OO1
-
Posts
73512 -
Joined
-
Days Won
98
Content Type
Forums
Events
Gallery
Posts posted by OO1
-
-
On 4/11/2024 at 10:49 AM, jspass said:
The serial #s 55S725 and 55S726. series 1
Serial nos 55S725 and 55S726 are Klipsch Heresy 1 series... Made in 1978 , with Alnico V magnets for the K77 tweeter and the K-55V midrange driver , + a Ferrite square magnet for the K-22 12 inches woofer .
-the mids K-700 horn and the tweeter horn are metal /aluminium , these speakers share the HF drivers with the larger Cornwall and the high end Belle-LaScala -Khorn series .
-the crossover is the E network , the cabinets are birch/fur plywood with Klipsch copper badges and cloth grilles ,
-
Cornwall Serial numbers 9P411 and 9P412. were Made in 1976 with Alnico V magnets for the K77 tweeter and the K-55V midrange driver + a Ferrite magnet for the K-33 woofer , the mids and tweeter horns are metal /aluminium , the crossover is the B network , the cabinets are birch/fur plywood with Walnut oiled veneer , value is 1500$ or 2000$ if in mint condition with the klipsch PWK pie badges or copper badges and grilles ,the speaker risers were optional for 1976 .
-
7 hours ago, komori said:
many years ago I spent a lot of money on a set of Klipsch speakes they are in a light oak cabinet, approx 31" tall, approx 13.5" wide and the plate says approx 4.2kg SN is 105297250 THAT is all , no model, no date, nothing. would anyone have access to SN look ups for these? wattage, model, are they part of a new model lineup? year? anything is appreciated.
thank you
The speaker model is Klipsch KG 4.2 Oak veneer , Made in 1992
-
1
-
-
1 hour ago, endover said:
Any other thoughts before I jump in on the 12SW? thx!
130$ for a new R-12SW is hard to pass up
-
On 3/21/2024 at 12:20 PM, Ajzigz said:
Here are the numbers provided:
P/N: 09000431121
QRT OAK OIL
S/N: 108944 & 10945
Made in 1990
-
2 hours ago, audiofiler said:
S/N 044-3919-1966 Chorus II.
Made in 1993
-
1 hour ago, audiophile18 said:
Ok so I used the series x cable to my tv directly and verified that it supports 4K@60hz I also did the same directly from my series x to my tv via the provided HDMI that came the 1200 and it also does support 4K@60hz
what's the model-brand of the TV you're using
-
On 3/27/2024 at 11:35 PM, DeeJayVin said:
New to channel but need help with my RSW as well. I think the copper coil things are bad and keep popping fuses. I was helping a buddy out and normally I can fix these types of things. He runs his stuff hard so something is bad and looks like the board is showing problems there. Unfortunately there’s not much out there so I’m hoping I can get the P/N’s or alternatives to fix it.
here's the RSW-15 service manual , the RSW-15 and RSW-12 are technically similar
-
13 hours ago, luca78 said:
Do these drivers have alnico magnets? What restoration work should I do on these speakers?
the Woofers , Midrange drivers + Tweeters have Alnico magnets , Made in 1969 , the speaker cabinets are in original condition including the badges- fabric -wood finish , I would leave these rare speakers as-is for preservation .
-
1
-
-
Model H Speakers H-WO -12 serial numbers 397 -398, Signed by Lloyd McClellan , PWK's 1st employee and J.D Powell , these speakers were Made sometime in 1962 .
-
1
-
-
On 3/19/2024 at 9:37 PM, lexus said:
guys thanks for this wonderful tips,i had the same issue with my 48 soundbar not powering up,bought the power module from amazon,followed the instructions to the tee from sixerfixer but unfortunately my soundbar didnt come back to life.
are you sure you wired the new PS correctly ?
-
Yamaha A-S 801 AB Class ( as low as 700$ brand new on Ebay ) , same specs / 1/2 the price of a D Class NAD C 3050
https://usa.yamaha.com/products/audio_visual/hifi_components/a-s801/specs.html
-
1
-
-
10 hours ago, JimL said:
. Here are the serial numbers 8508682 & 655781. Could that second 5 be an S in last number?
the serial numbers you provided are 2 different Heresy speakers with each Heresy speaker housing a different set of drivers and crossovers
- the 1st serial # 8508682 is a 1985 Heresy , the 2nd serial # 65S781 refers to a 1978 Heresy ,
-
2
-
-
15 hours ago, Vivi said:
Anyone know the part number for the K-100-TI-KP replacement diaphragm?
Klipsch part # 127123, ......OEM equipment CW- Forte-Heresy III / IV , cost is on par with aftermarkets
-
12 hours ago, Powerhousehb said:
The cinema 400 is not compatible with the connect app
stick with the 400 , the connect app has been a source of software issues
-
2 hours ago, bboss711 said:
Have the same issue, Cinema 600 Soundbar gave up the ghost just as described by HollyB. Hoping HollyB and/or 001 can provide the link to the parts HollyB references in the above post "I followed the link and I have purchased the exact same power supply 24 volts 4 amps 5 volts 1 amp". Appears to be two parts that I need to order and install to rectify this issue. Love this system and it sounds fantastic when it works, I just hope to have the same success as HollyB.
The link and exact items I need to purchase,
Replacing the Power Supply will in most cases resolve the issue / AC to DC Isolated Power Supply Module DC 24V 4A 5V 1A Dual Output Power AC 120V
https://www.amazon.com/NOYITO-Isolated-90-256V-50-60Hz-Industrial/dp/B07WKH5RZV?th=1
-
12 hours ago, derrickdj1 said:
Old McIntosh 275 amps don't sound the same.
yet , they're not too far apart , if properly recapped with a revised power supply .
-
1
-
-
11 hours ago, Gary Mclin said:
I have a hole in my passive radiator cap to one of my Forte ¡¡ and needs recommendations on repair kit or if someone in the Dayton,OH area that can fix it?
dust caps and black speaker cement glue are sold on Ebay in various sizes , most new dust caps have a lip , buy a pair since the new dust cap may not match the old dust cap on your 2nd speaker , use a hair dryer to melt off the glue and peel off the old dust cap if you're not comfortable using a precision knife , and gently does it .
-
scam Alert
-
1
-
-
M-5000 features low distortion up to 100 kHz,, stable at 2 Ohms @ 400 wpc ,C-5000 preamp runs on 2 discrete book matched circuit boards with 2 transformers , the AL-5 will do just fine
-
good to know
-
3 hours ago, Alrashid2 said:
Would I be stupid to buy the Cinema 600?
the 600 was discounted at very low prices , and it shows as sold out
-
city location ?
-
10 hours ago, Spiral said:
Any ideas why?
try doing a Factory Reset vs updating the Firmware
https://support.klipsch.com/hc/en-us/articles/360051253192-Cinema-1200-Factory-Reset
Chorus II's in Houston $800 (black)
in Garage Sale
Posted
1 hour of elbow grease , black satin paint + 2 new dust caps is all they need , GLWTS