Jump to content
The Klipsch Audio Community

jason str

  • Content Count

  • Joined

  • Last visited

  • Days Won


jason str last won the day on May 9 2016

jason str had the most liked content!

Community Reputation

2176 Legendary

About jason str

  • Rank
    Forum Buzzard

Profile Information

  • Gender
  • Location
    Chicago burbs U.S.A.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have used the Eminence Kappa 15C as well with great results.
  2. Cut down a milk crate to the proper height. I know you are not looking for DIY project but its easy,cheap and works well. Felt feet on top and bottom will prevent surface marring.
  3. 16 or 18 AWG stranded hook up wire.
  4. Depends on the room, corner placement is usually best but not always. You can experiment when you get to that point.
  5. Improper placement will cause a null in frequency response, if possible fire it into a boundary for best results. Near field placement is not a great choice in my experience using horn loaded subs.
  6. As long as the horn mouth is between 18"- 2 1/2 feet from a boundary ( depending on the crossover point) to avoid a null it would work fine.
  7. Subs in a hatchback with the rear seat down works just like a horn along with the added cabin gain can work very well. A 10" driver is really not recommended in the THT though it will work, better if used in the Table Tuba design and the recommended driver is very reasonable in fact less expensive than the little 6.5" driver in the little tapped horn mentioned earlier with far greater output.
  8. The only advantage to that tapped horn is its small size. Probably fine in a smaller room at lower outputs. If you do decide to build one don't include the padding on the bends, it serves no purpose. Max output would be similar to 1 watt through the Belles but it would be struggling by that point.
  9. Just like the Communists in China would do.
  10. The front firing THTLP will work if you have 6 + foot ceiling height. Don't underestimate the Table Tuba as an option.
  11. The Tuba 18 is not worth adding as it really does not dig much lower than your mains. I suggest a 10" or better Table Tuba or THT in the corner and not the THTLP unless you plan on laying it down firing it into a corner, sloped ceilings are not the best place for the horn to exit.
  12. Bill is a member of many forums, he probably reads the forum here. Maybe somebody said something, i don't know but many forum members have done business with him that i know of and could be many more but to blame me is just wrong. You want to make an *** out of yourself that's fine but leave me out of it.
  13. At least you admit it now leave me out of your games.
  14. Sad assumption, i come here to help and learn. I recommend Bill's products because they work just as i recommend Klipsch where i can.
  15. On the lower part of the THT page it lists the Tuba low profile version hence the THTLP and there are 2 versions, end firing and front firing. All work the same, choose witch version that fits your space best.
  • Create New...