Jump to content
The Klipsch Audio Community

The Dude

Heritage Members
  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by The Dude

  1. Same issue, since all of our work was on preset 3, the amp defaults to preset 3 when the right side config is loaded and then the high frequency drops off. Weird.
  2. Does the k402 have 300hz capabilities with the right driver? My BMS claim to go down to 300 hz. Is this something I should try? Sent from my SM-G986U using Tapatalk
  3. You could easily build something with these. If not SMD offers one for 4 speakers https://www.amazon.com/SMD-Channel-Speaker-Terminal-Stainless/dp/B01ATQSV5U/ref=mp_s_a_1_9?adgrpid=64569626388&dchild=1&gclid=Cj0KCQiAvP6ABhCjARIsAH37rbQ7rirSI625BArpFunRNko8a36Ax0pcdGcz5bz0QVTRYGJnpYhEEegaAoZqEALw_wcB&hvadid=274720114706&hvdev=m&hvlocphy=9024602&hvnetw=g&hvqmt=e&hvrand=5898766779438441258&hvtargid=kwd-369474163173&hydadcr=19887_9672012&keywords=smd+speaker+terminal&qid=1612742915&sr=8-9&tag=hydsma-20 Sent from my SM-G986U using Tapatalk
  4. Does not appear so Sent from my SM-G986U using Tapatalk
  5. I don't think that was it as I was getting the same readings with no output until i switched presets.
  6. So going with your advice, I decided to switch through Pre sets and noticed an increase in high frequency as measurement shows has returned. Maybe a setting with preset 3? Not sure, but does this confirm our diaphragm is working properly? @Chris A not sure if your remember how it looked with first measurement, but this is back to where the spl once was. However, I now am back to nasty phase and GD measurements. I think I will add our filters one at a time until I see if something changes this.
  7. Maybe a bad solder on the ring terminal? Sent from my SM-G986U using Tapatalk
  8. .030 with fluctuations, seems on point with the other side. Sent from my SM-G986U using Tapatalk
  9. Hypex Fushion Fa123, You saying shut it off and turn it back on? Sent from my SM-G986U using Tapatalk
  10. Showing 8 ohms Sent from my SM-G986U using Tapatalk
  11. While dialing in the peqs and delays, Chris noticed a drop in high frequency to little or no output. I could still here some high frequency, but it was down 8 db and when increase the gain on that channel I would get no additional output. So today I decided to perform some exploratory surgery and see if I can find something wrong with the diaphragm. For identification purposes, we are working on a BMS 4590. First thing I did was check the resistance which I had confirmed 8 ohms (should be fine on a 16ohm driver). Then I proceeded to remove the driver from the horn and disassemble it. Upon inspection I noticed the leads and ribbon like material have separated. Could this be my problem and if so, what could have caused on a new diaphragm? You may have to zoom in on the picture Sent from my SM-G986U using Tapatalk
  12. No TSCM bass bins, similar to khorn with wings. Sent from my SM-G986U using Tapatalk
  13. I believe you have to have 5 post, looks like you are almost there. Sent from my SM-G986U using Tapatalk
  14. I have a pair of Black Gate 33 uf capacitors that I purchased for a project that never took off. Asking $50.00 for the pair shipped via USPS, PayPal preferred, cash local pickup in Omaha, Ne. Posted elsewhere. Sent from my SM-G986U using Tapatalk
  15. I have a sliding glass door that can completely come out, no more than 6' from where it would sit.
  16. If i stack the k510 directly on top and then the Lascala bass bin on top of that, I have room in my system for one. It may actually be the one commercially made sub I would buy.
  17. I once had pics of the k69 next to Dh1a, here is a B&c next to BMS. Sent from my SM-G986U using Tapatalk
  18. I will say this, but it really doesn't matter. I would love to hear how they sound, especially with that new driver Looks-besides the 75th anniversary, I like the look, even the older style Size doesn't matter (I'd say aske my wife, but we know that's a lie), I dreamed of the day I could afford a new pair of the old style, that is all I will do for the new ones...dream. So yeah, my opinion doesn't matter squat. But I will have to agree with both sides. Klipsch is smart keeping their flagship half the price as others, but I believe a lot of dreams blew further out the window, at least mine did.
  19. Again, questioning your statement, but not confirming, I'm not saying we can't read between the lines here, but until a sales rep or Klipsch rep confirms its no longer available, then I would assume it may be.
  20. Rather it is or isn't, i do see them selling more of the KPT-CINEMA GRANDEUR in place of the Jubilee, therefor not needing the Jubilee in the cinema professional series.
  21. I remember him questioning your statement as to the original still being in production, but do not recall a hard confirm that it wasn't. If this is true, can you please cite your source?
  22. My aunt went in for pre op to some form of cancer on a Monday, they identified lung cancer that day, by Wednesday she was gone. Screech went through some major issues here in the last few years. To bad this happened. I grew up watching Saved by the Bell as one of my good friends at the time loved that show. RIP Mr. Diamond. Sent from my SM-G986U using Tapatalk
  23. I assume there will be a link posted? I happen to be working from home this week, so perfect timing.
  24. My guess is that is what the Cornwall IV and possibly the Forte IV will be, a "Cornscala Killer" Nice project by the way, I think some cherry stain would do nice.
  • Create New...