Leaderboard

First day back to school ! New back pack loaded and ready to go ! Thanks Christy and Elden !

SOLD - ENTIRE SET Breaking up the set, the LSI's and Heresy's are now available as separate pairs. The single split has some interest, so not offering right now, but that may change soon, perhaps later this week.... I have been working on these projects for quite some time, and they are finally done. All of the speakers have been fully rehabbed, meaning cleaned and polished interiors/exteriors, updated crossovers and in a couple of cases, new drivers. All have been tested of course, and simply sound fantastic. All the work has been done, these are plug and play....These setups don't come around very often, and will last a lifetime. I am located in zip 46544. If you want this shipped, you will be completely responsible to arrange and pay for that service. I accept Paypal, USPS Money orders, bank drafts and in some cases personal checks. PLEASE PM me with any questions, or about any options you might see below. These are all pictured on movers dollies, for ease of moving around, there are no casters or anything else attached to the bottoms. 1. Pair of one piece La Scala Industrial, model LS BG. Pair is $1900 Consecutive serial numbers, 1029 and 1030. Cleaned and polished fiberglass exterior. AA Crossovers updated with ClarityCaps New Crites CT-120 tweeters New Crites A-55G midrange K-43E woofers, consecutively numbered (which I have rarely seen), with PWK silver medallions 2. Pair of Heresy Industrial Ported, model HIP Pair is $800 Consecutive serial numbers, 5066, 5067 Cleaned and polished fiberglass exterior K-42E woofers K-77M square mag tweeters K-55M midrange (option to upgrade to K-55V solder lug, dual phase plug driver) Additional cost HIE networks updated with Dayton 1% Precision audio capacitors 3. Single La Scala Industrial Split NFS right now. Cleaned and polished fiberglass exterior LF Bin serial - 1307 HF serial - 2218 K-77M square magnet tweeters K-55V push terminal midrange (option to upgrade to K-55V solder lug, dual phase plug driver), or (option to upgrade to A-55G driver) Additional cost. K-43E woofers AA crossovers updated with Dayton 1% Precision audio capacitors

Just read that Burt Reynolds died of cardiac arrest earlier today. Man, another one of my childhood "heroes" has moved on. I remember going to see Smokey & the Bandit at the theater and, like many almost 11 year old's then, thought that was the coolest car ever....the black and gold Trans Am. He may have had his share of troubles and issues through the years, but he definitely did a lot of great movies and shows. RIP, Bandit.

MX110x Playing nicely with the VRD's Now I just gotta put the wood cabinet over it.....................................

Actually, I got dusted! I just want someone to care. Thanks for asking.

Yes. And there still is. The constitution actually provides a remedy for incompetence.

What we have here is abject and complete failure of leadership.

First cup of coffee down, waiting for the golf course to answer their phone to order breakfast since I missed it this morning. Below is a link dink about what we do here https://www.cbp.gov/newsroom/local-media-release/cbp-air-crew-leads-uscg-55m-cocaine-seizure

What we have here is the one reason why the Evangelicals put a person with the reputation of Donald Trump over the top. Fwiw, I pointed that out prior to us not being able to talk about it. Of course that's small potatoes to what is about to happen to our "leadership," within the next month or two....A lot going on.

Hello, Pretty sure they have around here. Good place to ask. May have given them a twist, even. Spade lug maybe, plus.

pssst… has anyone soldered terminals on 12 gauge solid core copper romex for their speaker wire

Picked this up last week Sent from my iPhone using Tapatalk

I'll keep sending you links till you finish your speed reading course then.

You need to venture out of the CCC area from time to time. There's a great big forum out there.

Ship them! Take PayPal gift only. Buyer risks all. Place them on a pallet. R+L OR USHIP only. Nothing else. Buyer pays. Period. Don't hack them up please.

Funny you say that. I had to do that last year But is was way more then one Lol

Would be a crazy HT setup, especially in one of the loft-style condos created inside an old mill, etc. Brick walls, heart pine flooring, exposed spiral ductwork......and THESE

I have a rule with speaker sales for better or worse. I want people to pick them up in person. Each of us has a different set of ears and preferences and while there is general consensus about what sounds good some like La Scalas and some like Cornwalls best. So I expect people to show up here and if they don't like them I Paypal a refund right on the spot. I have never had to do that but the offer is there. And then when they leave I am not responsible in any way for anything like shipping damage and then the ensuing nonsense that can go with that. With all the damaged shipments I received last Christmas season I can say in retrospect this is the best choice for me. I have tried for over a year to sell these and no I don't want to destroy them but at some point in time things have to go. I have given people plenty of time to get them and no one has appeared. I have to drive all over the place to get these because I wanted to and I bought these things I had never heard before because I wanted to hear them. I figure someone who is interested can do the same thing I did. I also have a list of things I will never buy again because they are darned hard to sell no matter how nice they sound and these 262's are in that category. Never again. Same for KP 260's and KSM 2's.

