Jump to content
The Klipsch Audio Community

justinsweber

Regulars
  • Content Count

    1416
  • Joined

  • Last visited

Everything posted by justinsweber

  1. justinsweber

    Triangle Port/Cornscala $4500

    bump
  2. justinsweber

    Triangle Port/Cornscala $4500

    Cornscala horn speaker - ampsandsound Hudson For sale is a new Cornscala 3 way horn speaker system. Selling off my newly built Klipsch style Cornscala's which are modeled after the famous Cornwalls and and built by staff at ampsandsoud. Exactly the same driver compliment as the ampsandsound Hudson. All parts are new. For those who don't know a Cornscala utilizes the best parts of a Klipsch Cornwall and a La Scala together.
 Cabinetry is done with Baltic birch and utilizes biscuits and additional bracing for strength, reduce distortion and resonance. 3/4" Ply with ¼" MDF for a perfectly flat, no resonant surface. Each panel is 1" thick. All braces and back panel are secured with ¼-20 fasteners. Black satin lacquer. Gorgeous on the eyes. Low frequency driver includes massive direct radiating 15" woofer for bass. This is the same woofer use in the Klipsch 904 and in the Cinema line. The woofer's weight rests on its shoulder and not its face to increase rigidity and minimize basket flex. The additional double motor board around the woofer provides isolation and the rigidity needed for truly chest thumping bass.
 Midrange horn is sourced from fastlane audio Eliptrac 400 with Fc@ 350 and being crossed @ 450hz. Midrange driver is the famous BMS 4592 Mid with Neodymium magnets, Polyester Diaphragm material and incredible 300hz crossover. The Tweeter is fastlaneaudio Contrac (Conical Tratrix Horn) paired with B&C DE-10 Mylar diaphragm crossed and 5800hz will outside of the range of the human voice. Crossovers are ALK CSW-450 which is a custom licensed crossover, combining the AP12-450 and the cornscalawal high frequency section. This is a significant improvement over a stock cornscalawal as it proved a 12db 2nd order crossover on the bass thus providing tighter and faster bass response. I know 1 pic shows the DCM50... and Eminence HF. The Drivers inside are BMS 4592 Mid and DE10. All internal wiring is silver plated teflon. This is master piece of a project and far more than the sum of its parts. Cabinet: 34"H x 24" W x 16" D
Weight: 145lbs/per cabinet Frequency Response: 34Hz - 20Khz -3db, 98db
 Sensitivity Willing to ship via road freight. Extensive experience transporting via road freight, reasonable pricing. Justin 323-88-9722
  3. justinsweber

    Triangle Port/Cornscala $4500

    Bump. Few interested parties but no-one able to make it work yet.
  4. justinsweber

    DIY bass bins - dual 12" woofers

    Mini Punch 🙂
  5. justinsweber

    Triangle Port/Cornscala $4500

    Super kind words... thank you. I will say. I started out on this forum knowing next to very little. This forum st large, Dave Harris and ALK were instrumental... That and my wife being incredibly tolerant :-). She has come to accept that speakers are made, used and sold... Its a lot of the fun in it for me. Building 3-4 pair a year you get to try some stuff and learn a thing or two.
  6. justinsweber

    Triangle Port/Cornscala $4500

    Inside pic
  7. justinsweber

    Triangle Port/Cornscala $4500

    Thanks for the kind words. I try hard to make sure they get there safely.
  8. justinsweber

    Cornscala almost done!

    Which B&C driver was used on the LF. Als networks are designed for the expected inductance of a K33 or eminence 15C. Did he make some Modifications for your woofer? You might ask if you can send him the woofer to measure and recalculate the crossover part values. If it’s a cornsclawal network as it’s a lower order filter it maybe more forgive then his higher order networks.
  9. justinsweber

    Rogue Audio Cronus Magnum Sold

    Few close but need time on the deal. I’m reasonable happy to take despot but just hasn’t clicked yet.
  10. justinsweber

    Triangle Port/Cornscala $4500

    Still for sale
  11. justinsweber

    Rogue Audio Cronus Magnum Sold

    Still for sale.
  12. justinsweber

    Rogue Audio Cronus Magnum Sold

    For sure. Understand completely. Sale pending. Should be marked sold tonight 😉.
  13. justinsweber

    Rogue Audio Cronus Magnum Sold

    Thanks man. I try to buy and sell straight up. No games. That said. The price though fair to me isnt for everyone. If I can’t get $1500 after shipping or fees. It will stay and collect dust in a corner waiting to be rediscovered:-).
  14. justinsweber

    Rogue Audio Cronus Magnum Sold

    Still for sale
  15. justinsweber

    Rogue Audio Cronus Magnum Sold

    I don't know about the Caps. Nick described an improved power supply... better resistors and caps. I signed on as he would know better than anyone. (Bought directly from Rogue). The amp can handle KT88/6550s. Im pretty sure it cant do el34s. Its a manual bias. It has 4 individual bias pots to dial it in.
  16. justinsweber

    Rogue Audio Cronus Magnum Sold

    Crazy good amp. I finally have speakers in the family room and the great compromise was SS amplification. This unit was special ordered with a not advertised PS upgrade from Nick... better Caps and resistors.
  17. justinsweber

    Triangle Port/Cornscala $4500

    Thank you. They are built like a tank.
  18. justinsweber

    Amps and Sound Hudson

    Yes I have 4 built but never assembled cabs.
  19. justinsweber

    Amps and Sound Hudson

    I try to separate what I do personally vs company. At my core, I love Klipsch products and audio in general. This way people cant say Im Hawking my stuff on Klipschs footprint.
  20. justinsweber

    Amps and Sound Hudson

    The speakers in the ad are not the same as the Hudson. Different cabinetry, driver compliment/crossover and finishing. They are amazing sound in their own right but not the same. Re speakers, ampsandsound generally only builds on spec at this point. Most customers like being able to chose exactly what they want. I however, love building speakers... as I have done for many years, I still build about 2-3 pairs a year.... listen and sell off at a reasonable price. Ive taken to changing the ports to differentiate these more clearly now... triangle ports. As an side, Ill be listing a pair of my personal speakers later... Finally need to complete a pair of my Royals... JWC Bass bins with Daves horns. Its been sitting in my garage staring at more for far too long. Time to own a pair of the big boys.
  21. justinsweber

    F/S BMS 4592-Mid pair $1150 shipped.

    Bought a pair that were never used. Installed and tested, have less than 1 hour of use. Ive compared the BMS 4592-Mid to the Radian 950Be, B&C DCM50 and yet these were hands and feet above. Price is firm. Nearly impossible to from US speaker had to wait 6mo before they came in. Justin 323-868-9722
  22. justinsweber

    F/S BMS 4592-Mid pair $1150 shipped.

    Sold
  23. justinsweber

    F/S BMS 4592-Mid pair $1150 shipped.

    Pending
  24. justinsweber

    Music Hall TT & Project arm for parts - Sold

    Id love the arm if you can measure the pivot to spindle distance.
×