NBPK402

Yup, it took out something input 1 or output 1and 2. The ethernet still works as do all the other inputs and outputs, AFAIK. Everything was working prior to this foobar problem, and even afterwards the other inputs and outputs worked. Xilica tech told me how to do the linking via xconsole, but I still have something wrong from when I tried to copy the outputs over to 7 and 8. Hopefully they will be able to solve the problem. Sent from my SM-T830 using Tapatalk

I just got off the phone with Xilica, and they are looking at my settings to see if they can see what is wrong. They helped me link via Xconsole and it was very easy...just did not work.

PM'd. Chris A Does this make sense? When I hold down the Menu button I do not see anything popup at all to allow me to select any channel linking, nor do I see any green LEDs lit. "Channel Linking While holding down the < Menu > button, more than one channel from the same input or output group can be selected to link the channels together. The green LEDs below the for the mute buttons are lit for the linked channels. Any modification of the data will be applied to all linked channels. To cancel linking, simply deselect the desired channel while holding the > buttons, or press the Exit key to deselect all channels. When a channel(s) is selected, the front panel menu will display the settings. Use the Menu buttons to navigate menus, Cursor buttons to navigate parameters, enter to save to settings and exit to close the menu."

I just turned off an input and noticed that I have to turn off 2 inputs to turn off the onlychannel that is playing. Sent from my SM-T830 using Tapatalk

I major screwed up on my setup the other day. I wanted to hookup the LEDs for my poweramp, and I went and hooked a 24v to 12v (advert said up to 35v to 12v). I hooked it up to the aux output on the icepower amp which is a25v unregulated output. I hooked up + to +, - to -, and ground to ground... I heard a pop, and cut the power. I disconnected the converter and powered back up, and had a garbled sound out of the amp. I swapped the amp with another and it was fine, so I bought 2 more, so I would have a spare. I then went to listen to the other channels, and found out channel 1 had a mid/high tone coming out. I tracked it down to the Xilica. I then decided to just run the left and right off of input 2 and 3, and use the corresponding outputs for them, and it worked fine. My amp shows up today, and I install it. I then try to copy the output settings for the right channel (output 5 and 6) to output 7 and 8. It shows up properly via the windows app, so i proceed to work backwards and copy the center (output 3 and 4) 5 and 6. Next I copy outputs 1 and 2 to 3 and 4. Next I move the inputs. So I copied input 3 to input 4, input 2 to input 3, and input 1 to input 2. I figured it should then work properly, but I had zero sound. Next I did a factory reset, and now I am getting left and right as left.! I am thinking I fobarred the linking... I looked in the manual and I cannot figure out how to change the linking nor how to change the name of the inputs, and disable the #1 input, and #1, and 2 outputs. Can someone please help me get this back up and running so I can get the tune completed and enjoy my setup again? Sent from my SM-T830 using Tapatalk

True, and they only make 50% from theaters while they make 80% from streaming. I just wish they would keep making physical media. Sent from my SM-T830 using Tapatalk

Well this is bad for the theaters, and also for buying physical media. Disney is cutting out Theaters entirely. Sent from my SM-T830 using Tapatalk

I hope you are right, but I tnink when this is finally over it will not be the same as it was before, but could very well be a new normal. Sent from my SM-T830 using Tapatalk

As long as we continue to open back up, and not continue safe distancing and masks.... sadly, I think this will go o for a long time. Sent from my SM-T830 using Tapatalk

I think he is right. There might be a few that survive, but I think the majority will be gone for good. I hope that this means they will continue to sell Blurays and 4k discs. Sent from my SM-T830 using Tapatalk

I wonder if they owe on the upgrades they did. 20-40% of capacity does not give 2 meters distancing either. This is why we cannot have theaters in business in the USA and other countries can. Sent from my SM-T830 using Tapatalk

Thank you, I really like the veneer too. Sent from my SM-T830 using Tapatalk

That is for a MEH name plate I am having engraved out of 1/8" copper. I am going to send one to Chris A, since he designed it so well, and is sharing the info, and tuning for everyone. Sent from my SM-T830 using Tapatalk

I am getting another one for my surrounds, rear surrounds, and heights. It will be SE only so 125w per amp module in stereo.... surrounds and rear surroumds will be internally biamped in the amp with 125w for horns and woofers. Now I need to find out which is better...running one speaker off rhe same stereo amp or running bass on one and horns on the other. Sent from my SM-T830 using Tapatalk

170w to each compression driver, and 370w to each pair of woofers.

2nd cabinet is now ready for horn and drivers, and I have to say the carpenter did a better job than the first one by far. The third cabinet will start in a couple of weeks and it will be a rectangle that will be installed like most k402s are. It will be installed on top of a custom rack that will house my 6 channel amp. Hopefully by Xmas I will have a 2nd amp built.this amp wil lbe similar to thecurre t amp but will have 6 stereo amps with 2 Minidsp 2x4HDs. Sent from my SM-T830 using Tapatalk

In Mexico they assign you seats and make sure that no seat is assigned in front, behind, or to the sides of you...with a minimum of 6' spacing.i have been told they only allow 20 people per theater showing too. The problen in the USA is the people refuse to wear masks, and greedy theaters would pack the theater if possible. Sent from my SM-T830 using Tapatalk

I was powering mine with a 350w per channel stereo pro amp, and it was great. Sent from my SM-T830 using Tapatalk

That is because they have zero problem wearing masks, and the US is one that is polar opposite. This is why I think more and more Businesses will close. Sent from my SM-T830 using Tapatalk

Yup, not only that Amazon is buying up old theaters for local shipping too.

I watched a video on Youtube and they said the malls have been going out of business all over, and this was before the pandemic.

I do not see any reason why you cannot make movies if there are no theaters...once the pandemic is over of course. It has been increasing in price to go to a theater, and a lot of people will not be able to go after the pandemic is over. Life as we knew before is most likely going to have a lot of changes.

I have been saying for a while that the Theaters might not open again...they just put massive bucks into the renovation of theaters with power recliners. How long can they go before the Banks, and investors want their money? Add to that that rhe Movies Companies make more profit streaming. Look at what Disney just made by streaming their own movies... even when they are streamed by other Streamers they get 80% of the profit. I will not miss them, as they are way too overpriced to go to on a regular basis. I used to go every weekend prior to 2000, and then I started to just buy they movie as it was less expensive. Sent from my SM-T830 using Tapatalk

I sure miss my DTS10s. Sent from my SM-T830 using Tapatalk

A long day today...the 8 pin Speakons are no fun at all. I had to rewire several times after turning on the first time to find out why I had distorted sound, and it was the XLRs,then the speakons were the last problem. Right now I only have 1 MEH running through the new amp, and the other channel is on the p2500s. Tomorrow I will finish making the speakon cables, plus 2 power cables. Then I need to figure out how to run 12v LEDs for power indicating. The power switches had LEDs, but as I found out they were 12v and the seller never indicated this. I found out the hard way and then saw it in an Amazon review. It is so nice to be able to listen without hiss. Now I can get these tuned the way they should be. Sent from my SM-T830 using Tapatalk