Jump to content
The Klipsch Audio Community


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by NBPK402

  1. Has anyone used a Minidsp 2x4HD crossover on these? Sent from my SM-T830 using Tapatalk
  2. https://www.amazon.com/Klipsch-P-312W-Palladium-312-W-110V-MRT-Subwoofer-Merlot/dp/B00MA5204M/ref=cm_cr_arp_d_bdcrb_top?ie=UTF8 Only 2 left. I wish I could afford this now. Sure would be nice to build a DIY pair if I could find the plans. Reminds me of the Triax sub I used to have. Sent from my SM-T830 using Tapatalk
  3. This is a video from Audioholics Sent from my SM-T830 using Tapatalk
  4. Here is one speaker with the grill that I made. You can see the magnets with the flash...the 2nd one I made I painted the magnets black...even though the magnets are not visible like they are in the picture. Sent from my SM-T830 using Tapatalk
  5. I am interested in seeing someone compare the 2 versions.
  6. https://youtu.be/6RiuwqzjqlQ Has anyone ever tried this? Comments? Sent from my SM-T830 using Tapatalk
  7. The one that blew is an older model. Sent from my SM-G985F using Tapatalk
  8. I found out what blew on the amp...pics of old amp you can see what blew, and pic of new amp shows how it should look. It looks like 4 pieces are blown. Now I need to find out what the parts are, and where to get them...so I will have a spare amp. Amp is curently working fine with the new amp. Sent from my SM-T830 using Tapatalk
  9. I could see theaters staying in business if they can make enough going this route. Nice and safe for your family and friends to have a movie night at the local theater. Sent from my SM-T830 using Tapatalk
  10. When I had Dirac I saved room tunes for mlp, 2nd row map, 1st row and another for both first and 2nd rows. Sent from my SM-G985F using Tapatalk
  11. I have now saved it as a preset and to my HDD. Sent from my SM-G985F using Tapatalk
  12. I have to assume the ground from the amp fed back down the XLR, and caused the problem on input 1... I have not tried input 1 since I got it working properly again. I think the mess up on the other channels was purely my fault when I was trying to copy the settings, and not knowing how to link via the software. Doing the 2nd factory reset and then manually inputting everything seemed to be the correct way for me. I was able to input almost everything as it was. I was not able to change the limiter to 2x for some reason...so it is at 6x now. The other thing is I could not change the crossover filter name so it still says none, but the settings are the same now as they were before. Interesting thing is the cabinets have a brighter top end than the cabinetless version does now...it is not overly bright, but def brighter than the cabinetless version.
  13. I setup all the settings the way they were messed up and it sounds good again. Now I have to see when Chris responds so we can decide if we should tune now or wait until the 3rd cabinet is done...which will not have the same area inside as it will not have curved sides. I highly recommend building these MEHs.
  14. I did the factory reset, and set the mixer up again, and it appears all 3 channels are working as they should. Now I just need to re input all the settings again.
  15. This was the reponse... The other difference I saw was that Output 4 has - Polarity. Outputs 6 & 8 are + Polarity. If the problem still persists, please save the file to your computer (in case you wanted to pull up the file again later) and factory reset the processor. When all parameters are clear, re-route the channels (using the software Mixer) and check the input and output meters. See if there is audio passing through to your output without any processing. I have changed the polarity via the Xconsole, and will try a factory reset as instructed, and then set the mixer up again.
  16. No, but that makes perfect sense. I will see what they send back, and if it doesn't solve it I will ask them if it could be corrupt firmware. Firmware that is corrupt could even be the problem on the 1st input.
  17. Xilica Tech support got back to me with a revised file. I tried it and the left channel appears to work fine, but the center has no bass, and the right has no highs. I even swapped the input XLRs on the channels at low volume to verify it was not a cable (it wasn't and it appears to still be messed up...just not as bad as it was when I sent the file. Keeping my fingers crossed they will find the problem.
  18. Yup, it took out something input 1 or output 1and 2. The ethernet still works as do all the other inputs and outputs, AFAIK. Everything was working prior to this foobar problem, and even afterwards the other inputs and outputs worked. Xilica tech told me how to do the linking via xconsole, but I still have something wrong from when I tried to copy the outputs over to 7 and 8. Hopefully they will be able to solve the problem. Sent from my SM-T830 using Tapatalk
  19. I just got off the phone with Xilica, and they are looking at my settings to see if they can see what is wrong. They helped me link via Xconsole and it was very easy...just did not work.
  20. PM'd. Chris A Does this make sense? When I hold down the Menu button I do not see anything popup at all to allow me to select any channel linking, nor do I see any green LEDs lit. "Channel Linking While holding down the < Menu > button, more than one channel from the same input or output group can be selected to link the channels together. The green LEDs below the for the mute buttons are lit for the linked channels. Any modification of the data will be applied to all linked channels. To cancel linking, simply deselect the desired channel while holding the > buttons, or press the Exit key to deselect all channels. When a channel(s) is selected, the front panel menu will display the settings. Use the Menu buttons to navigate menus, Cursor buttons to navigate parameters, enter to save to settings and exit to close the menu."
  21. I just turned off an input and noticed that I have to turn off 2 inputs to turn off the onlychannel that is playing. Sent from my SM-T830 using Tapatalk
  22. I major screwed up on my setup the other day. I wanted to hookup the LEDs for my poweramp, and I went and hooked a 24v to 12v (advert said up to 35v to 12v). I hooked it up to the aux output on the icepower amp which is a25v unregulated output. I hooked up + to +, - to -, and ground to ground... I heard a pop, and cut the power. I disconnected the converter and powered back up, and had a garbled sound out of the amp. I swapped the amp with another and it was fine, so I bought 2 more, so I would have a spare. I then went to listen to the other channels, and found out channel 1 had a mid/high tone coming out. I tracked it down to the Xilica. I then decided to just run the left and right off of input 2 and 3, and use the corresponding outputs for them, and it worked fine. My amp shows up today, and I install it. I then try to copy the output settings for the right channel (output 5 and 6) to output 7 and 8. It shows up properly via the windows app, so i proceed to work backwards and copy the center (output 3 and 4) 5 and 6. Next I copy outputs 1 and 2 to 3 and 4. Next I move the inputs. So I copied input 3 to input 4, input 2 to input 3, and input 1 to input 2. I figured it should then work properly, but I had zero sound. Next I did a factory reset, and now I am getting left and right as left.! I am thinking I fobarred the linking... I looked in the manual and I cannot figure out how to change the linking nor how to change the name of the inputs, and disable the #1 input, and #1, and 2 outputs. Can someone please help me get this back up and running so I can get the tune completed and enjoy my setup again? Sent from my SM-T830 using Tapatalk
  23. True, and they only make 50% from theaters while they make 80% from streaming. I just wish they would keep making physical media. Sent from my SM-T830 using Tapatalk
  24. Well this is bad for the theaters, and also for buying physical media. Disney is cutting out Theaters entirely. Sent from my SM-T830 using Tapatalk
  25. I hope you are right, but I tnink when this is finally over it will not be the same as it was before, but could very well be a new normal. Sent from my SM-T830 using Tapatalk
  • Create New...