Jump to content
The Klipsch Audio Community

jason str

Regulars
  • Content Count

    4398
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by jason str

  1. jason str

    Mom

    Mom died suddenly of heart failure last Sunday morning. Bless her heart for dealing with Dad's and my refrigerator sized speakers, closets of records and C/D's for the past 50 + years and being a dam great mother. Miss her dearly. Obituary
  2. jason str

    Mom

    Thank you everyone for your prayers and well wishes, it means a lot to me.
  3. jason str

    cornwall 1 grills

    DuraCrest fabrics. <link>
  4. jason str

    DIY bass bins - dual 12" woofers

    A simple filter is cheaper than replacing a driver or four, just giving proper advice.
  5. jason str

    khorn bass bin solution??

    No corners = you need LaScala's & proper sub.
  6. jason str

    DIY bass bins - dual 12" woofers

    Best to use a 24 dB/octave high pass filter to protect the woofer.
  7. jason str

    La Scala I updates

    I have had 2 sets, the old set from late 80's and newer to me late 70's. Both had bass bin resonance, luckily spent time on the refurbish on my newer to me set and added bracing to remove any signs of the irritating noise.
  8. jason str

    DIY bass bins - dual 12" woofers

    I would do 4 corner ports personally. Corner triangular ports will strengthen the cabinet and reduce turbulence.
  9. jason str

    DIY bass bins - dual 12" woofers

    Look for the large vented cabinet. >here<
  10. jason str

    La Scala I updates

    Adding mass like veneer may change the frequency of the resonance a bit but its not going to help with the problem. Bracing will fix the issue, panel flex is proportional to the square of the unbraced span.
  11. jason str

    New dual sub setup - boomy

    Do the sub crawl, reposition and re-calibrate.
  12. jason str

    La Scala I updates

    No need to add material to the side of the cabinet. Table Tuba or THT is a great choice to solidify the bottom end.
  13. jason str

    La Scala I updates

    1/4" ply over the 3/4 will not stiffen the cabinet much at all, its just not the same as 1" material though you would think so. Bracing is really the way to make it right, might be a bit more work but worth the time and be sure to brace the inside of the cabinet ( where the woofer is) as well so you have bracing all the way from one side to the other.
  14. jason str

    New dual sub setup - boomy

    Double post.
  15. jason str

    New dual sub setup - boomy

    Google subwoofer crawl and follow the instructions, its a good basic way to position the subs. This is probably the main problem just by looking at the setup.
  16. jason str

    Passive radiator subs, not enough credit?

    Cabinet size depends on driver T/S parameters. You can't just shrink a cabinet without consequences. Most blow so much money on speakers and amps that subs are an afterthought or have only this >[]< small space left for a sub and wonder why it does not sound that great in the end.
  17. jason str

    Something New In Soldering

    Old school phone lines can get you as well.
  18. jason str

    Something New In Soldering

    Perfect for automotive use.
  19. jason str

    Passive radiator subs, not enough credit?

    Works like a port, just a tuning device.
  20. jason str

    DIY Klipsch Aristocrat Towers (corner horn)

    Looks like a Transmission line to me.
  21. The Sixes are the way to go if decent sound is the goal.
  22. 100 % Positive. As far as i know Klipsch has not used any spacers to mount the K-33 or K-43 but use a thicker gasket to keep the cone from contacting the motorboard. Maybe some think because it has less Xmax it should be OK but really this has little meaning in this instance.
  23. jason str

    La Scala wood restoration/cleaning?

    Black cabinets need black paint, there are a few ways to get them looking better. Black permanent marker- cheap but works OK. Black touch up paint- apply to scratches carefully. Give them to a local auto body shop and have them prep and paint will give the best results. Duratex is another alternative. Do it yourself prep and rattle can spray.
  24. jason str

    La Scala wood restoration/cleaning?

    Any oil based finish will darken the wood and many yellow over time, the only finish that will really leave the wood natural is wax and any good car wax will do. Nothing wrong with water based finishes, i have used water based Poly on many wood floors & cabinets with great results and longevity, this would be the second best natural looking finish using a matte finish.
  25. The Eminence Kappa 15 C is not just a drop in replacement in the La Scala, you will either need to double gasket the woofer (witch i don't recommend) or make a simple spacer out of plywood so the cone does not slap against the motorboard. Adding a good sub takes away any negatives in the replacement of the K-33.
×