Jump to content

justinsweber

Regulars
  • Posts

    1707
  • Joined

  • Last visited

Everything posted by justinsweber

  1. Its on both. I have the radian 1.4 on the multicell crossed at 500hz and the radian 1" on the multicell HF horn crossed at 4600hz
  2. Radian 745NEOPB 1.4" Aluminum Compression Driver 8 Ohm https://www.parts-express.com/Radian-745NEOPB-1.4-Compression-Driver-8-Ohm-294-701
  3. The radian 1.4” in on the large 1505 style multicell and the the radian 1” in on the HF multicell. I had to clearance the the inside of the mid bin to accept the larger radian. I was using the Dayton 250P… copy of a selenium 220 with polymide the radian has more extention without being harsh.
  4. Oh its a small room 11x11 with equipment in the closet but it does sound great
  5. Here you go. One can isn't perfect... Didn't want to bond but one could, I like the orig look.
  6. Im not sure what got into me to want to build... no regrets but has been alot of work... I like the bassbin without crossover. If I ever wanted I could try the large B&C or what not. I tried really hard to move from homebuilt to something that anyone could setup and use. Labeled and logical and what not. Westcost... what became of those JBLs... they looked insane.
  7. I can later in the week. At work now. Its same level of wiring. Im the owner of ampsandsound, if you look at the attention we give to wiring... youll see its not a concern.
  8. Unlikely... have an existing customer who wants. 8K in parts is a heavy lift. Wont be leaving for that... so much work and capital involved
  9. Its a Altec 1505 out of woof from M. Klung in Germany... about as good as it gets.
  10. Started out with a dead power transformer... new power transformers from Hybor... Turned a dead Cit2 into fantastic Monos in the same style and build of the Origonal. Orig output transformers (4,8,16) and turret boards. These are absolutely stunning and outperform the Cit 2. Im into them for $3000 and safely shipping is $300. $3300 firm. New tube set and fully balanced/bench tested. Justin 949-636-9076
  11. Marvel sorry for late reply. I didn’t long in for a bit. I think they were 4” deep and 4” in Dia. 2 per speaker.
  12. I’ll get into a write up later this week. Long story is these are mind blowing. Many here know I’ve build a lot of cool stuff. Thus far… with only one done, these are the best speakers I’ve ever owned including a set of Jub clone bins with eliptracs. Wholly different speaker but still. off to sleep. This build too the better part of 10hrs. Center section is crossover, wiring junction and and tweeter.
  13. 12lfa tuned for 40hz the eminence is a really good woofer. Can get to 1000hz pretty easily. plus makes it more similar /compatible with jib passive networks
  14. In my defense the bassbin is tratrix. Go ask JWC. Front porting was chosen to reduce room interaction. audio adhd. Maybe. I just finished a custom Zu soul supreme. Keeps me busy I think. re these speakers. I have no idea what I was thinking. They are going to be amazing. I’m sure of it. But I will be shaming them into a small room. Anyone want to build me a bonus room 😉.
  15. Here is what’s in process. crossovers are designed by ALK. Similar to the jib passive bassbin is a JWC\fast lane design. I wanted front ported. The porting is so cool. multicells are from Germany. Need to finish the bassbin, bike crosser and design a framing for the multicells.
  16. The eliptrac is an eliptical tratrix horn. ALK did the math... Dave was the CNC craftsman. In general observations: Tratrix horns image well Eliptrax horns image really well but have smaller sound stages too. CD horns have huge sound stages but dont image well. CD mid horn + Tratrix tweeter is well used idea. Tratrix mid horn + eliptial HF is fantatic. Eliptical Mid + Eliptical HF is secrete suace type stuff but prob bot huge room idea. Im venturing into multicell... wish me luck :-).
  17. I know the de85 really well that looks like one. Spot on.
  18. Ill buy them back if you can get them back down here.
  19. These crossovers have very specific applications requiring use of the k33. Don’t honk you’ll find it’s a good template. Might trying directly interfacing with Al.
×
×
  • Create New...