fyrpwr

4 way 4 barrel , If anyone has the others. Please post them Steve MCM4 way.pdf

Roy provided the drawing, Bob built the network

Thank You, Mr Fritz

Hi All, Does anyone have a print for the AL-3S crossover. Came out of the 87ish year LSI Thanks Steve

Pic3

Pic2

Here is the JubLSI

This JubLSI has a passive network from a Delgado/Crites design. I am using it as a center channel with Jubilees. Sounds good. Steve

I have a pic on page 18 of the 510/K69 Belle in my HT.

Hi Hogfan, The Academy would work well and not break the budget. Steve

Here is my 510/k69 Belle as a center channel

3M Super weather stripping adhesive at your local auto parts store, Black or yellow your choice. Steve

#4

#3

#2

It has been modified to a passive crossover now, It works much better than before. Outfitted with a Delgado/Crites Xover it blends with the Jubilees perfectly.

I can bring my 600s if needed or pitch in for the Joey kp600 expense Steve

Mike, I talked to this guy 3 1/2 weeks ago ! According to your post which is now deleted , You were gone for the weekend and when you saw ACE168516 posted the ad info you were surprised and could not find the CL ad .It was deleted . So what am i to think. Steve

Wow, I was going to meet Jeff Lowe in Champaign, IL on the 23rd after i got off shift for the exchange, I hope he gave you the same price $900 Here was his e-mail - J. Lowe to me show details 4:34 PM (3 hours ago) Hey Steve, sorry but a local guy offered me what I was asking and picked up these speakers. Man I found that one more of the crossovers was in need of service.. or replaced. Best of luck! Jeff Reply Forward When it comes to the green, Some people's word is not worth a @%#*

Any 6sn7gtb tubes?

Who is meagain ?

I used the stuff from parts express,1/4" seal black with sticky tape on the back. about $6 a roll of 25'

Pic 3

Pic 2

Here is my finished C2 Bob crites conversion to Cornscala, I made a plate to drop in the K77 to the K76 factory hole. Bob's horn was also inleted to drop in flush, Which Xover did he recomend for your setup? Steve