bribassguy

Just seeing this... I am also in York and can help re-home these.

I am just north of you in PA outside York.

Looking for the last piece of the puzzle. I need 3 horn brackets… just the big ugly metal bracket from all you guys building pretty speakers.

I have already built some stands for them... I am looking to get the real adjustable brackets. BCM

I am about 13' from speaker in the MLP. I would like a little downward angle and a little toe.

Anyone know a source for these? I am looking to buy and /or make 3 horn brackets to sit on top of some KPT LF cabinets. I have seen some boxes built but I would like to angle these slightly. These would go behind a screen so it's not a beauty contest.

Would you sell me just one?

There is very little (A) curl in that picture compared to the OP picture (AAA)

I bid but was out bid on these... totally forgot to check during the memorial day bbq on my bid.

This is such an easy thing to google... http://www.alkeng.com/ap12_xo.html The AP12-xx series networks are designed to operate with the Klipsch K33 woofer which represents an impedance of 6 Ohms in series with 1 mHy voice coil inductance. AP12-500 This one is intended for the Belle Klipsch or the La Scala. The crossover is at 500 Hz. AP12-600 This one is intended for the Belle Klipsch or the La Scala using squawker drivers or horns that will not safely go down to 500 Hz.

What if I swap the mid horn with a K510?

So I am running DaveA excellent tweeters in my Cornwalls. would these be a good match?

Can you run DaveA tweeters with these? I would think so b/c the driver is the same DE drivers

Would you sell me 1? I am looking to rebuild a center

What driver / woofer? Did you use the Dayton or SI?

I think there are better options for today's Atmos encoders. I would love some THX's but the dipoles are no longer recommended for Atmos.

What are you willing to pay for a pair of AE ?

I had one of these to do an active setup... it was awesome

Are these sideways touching the ceiling?

Thanks. I almost bought these but was turn off by the seller not really disclosing the fact the HF sections are made with mystery / aftermarket components. I already have a set of real Klipsch horns and was hoping to add to the collection.

I have had HF20AT mounted on K510 for about a year with out any additional brackets after finding out that the Crites brackets don’t line up.

Are they open backed? Did you use a horn bracket? Did you use terminals or are they wired directly?

Can I see the back of your HF boxes? Is it open? Are there terminals / jumper leads or do you wire directly?

WHY would you change the width? Just aesthetics or is there a sonic reason?