cronwall 70

had to go back to work out of town.I wish i was home with my cornscalas.

preglued edgebanding heat it with an irontrimed with a blad and sand litely it is thin.

I used watco stain dark walnut

thay sound good just hooked them up []

geting real close to painting motorborads and staining the cabs the sanding is almost done[]

this is my first time working edgebanding i guess the hard part begines

I am doing a "Cornzilla", (ok there are 4) at the moment and ran out of clamps yesterday. Just gluing up the first of them and I hope to put a topic together if the freeby camera arrives soon. Yesterday things were getting out of hand, I had all of the clamps I own out. There are 8 - "3 foot" bar clamps, 4 - "2 foot" bar clamps, 4 - "4 inch" C clamps, 1 - "6 inch" C clamp, 4 - "2 inch" spring clamps, 4 – "4 inch" spring clamps and a couple miscellaneous ones. Most were in use yesterday and I was wishing I had some more. Yes, during my last hard wood project I had all 16 of my bar clamps, 6 pipe clamps, and 4 quick grip clamps going at the same time. And could have used more. Here is the book shelf completed. One upper cab glued together.starting on the next cab. wish it wOOd stop raining i need some sun pic

I am doing a "Cornzilla", (ok there are 4) at the moment and ran out of clamps yesterday. Just gluing up the first of them and I hope to put a topic together if the freeby camera arrives soon. Yesterday things were getting out of hand, I had all of the clamps I own out. There are 8 - "3 foot" bar clamps, 4 - "2 foot" bar clamps, 4 - "4 inch" C clamps, 1 - "6 inch" C clamp, 4 - "2 inch" spring clamps, 4 – "4 inch" spring clamps and a couple miscellaneous ones. Most were in use yesterday and I was wishing I had some more. Yes, during my last hard wood project I had all 16 of my bar clamps, 6 pipe clamps, and 4 quick grip clamps going at the same time. And could have used more. Here is the book shelf completed. One upper cab glued together.starting on the next cab. wish it wOOd stop raining i need some sun[li]

good looking work[Y]

Yes it is nice to work with.twins

Yes it is nice to work with.

I let the glue dry for 1hr the i remove the clampsThe cure time on the glue is 24hrs

BASS BINS ARE GOING TO GETHER VARY NICE JUST WATING FOR GLUE TO DRY[]

split cab

That is a framing square you can get them at home depot. I borrowed some of the clamps from a frind.