OO1
-
Posts
66239 -
Joined
-
Days Won
94
Content Type
Forums
Events
Gallery
Posts posted by OO1
-
-
3 hours ago, diamonddelts said:
upgrading my Jubilee 535 speakers.
klipsch sell the K-693 , via klipsch parts
-
44 minutes ago, Cadmobile500 said:
Got em'
congrats
-
1
-
-
45 minutes ago, Hifi72 said:
I have the 1200 now (connected to nothing)
the RF-7 in any series " used " would pair well with the A-S 1200
-
2
-
-
9 minutes ago, diamonddelts said:
Sorry for late response. They sold in September
Great news
-
cool letter ,
-
@Giarc60 can you take an Ohmmeter , and check the Ohms readings of both woofers , Tx
-
10 minutes ago, Giarc60 said:
Now the 1975 speaker.
The tweeter of the 1975 Heresy was replaced with a square magnet k-77 ( ferrite )-, the Letter R stamp indicates a " Replacement " driver from klipsch .
-
1
-
-
12 hours ago, Travis In Austin said:
@OO1 I'm sure you saw this, he has one from '75 and one from '82. Same drivers in both, just the woofer might be different?
the Driver combination for the 82 is different , the woofer is the 8 Ohms ferrite K-22 -E Tweeter is the EV T-35 ferrite square magnet ,
However , the Midrange driver can vary in 1982 . the pictures of the OP shows the K-52H Heppner
-
The D Network is original , although it's extremely rare with these round capacitors , you can see this by the metal holders of the capacitors and no other holes in the wooden board to indicate that these were an Add-on
the Driver combination is the Alnico round magnet K-77/EV T-35 tweeter , the K-55M Alnico Midrange driver -the Badge is the PWK Pie badge .
the woofers can be - 2 types A)- the orange surround K-22 woofer /EV SP-12B or B- the Alnico K-22
-
2
-
-
2 hours ago, dirtfarmer3 said:
Do I need to register my new speakers for the warranty? Thanks
read all about it
-
1 hour ago, Crash55 said:
Can anyone give me any idea on how to troubleshoot the speaker?
you'll need an Ohmmeter , set the dial on Ohms place the prongs on the neg-pos terminals , what is the result ?
BTW you can purchase a used satellite speaker on Ebay .
-
prices vary depending on condition 1400$ to 1800$
https://www.usaudiomart.com/details/649815313-klipsch-chorus-ii/
-
3 hours ago, oidua said:
some ideas for an amplifier for my speakers Klipsch KG4.
For the budget, looking to $250-499 for now.
Yamaha A-S 501, around 500$ ,
-
26 minutes ago, Travis In Austin said:
Please, quit while you are ten feet under. Was stainless used by the factory? Has anyone measured the stainless?
Stainless is ferrous by the way, meaning it’s made with iron, but is has chromium to significantly reduce corrosion, and nickel, which in sufficient amounts will render the material “non-magnetic” I.e. it won’t be attracted to a typical magnet.
Lol , Stainless steel can be magnetic or non-magnetic depending if the steel at it's core is ferro-magnetic or not .
-
It is VIP to note that the non- magnetic screws or the ferrous screws used in the AA were not identical across the board , the bump in inductance varied typically whether the screw was brass , ferrous , or stainless steel .
-
1
-
-
asking price ? tx
-
beautiful , GLWYS
-
.
this screw question was repeated ad nauseam over the years Mike Colter , who worked for klipsch Technical support tested both the magnetic and non-magnetic screws in the klipsch anechoic chamber .
colterphoto1
-
- Heritage Members
- Location: Indianapolis, IN Home of KLIPSCH
I've tested the brass/steel screw theory in Klipsch's anechoic chamber. Acoustically (measureably) it doesn't make a gnat's butt difference what the screw is made of. Electrically, in theory, it might have some effect, but it's immeasurable on a frequency response curve, so it must not affect the values within the crossover network to any great degree.
-
2
-
-
the Engineers + the Staff knew about it since 1 designated screw in the AA's assembly jig was a brass screw ., but they ran out . all klipsch crossovers were tested at the Hope Plant , no exceptions , with the ferrous screw or the AA would not have shipped out .
-
1
-
-
On 1/19/2023 at 7:28 PM, BIGAL007 said:
Hey Takapunaman, I am selling a pair of the latest Klipschorns AK6 in Walnut if you are interested.
I am based in Palmy.
They are a couple of years old. I'm after 20k if you are interested.
Cheers
Alex
you can place a For sale ad in the Garage Sale section of the Forum for the AK-6
-
speakers look in great condition
-
6 hours ago, McBlueMeter said:
Looking at doing 3 Heresy IV’s across the front of my HT.
Any Heresy works great for vocals , but dont expect thundering bass , but clear bass
-
3
-
-
-
go for it
Heresy 1 Crossover Question
in Ask the Historian
Posted
yeah