-
Posts
8571 -
Joined
-
Last visited
-
Days Won
4
Content Type
Forums
Events
Gallery
Everything posted by USNRET
-
torque adapter Extension
-
At the school house a lot of folks thought they had to perform the calculation when using an extension between wrench and socket. Since this does not increase the 'arm' there is no difference in applied torque. Application is only needed when the arm is shortened or lengthened. For the most part the difference falls with the allowed range but we deal with some torques as low as 3 inch lbs.
-
Not that you need to be this precise on this but unless the 'adapter' is clocked 90 degrees to the torque wrench the overall effective length / torque is changed. M1 = M2 x L1 / L2 Where: M1 is the torque setting of the wrench M2 is the actual torque applied to the nut L1 is the normal length of the wrench L2 is the extended length of the wrench
-
Picked it up yesterday good as new. In total it cost me a 1/2 tank of gas; filled up then but dealer put 1/2 tank back in so I lost about $20 for the ordeal. I paid $1560 but was reimbursed about 15 minutes later. In effect I paid $20 for the dealer to detail the car. June 3rd comes the PPF and ceramic coating.
-
No word since Thursday when they planned to drop and flush the tank. Corporate gas company covering all costs directly to dealership
-
-
Fueled up with 93 octane taking 14.5 gallons of 16 max. Ran 3 miles, started missing then shut down. Cellular BMW diagnostic was too lean. Took 4 hours to get a tow that would work with car. There wasn’t a tow adapter in the car. Dealership told me that they couldn’t deliver one from 10 minutes away. They did. No way to shift from park to neutral without engine running. on line tech...check fuel cap, check oil cap, did you use at least 91 octane? Dealer will get another blast tomorrow re missing tow adapter.
-
-
No, so no tune for a while....
-
Love it or hate it it seems. I can’t see it from driver’s seat
-
603 with tune
-
-
Any interest in a McIntosh MX151? I had the C2500 and 151 and just kept the 151 as I couldn't hear the difference.
-
How does the gravity feed “gate” work? Any issue with clogs? I currently use Weber charcoal and RecTeq Rt700 pellet.
-
-
Sale of this item has been put on hold for a forum member while we investigate shipping / meet up / pony express options.
-
I used the mounting backup ring as a template to draw out the hole and enlarged it with a DeWalt cut out tool. I have one completed but now that I know how to get the existing P.O.S. out of the ceiling the next should be a cake walk.
-
The house has some existing no name ceiling speakers that have 6" cutouts. I just received some Klipsch IC-650s that require a hole size of 10". How would you enlarge the hole?
-
Anti-mosquito screens finally arrived https://l.facebook.com/l.php?u=https%3A%2F%2Ffb.watch%2F4ODJhrhOnR%2F%3Ffbclid%3DIwAR2ZXDY7v-yE_uE_jreO7g0NEkFZb8gpIRTmrWo94nMisbHx_MhUjKoRKaU&h=AT1qQ-IIleog2LD_qDiqFQLYqlaLWfhGRUqQvWpHRzADGVH2wgN7h49b2H548hxS19HUraaYQV_0J9gOZtsrn0oETY5rdiHoC2Sxyd6DQaF8ADw4aTY6PfsxJ0-Nk82yv7Lp&__tn__=-UK-R&c[0]=AT1w8mYchZjW_Bl9B53uhxwsBbnd2hJacAzzJuPvTkILDgmA742GRh_X5B2MsINf6Ri6s53fdFmahUZeXy3YsFNwEx-CY3tuMqnoACaMClUT8kil6Jnc7rdYiPG0Iupk5gWUbjwCmQ9QC-mZxEJR-obL4Q
-
No, that was incorporated into the Mc / Klipsch HT.
-
Asking price $3000.00 plus shipping When I bought the new house I envisioned separate 2 channel and HT rooms with the Parasound and Jubs in a room by themselves; that didn't work out. I put the preamp, amps and Jubs on furniture dollies and wheeled them thru the three available rooms, connected, powered up and listened for about 5 minutes each. Turns out that I selected the family room and combined the 2 channel and HT. It is what it is. The Parasound preamp and amps have about 15 minutes on them from a 5 minute test in each room. This is a condemnation of rooms not equipment. I can't justify using the Parasound to power outdoor speakers for the pool if I can get some $ back on a sell. Any interest?