That I'm just as crazy as YOU MEN ON HERE!! And I'm a minority-A WOMAN. Jeez I currently have a pair of Heresy on loan, have a full Reference 5.1 system taking up the spare room, Frazier Super Monte Carlo speakers in original boxes w/paperwork that are sitting since I bought an RC-7 to try between the Cornwalls instead of 1 of the Frazier's. Now, if my friend would buy the Reference system, then I can get an SVS pb-2000 from Cory-NOW DO YOU SEE MY POINT--HA HA

What's your point?

The new stucco finish impervious to road damage.

It's not right next to your seat is it? That's a deal breaker.

Lol, looked at the map again. Wrong state...

This morning starting off with some original metal...Budgie.

I put my plasma 42” in there already because it fits the cabinet and powers up and down for storage . Then put the 55” I had sitting here in bedroom from the OLED upgrade . Thinking speaker bar and sub on this setup Sent from my iPhone using Tapatalk

Good Morning, I was thinking about posting a Kenny Chesney song - "There goes my life" - nevertheless, I didn't want anybody to spill their coffee, the thought rolled into automobile selections for the future, I guess, maybe experiences, no wait, how to park, how to modify an interior with hang bar's, Hang in there !

Take it all to someone who has a Mig welder and have at it! hahaha 😂

Ha! Picked up a new sealed pair of HD-600 in a box of cables at an auction for $2... One happy boy... Let the morons fight over 4 OLD Sansooey speakers! hahaha!

F1 exhaust! Gotta love it.

Neither...

ha ha. Who gets credit? The President or the cabal of anonymous insubordinates running the show?

Oh come on Quack Quack....... the economy is kicking butt, jobless rate waaaay down, GDP waaaaay up, Stock Market is Stocking, Hamilton took out Vettel in the first lap at the Italian GP, who could ask for more. Cheapass Chinese tennis shoe manufacturers are pissed, all the right people are pissed off,....

people who use it as a dog whistle...

I'm gathering they ruled that out and just chose coordinated insubordination.

is it natural, or nature

yea it's a gate post. But now I have realized I have no pictures of the wall i built on the other side last summer.

Some pix uv my birthday at Niagra falls. And an instructional card given to me by my wife. BTDubs: the chemical symbol on my shirt Iz caffeine.

Worth it if the price doesn't go up. Wonder what happened to the finish?

I'd say all three.... Forte I/II and Chorus II...are really finicky due to placement..... KLF-20/30 are straight forward in your face speakers..... Another consideration KG 5.5 ( wish I never sold mine) Redoing cabinet glue/reinforcement on KLF/KG series is a must George

Seriously the HD800 are the best headphones I've ever owned. I may be committing heresy by admitting this.... but I use them for DJing.

Yeah, it's bizarre. IIRC, Kaepernick filed suit against the NFL for blackballing him to keep him out of a job. Right or wrong, he has "misfit" plastered all over him. That Nike adores him for this is not very rational, except to the extent it's just a slap in the face retort to an undesirable tariff policy. Then, maybe it makes sense.

I agree with Carl and Emile. I have owned several pair of Klipsch headphones in both over the ear and in ear and neither impressed me. I have a part time love affair with Sennheiser. The HD599 are so far my favorites and I only paid $99 on Black Friday for them. Easy enough to drive yet very high end feel to them. I do think the Klipsch Heritage cans are pretty though! Tim

Haha ... only $800 ... what a bargain I'll stick with Sennheiser

you need to get out more Emile 😀

I'm slow today, must not be enough coffee. I can't find what options A, B or C are. Was hoping by posting in the CCC thread I'd drive some more traffic to my HT form post. I don't see an ABC in either. C might be a link from @windashine on how to poke holes in walls, I'm pretty good at that.

As I'm sure you know, need to be careful with the high powered air.... I use Deoxit D5 on pots and switches, a very common and well regarded product. Not cheap but excellent quality.

.