paul cbc

Mark, Thank you as well for sharing your experience. Also, for Kudret, et al-I had an exchange w/ Eric regarding the orientation and decided on the wide side. Here's what he had to say: "Regarding the driver > mounting, if we do the driver on the wide panel, > there is a very slight 1db bump in output between > 600Hz-1200Hz (basically mid-range)." Hope this helps, Paul

DizTotus, Nice job on the speakers. I just purchased a pair of these (4.5") speakers from Eric and have a question: He offered to orientate the driver on either the narrow or wide side of the cabinet. Any thoughts as to which would be preferably sonically? My thanks, Paul

Neil, Thanks for your reply. Not sure if this is in sequence or not. No doubt, my question on Orientation messed everything up! [] Best, Paul

This is a nice tonearm. The two weights allow for a range of cartridges to be used and the VTA adjuster is a clear advantage over the stock Rega/Moth arms. Paul

I agree. FOAM is the way to go. You can buy 4x8 sheets of varying thickness and make up a nice crate for whatever you are shipping.

Jay, I've used 2 different aids with good results: 1. Dawn dish washing liquid. Good old soap and (warm) water. Remove the faceplate and soak/wipe with a clean rag. 2. For tougher stuff, not removed by #1, "Krud Kutter". Use the same way as above. Like I said this has provided me good results. ***Please try a small corner or spot on your faceplate before going "whole hog". Hate to have you wipe away lettering, etc.. Good luck! Paul

Joe, As others have noted-they look good! You can check them out in person before buying-listen to them and inpect cosmetic condition. Saving at least $100 in potential shipping costs. Nice deal. Good luck! Paul

Robert, Very nice presentation-thanks for sharing![] Congratulations on your successful build and enjoy!! Paul

Didn't know the Nitty Gritty was selling for that much! A couple less expensive alternatives: Generic Nitty Gritty: http://www.audioadvisor.com/store/productdetail.asp?sku=NGRD3&product_name=Record%20Doctor%20Model%20III%20Record%20Cleaning%20Machine Supply your own shop vac: http://www.kabusa.com/frameset.htm?/index.htm Good luck! Paul

I think if you are using a stock vacuum and fluid, the VPI is a good choice. If you are using the Disc Doctor brushes and fluid(highly recommended!), the Nitty Gritty 1.0 is all you need-you're just using the vac. Tried to search and find Allan S.'s record cleaning regimen. If someone or Allan could post it here that would be worth considering. 2 different paths. Both have yeilded good results. Keep on it. Record cleaning is HIGHLY rewarding! Paul

I have some 12AU7a tubes for sale-RCA cleartops and Sylvania(labeled Baldwin) on Audiogon: http://cls.audiogon.com/cgi-bin/cls.pl?accstube&1164064784 Tubes are matched, tested, and guarenteed by me. 10% off total to Klipsch forum members. Thanks for looking, Paul

BEEFY! Look forward to hearing the report.

Jay, If you're thinking Grado these guys have the Gold on sale for $129. http://echohifi.com/ Kurt is a super guy and will treat you well. Good luck in your search, and please post what you end up with and thoughts. Paul

Not digital tuning, but I have a Pioneer SX-535 that I'd let go for $40 + shipping. Nice shape and fits the CHEAP part.[] Paul

The Sovtek 12AX7LPS is a very quiet tube. Cheap too. Good luck! Paul

Got it Allan-thank you! Paul

Mike, I am interested in these tubes(if available) for my Fisher x-100a. PM sent. Paul

I could use a V15III sylus if oldenough passes. Paul

I am interested in the AR 3a's as well(after "meloveskhorns"). PM sent. Paul

Allan, I'd love the MX-110 manual if available. Mine came without. Paul

Chuck, I use Ikea "Expedit" shelves. They work very well for Lp's: http://tinyurl.com/gkltj Hope this helps, Paul

Wow. This is a GOOD DEAL for someone looking for Belles!! It's going to get harder and harder to find ones in such nice condition as time goes forward. Hopefully a (semi)close forum member can pick these up.[] Paul

"Hot Fun In the Summertime"-Sly and the Family Stone [] Paul

Santuxxi, Welcome to the forum-you are off to a great start! A number of folks here (including myself) will recommend vintage gear as it provides a LOT of bang for your buck. The caveat being it is older equipment, it needs to have some work done to bring it up to specs for safe and pleasureable enjoyment. In vintage, the Scott, Fisher, and Dynaco names are a good place to start. The Dynaco that member "TigerwoodKhorns" offered looks like a pretty good deal. A couple other ideas: -Contact forum member Craig Nosvlaves: http://www.nosvalves.com/ See if he has anything used for sale. Craig works on vintage equipment and builds his own line of amps. -In the solid state area the Harman Kardon 430, 730, & 930 receivers are forum faves that will mate well with your Heresies, and set you back about $100. Good luck, and let us know what you end up going with. Paul

Rich, If you like the Beach Boys, I think you'll love this set! I going to play mine today.[] Enjoy! Paul