1 point
  24. NIce Schu. I have kinda changed to the CAO Brazilia as one of my Favorites
    1 point
  25. Stacking work great. I have two SS 18.1's stacked.
    1 point
  26. We are getting ready to launch an complete new line of R.... oh, crap, I'm probably not supposed to say anything yet. Rest your fears. This is the year of copper. We're not going anywhere. Either is the Heritage line.
    1 point
  27. In order to develop loud speakers and sell niche items the company first and foremost has to stay in business and be profitable. Niche products like Heritage speakers won't get you there. You have to sell what the masses want to be able to cater to the minority (us).
    1 point
  28. Mine are from 85 and they have the 1 motorboards as well. I think they changed it much later in 85.
    1 point
  29. These are interesting though. Built in 85' and still have the CW1 motorbords. And I thought my 84's were a stretch.
    1 point
  30. Congrats on the sale and welcome to the forum; will you be staying now that the sale has been made?
    1 point
  31. I have a buyer coming to buy both the Corwalls and Counterpoint amp later this month.
    1 point
  32. i don't know why you are talking about this at all in his thread! Ridiculous! Take it to pm if you have an issue with his price. WTF are you talking about? I don't have an issue with his price, they are beautiful speakers and someone will love them. Reading comprehension IS your friend, and "Lighten up, Francis".................. Shakey
    1 point
  33. i don't know why you are talking about this at all in his thread! Ridiculous! Take it to pm if you have an issue with his price.
    1 point
  34. I sold my 1986 CWs in pristine condition for 800.00, and that might have been a little low. A friend just sold his with Crites updates for 1000.00. I have seen them as low as 600.00 (which is what I paid for mine). I don't think 975.00 is out of line for speakers that look this good, just a little higher than I would pay. I think he will do fine though.
    1 point
  35. Quality speakers fetch good prices, snag-free cane grills give these corns a leg up on the competition. Good luck with your sale newbie
    1 point
  36. nah.. $975 is about ball park. but it may take some time to move them.
    1 point
  37. Even though the price is a litte higher than average, they are beautiful speakers. GLWS. Shakey
    1 point
  38. Thanks for the response. I doubt they will last till Sunday evening! LOL.... Please keep me in mind should you consider shipping. Best regards, John
    1 point
  39. Not really interested in shipping at this time. I would much prefer local pickup. If they don't sell in a couple months, I may be willing to consider shipping. These are just too big and nice to ship without trying to sell locally first. Thanks for your interest John Chi-town.
    1 point
  40. Would you entertain shipping at all? What if I were to hire someone in area to professionaly prep for shipping?
    1 point
  41. I am located between Jacksonville and Gainesville in North Florida. Khorndog asked about the Counterpoint SA-100 amp. Good eye! It sounds great with the Cornwalls. It has the punch of solid state with the warmth of tubes. I actually was thinking of selling the Counterpoint as well, as I recently bought a Cary SLI-80. The Counterpoint SA-100 is near mint condition inside and out, super clean...has the original box, receipt, and paperwork from when it was purchased new. I'll take $600 for it, if anyone is interested.
    1 point
  42. 1 point
  43. god... more floridian goodness. what the heck is it about florida that breeds good selection of klipsch products on the secondary market...
    1 point
  44. I do and I'm pleased with the result....
    1 point
  45. Do it. I've never organized my cables until we built the HT and had the false wall. Funny how I decide to organize when I have everything hidden behind the cabinet. LOL I went as far as to route all my power cables one direction and my signal cables the opposite direction.
    1 point
  46. After several weeks looking into a DIY design and quite a few e-mails and calls to various folks much smarter than I, the decision is....the tapped horn based on the SPUD design. I will be making two TH subs for my room. I have the 4 drivers on the way. I picked up a Behringer ep4000 to power the duo and have 5 sheets of 18mm BB in the shop waiting for me. Today I cut a 'pattern' to make the whole process easier. The template idea came from reading another thread on a SPUD like, tapped horn build. The template will allow me to dado slots for all the internal pieces that are exactly the same. It should make the process much easier to put together. I will be posting pictures of the build as I go along.
    1 point
×
×
  • Create New...