msone

so do things look ok now?

the jumpers are in place

First I would like to thank everyone for the replies again you all have been helpful. Now I turned down my feq on my sub itself to a little above the 50 Hz im not sure what it is at as there are no other numbers other then the other side and that is 170 Hz. I have my phase button to normal other option is reverse I use a rca type jack from my receiver to the sub so its only one wire so I dont think it can be put in wrong. I also took a look to make sure things are in the right place like to and + to +. All was right, now my RF-82s have 2 sets of binding post for bi wire but I am not using it that way at first I was using the bottom 2 binding post and now have moved my speaker wires to the top 2. Not sure if this means anything but on the bottom 2 post next to the -/+ symbols it says LF and on the top 2 post it says HF. Do these mean anything? Low feq and high feq? Anyways I ran the mic test again after checking wires and switching to the top post and this is what I get. Subwoofer = yes Front = full band Center = full band Surround = 100 Hz note: these speakers are small Surround back = not used yet LPF or LFE = 80 Hz (thx) Subwoofer mode = LFE only (thx) note: this option is only available when the fronts/center is on full band if they are not then this option is grey. My fronts and center were 2 days old from my first post so they are new and I got them from a store that was given to me by the dealer finder on the main Klipsch site. My rears and sub were new when I got them also. As for changing stuff on my receiver I can do speaker impedance, speaker config or where I can set the feq, speaker distance, lvl calibration and eq setting. I have shut off everything just incase using the top 2 binding post on my fronts is not a smart thing to do. If they are ok to use please do tell me lol. So am I ok now or should things still be looked into or adjust to sound better?

yes i can here is what i can pick Full band, 40 Hz, 60 Hz, 70 Hz, 80 Hz (thx), 90 Hz, 100 Hz, 120hhz, 150 Hz, 200 hz

i do not have the option to set speaker size on my receiver.

when you say set to small do you mean on my dvd player?

Thank you for the info I have put my fronts on 80 Hz and my sub was always on 80 Hz. Any tips on what my center and surrounds should be on? Specs are 1 or 2 posts up. I did do another auto set up test with the MIC and now the center was put to 60 Hz and my surrounds were put to 150 Hz are these cool or should I change them?

here are the options on my sony sub lvl min - max cut off freq 50hz-170hz phase normal or reverse

My front Specs Specifications FREQUENCY RESPONSE: 33Hz-23kHz +/-3dB POWER HANDLING: 150W RMS / 600WPeak SENSITIVITY: 98dB @ 2.83V / 1m NOMINAL IMPEDANCE: 8 ohms compatible HIGH FREQUENCY DRIVERS: 1" (2.54cm) Titanium diaphragm compression driver mated to 90x60 square Tractrix® Horn HIGH FREQ CROSSOVER: 2000Hz LOW FREQUENCY DRIVERS: Dual 8" (20.3cm) Cerametallic cone woofers ENCLOSURE TYPE: Bass-reflex via dual rear-firing ports HEIGHT: 43.6" (110.7cm) (w/feet) WIDTH: 9.5" (24.1cm) DEPTH: 16.25" (41.3cm) WEIGHT: 66lbs (30kg) Center specs Specifications FREQUENCY RESPONSE: 57Hz-23kHz +/-3dB POWER HANDLING: 150W RMS / 600WPeak SENSITIVITY: 98dB @ 2.83V / 1m NOMINAL IMPEDANCE: 8 ohms compatible HIGH FREQUENCY DRIVERS: 1" (2.54cm) Titanium diaphragm compression driver mated to 90x60 square Tractrix® Horn HIGH FREQ CROSSOVER: 1150Hz, 1650Hz LOW FREQUENCY DRIVERS: Dual 6.5" (16.5cm) Cerametallic cone woofers ENCLOSURE TYPE: Bass-reflex via dual front-firing ports HEIGHT: 8" (20.3cm) WIDTH: 23.5" (59.7cm) DEPTH: 12.5" (31.8cm) MOUNTING: Uptilt and Downtilt feet WEIGHT: 32lbs (14.5kg) Surrounds specs FREQUENCY RESPONSE: 100Hz-20kHz±3dB POWER HANDLING: 50 w (100 w peak) SENSITIVITY: 90dB @ 1watt/1meter NOMINAL IMPEDANCE: 8 ohms CROSSOVER FREQUENCY: 4900Hz TWEETER: K-104-KV 0.75" (1.91cm) Polymer dome compression driver HIGH FREQUENCY HORN: 90°x40° Tractrix® Horn WOOFER: K-1068-KV 3.5" (8.9cm) Poly cone ENCLOSURE MATERIAL: Stone Mineral Compound ENCLOSURE TYPE: Bass reflex via rear-mounted port DIMENSIONS: 7.5" (19.05cm) x 4.25" (10.8cm) x 6.375" (16.19cm) Now as for the Sony sub I do have 2 knobs on it but im not 100% sure what they are I know one makes it louder and I have them both half way. I will check when I get home from work. As for me being able to change the setting on my receiver I can here are what I can choose. Full band, 40 Hz, 60 Hz, 70 Hz, 80 Hz (thx), 90 Hz, 100 Hz, 120hhz, 150 Hz, 200 Hz thank you for taking the time to help me.

Im not sure what you mean by small fronts or large fronts and so on. Are you asking me if I have them set to large or small? If this is so the only place I can do this is on my DVD player and I think they are all set to large. My fronts are hooked up to my front CH as I can hear music on them fine when playing a cd. I will have to check to make sure they are wired correct IE. to and + to +. However I am not sure if i have the speaker wire connected to the right post on the speaker box because I have 2 sets for bi wire. Right now they are in the bottom set of posts because I do not have them as bi wire. Is this correct? My sub is just one wire from my receiver to the sub. I take it that having a hole from 80hz to 200 hz is not good and that things are set up wrong? Again sorry for having no clue

Hi I wonder if you guys have some time to help a noob out with some questions. I hope I am posting this is the right section. I just got a pair of RF-82s and an RC-62. I am using an Onkyo 803 receiver and I used the setup Mic that comes with the receiver. I am concerned that it did not set things up right but I have no clue what right and wrong is. As of right now this is how it is set up. Sub---- yes Fronts ----- 200 Hz Center---- 100 Hz Surround ----- 100 Hz Surrback----- N/A I do not have these hooked up yet LPF of LFE --- 80 Hz Now I am not sure what all that stuff above is or means. Is it right? If not what should it be? Here are more details on what I have Receiver is Onkyo 803 Fronts are RF-82 Center is RC-62 Subwoofer is a 5 or so year old Sony 12 not sure of the model number. Surrounds are Quintet II will be upgraded soon Surround back will be Quintet II when I get the time to add them also going to be upgraded soon. Again sorry for being a noob I just want things to be set right.