-
Posts
5884 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
Gallery
Everything posted by JohnA
-
Connect them to a source like a preamp or disc player. If they still buzz, return them.
-
"K" means 1972. We would have to see the label on the back or the insides to say more. "WO" means Walnut Oil and "12" means a 12-inch woofer, but almost all Heresy have that. They may well have all AlNiCo drivers. Some people think that makes them sound better. Take 'em home wipe them off with a a barely damp cloth and later rub them down with a little lemon oil and enjoy! You amp should produce between 10 and 75 watts, RMS. They won't need much.
-
The woofer is not AlNiCo, but is likely original. Unless they sound recessed, polite, or dull and all the drivers work they need no restoration. You might rub a little lemon oil on the veneer.
-
High Performqnce Stereo theater systems of Henderson, NV
JohnA replied to chronometers's topic in General Klipsch Info
Yes, Mr. Allen is a friend to Klipsch and each has helped the other. I met THE John Allen at a pilgrimage. Nice bloke, indeed. -
There will probably be a driver or software setting that will make it so. I doubt every/any digital stream running through the computer is supplied to any usb port all the time.
-
Where to hear new LaScala AL5s in Illinois?
JohnA replied to hernamf's topic in General Klipsch Info
Call Cory at Paducah Home Theater. Something of a drive from CAT country, but doable. -
Every pro audio shop can get and install one.
-
At least 40 hours of Dub-step with the bass knob at full boost; doesn't have to be loud. Just shut the door and go have dinner and a movie. Then, I'd look for "Unforgettable" by Natalie Cole and "The Book of Secrets" by Loreena McKennitt and listen for all the cool nuances.
-
If they sound dull and recessed, caps may help. Use a good film and foil cap. I have not cared for the sound of metalized caps.
-
Swap the + and - leads in ONE place.
-
The crossovers look like the ones in my 1979 models. I would not bother changing the capacitors unless they sound a little dull or recessed. That is, the sound should seem like it is coming from a little in front of the speakers. It your sound distant or reserved, use a good film and foil cap. They will not he inexpensive. Solen, in France, looks to make two different film and foil caps you should be able to purchase easily. There maybe others in Europe, too.
-
OK, good. That's plausible, but since lots (most?) Inductors are custom wound, wouldn't changing the diameter or wire gauge be a better solution? This came up while studying for my amateur General license and I just can't see giving up circuit real estate for 2 parallel inductors.
-
You misunderstand. What you linked is what I already know. That's basic circuits. What I want to know is why an engineer would parallel inductors, rather than build/buy one with the correct values.
-
I know what happens when inductors are paralleled, but why would you ever do that? Same for series? This is asked in the realm of relatively low power electronic circuits in radio transmitters/receivers, like 20 to 1000 watts. But it could apply to crossovers.
-
KLIPSCHORN RESTORATION FROM THE SIXTY YEARS
JohnA replied to FRAKKA's topic in Technical/Restorations
Salve, Frakka! I will recommend a good film and foil capacitor. Solen in France seems to make 2 lines of film and foil capacitors. You should be able to get them easily. I normally do not care for the sound of metalized film capacitors, they sound brittle, or have a metallic edge to their sound, but they are inexpensive. Film and foil capacitors have become more expensive over the last 5, or so, years, but they are worth the cost. Your dust looks just like my dust!! 😆 -
I don't hear it. Perhaps a room issue?