zrill

Normally its about -20db to -25db. Its already very loud. Thats maybe becsuse i did not calibrate to 75db as i do not have a spl meter. Its set by the avr itself. i dont know what is it reference to. If mid basd is from 60hz then the rf62 should be doing the job rite? Was thinking about the HSU MBM-12 MK2 but would like see if i can further improve without it.

120 in avr

I will go with RS41 then. But is there a huge diff between rs42 and rs41 if i cross them at 80hz in my room? As for my sub, SVS PC12-NSD, there low bass is great but its lacking the tight midbass in gunshot chest pounding effect. Will the RF62 help on this?

Thanks for the input. Can i cross them at 80hz? Saw the spec its 84hz

Thank you for all of your input. Really appreciate it. Looks like ill be getting the RF62ii and RC62ii. But i do hope the 608 have enough power. As for surronds, is the rs-41ii ok? As the rs-42 is way out of budget. The speakers will be placed at the side and about 4' above ear level. Horizontal position from the side walls to the listening position is about 3'. I can't place them lower as there is a door on one side. Should i tilt it if its 4' above the listening position?

Hi All, This is my first posting. Im from Malaysia. Been going through this forum for a couple of months. I have decided to upgrade my speakers. Firstly my details: 1) Room size is 10' W X 12'L X 9'H 2) Mitsubishi projector with 92" screen 3) Seating position about 11' from screen. Chair right at the back wall 4) AVR: Onkyo 608 5) Sub: SVS PC12-NSD 6) Setup is purely for movies My current mains, center n surrounds are some cheapo old speakers. Im not sure which combo should i go with. I hear many says go with 62, but some says go with 52. Im confused. I wrote to Klipsch but yt to receive a reply. I would like to know from the expert from this forum. I do not have the chance to demo both of it as the dealer do not have any demo units. 1) Is the 608 powerful enough to power the 62? 2) By going with 52 what will i be missing, since i have the pc12-nsd sub for the bass? 3) From a blind test do you think you will be able to tell the diff from 52 and 62? 4) Price for the RF52 is USD1100 and RF62 is USD1250. is it worth the extra in my room? 5) Price for the RC52 is USD470 and RC62 is USD620. is it worth the extra in my room? 6) Will i have noticeable midbass improvement from RF62 from RF52? Looking forward for some expert advice. Thanks