OO1
-
Posts
66279 -
Joined
-
Days Won
94
Content Type
Forums
Events
Gallery
Posts posted by OO1
-
-
-
3 hours , now that's a record on the Forum
-
looks legit.
-
@JBell Cornwall 1 Walnut , Made in HOPE ARKANSAS 1980 ,
woofer is K-33-E Eminence 15 inches , square magnet , K-55V ATLAS Alnico midrange driver , K-77 EV-T35 tweeter , B network/crossover
-
3 hours ago, pzannucci said:
a number of Heresy 1's don't have k-77 and k-55v for the driver complement.
just to be clear -100% of H models + the Heresy 1 , from 1957 to late 1984 share the K-77 , the Heresy 1 has several midrange driver options as of 1982 through 84
-
@Klipschguy the manufacturer of this fabric is :
https://www.wendellfabrics.com/
email jlewson@wendellfabrics.com (864) 839-6341
-
1
-
-
9 hours ago, Georgeandbootsie said:
Hi! I recently inherited a pair of vintage Heresy II’s and have no earthly idea what I’m dealing with here. Would anyone mind loaning your expertise? I don’t even know where to start. Thanks in advance! 🙏
can you Please post a picture of the 2nd speaker's serial no tag , the Letter P in the Red Stamp on the speaker tag hides a digit and so , we cannot confirm the exact year of manufacturing ,
can you also take a closer look .......right at the center of the tag , what are all the digits following the no 9 underneath the Capital P in the word SAMPLE
-
-
56 minutes ago, the real Duke Spinner said:
Some crazy riding
How many Busses was the Record ?)
Grand Canyon jump was a full 228 feet , you gotta have real guts , the Jump bike was a Honda CR 500
-
1
-
-
2 hours ago, jjptkd said:
Could probably sell the drivers rather easy if not needed, help bring the total cost down and help out a forum member at the same time.
definitely , the Axi 2050 is back-ordered everywhere , lots of people would jump on the deal , same with the K-691
-
1
-
-
remove the woofer screws , set the Ohmmeter dial on Ohms and take a reading of all 3 drivers + ,check the internal wiring and connectors
-
1 hour ago, Erivera1990 said:
Genius! I'm going to do the same! Thank you!
staple a folded lanyard or use eyelet hole punch pliers to add a metal grommet eyelet to secure the lanyard when you pull
-
1
-
-
@rayrcanalesI would suggest that you indicate the closest city to your Location , South Texas is kinda big
-
1
-
-
The midrange driver in the 1,5 was a cost cutting measure as the K-55V was more expensive to manufacture and only available in limited numbers as Alnico V prices were through the roof .... the Heresy 1 was an exception , it used the same midrange and tweeter as the Khorn , Belle , Lascala ,Cornwall
-
1
-
-
On 1/10/2023 at 12:24 PM, Llem said:
Yes the setting and distance are very nice that's why i insist for the optimum at this placement (long wall) and dont want to go back at the short wall set up where i sit further away.
Discussions about speaker placement are only ........discussions , in the end , you're the only one who can really hear and tell , where ? is the ideal placement for the speakers in the room , someone can tell you.....do this or that.....or you can read endless reviews but unless the contributors are in the same room with you , nothing can be verified , trust your ears , dont hesitate to make changes till you find the optimal sound ,
-
3
-
-
3 hours ago, pzannucci said:
Good luck finding that configuration anymore. Most have the newer (non-k55v) mid. To me the Forte or HII is more balanced.
There are plenty of Heresy 1 for sale on Ebay , CL, , USAAUDIOMART , FB Marketplace ,
-
@SeanHiFi questions ?
1)- swap the cable around from the speaker that has no issues with the speaker that has a problem .
do not change the connections to the amplifier
what are the results ? does the same issue remain with the same speaker ?
2)- what is the DCR ? of the.... woofer - midrange and tweeter for the failing speaker , you can compare the results with the 2 nd speaker ,
- if 1 of the DCR results is much lower , then the corresponding driver has an issue ,
-if the 6 DCR results are close to identical , the issue is a problem with wiring , a loose connector or a damaged connector , or the crossover .
-
13 minutes ago, GeezerSH said:
I have the exact same speakers - walnut with risers. The passive radiators have the cones pushed in (young kids years ago). Any way to reverse this or should I look for replacements?
you can replace the dust caps or use a vacuum , just tone down the suction and easy does it , they will pull out
-
the Cornwall is way better than a Forte , big sound , lifetime durability , on the positive side , the difference in price can be very little when deals do pop up
-
1
-
-
...........
-
no
-
1
-
-
4 minutes ago, CWOReilly said:
But what about the horns?
Aluminium alloy
-
24 minutes ago, JohnJ said:
Rest In Peace Randy Bachman
Randy Bachman is still alive , it's His Brother Robbie that passed away🏥
-
1
-
-
It's not an Aluminium-Magnesium alloy , the corners of the klipsch metal trim are made from zink pot metal , they cannot be polished like extruded aluminium , and they wont anodize either , the only way to refresh these is by Electroless nickel-phosphorous plating and it 's very expensive .
-
1
-
Klipsch Cornwall Series / Year(?)
in General Klipsch Info
Posted
my guess is these speakers were part of a batch of 43 orders ,