Perocat

Hi everyone, Thank you for the replies !!! I live in a small town in Switzerland, whitout professional or big HiFi reseller. I would like to have some precise models to hear, so I can go abroad (Italy is not so far) and listen to those models. I need a 2CH stereo amp, with a direct final amp. input, in order to use the Marantz SR7005 as preamp and then the stereo amp as final for multichannel content (film). So, as RF7X3M wrote, is better to have a powerful amp. Can you give some other advice? Thank you! EDIT: @willand: so you suggest me the Acurus A-200 in the set you linked me? I saw that it has only one input, so cannot connect the DAC from the PC and the preamp output from the SR7005

Klipsch forum and no reply?

Hi all, I bought 2 weeks ago, a pair of Klipsch RF7 mk II and the center channel RC-64 mk II. As sub I have an RW-12d and rear RF-82. I use a Marantz SR7005 as amplifier. My use is 90% music, wich is 90% 2ch and 10% 6ch.... The Marantz is a musical AV Receiver, but is not an amp for music! Now, I'm searching the best solution (for about 1000-1500$) to amplify propertly those 2 RF7-II for music. I read that those amp are particulary good for RF7: - NVA AP10 - Densen DM10 - Mastersound 220 se (USED) Other amp like the Marantz KI Pearl Lite, or some NADs?...... My RF7-II dealer gave me the following proposal: - ANTI-MODE DUAL-CORE 2.0 as EQ - Two mono AdvanceAcoustic MAA706 As source I use a PC with foobar2000 and WASAPI. I don't have a good sound card, so I need a good DAC or a digital stereo amp? Thank you all for any advice

upupup

Is there a solution to reset the system?

Thank you for the answer! I already tried what you suggested me. The sub play the sound also when only the electric power is connected, whitout other cable, and in different electrical outlet!!

I forgot to say, that the sound is alway present, even if the HK AVR142 is powered on, and the sound cable is connected!! The rest of my HT is composed by: 2 RF82 (front) and 2 RB81 (back). I hear my music from computer, with an Harmann Kardon AVR142.

Hi all, I bought two month ago a Klipsch SW RW-12d. The sub has 3 EQ options, flat depht and punch. When I turn on the Sub, an high pitch sound (B, about 1700-1800Hz) sounds on the Sub. But this only when the EQ is on the flat mode. On depht and punch mode the sound magically disapears!! Any idea? Thank you! Perocat