ricktate

If it works, can you check it out before???? You can check speed of it with a phone app. then get a 100 dollar Ortofon red cartridge for it.

ILI Buy some deoxit and clean all the pots ...clean them twice once then operate the controls back and forth. Then next day clean them again junk loosens up and causes problems. Then get some furniture grippers for those sweet Heresy's i see they are on hard wood floor. Oh and get that turntable off the speaker,,,lol. I had a HK630 that didnt work right I cleaned all pots still didnt work right. Guy bought it from me called me said it works great....I asked him what did he do to it.....he said I sprayed the hell out of whole thing with a can of deoxit. The board and everything lol. I told him if he ever wanted to get rid of it call me back. Funny I had thought about doing just that but didnt have a can of deoxit at the time. Dam it...lol

Last time I looked you could ask anything you wanted for your own stuff. The new prices are crazy so sooner or later the used ones will follow that trend. Use to be able to get HK 430 receivers for 80 to 140 now your gonna pay 300 for a good one. He can always come down if he wishes to but he cant go up if he gets a lot of people all of a sudden. If you dont like the price dont buy them... simple right???

Loosen and retighten all the connections on the buss bar. If they are sitting on smooth hard surface use furniture gripers on the bottom. I would recommend Crites kit for update on crossovers. I dont think Cornwall 1s had removable grills so that may have been updated. The woofers may not match but are ok. Make sure all drivers work by putting towel in mid horn to hear tweeters and cover tweeters to make sure mid driver works. Replace gasket on back panel if it looks bad.

Did you order from Cory??? I dont think your sub will keep up with K-horns dont need it anyway.

HAPPY HAPPY BIRTHDAY.........TO YOU.

Well Eon is working on getting there. His brother has been working on a food supply system that seems like it will work. I forget what his brother calls it but it looks promising for earth also. With battery day the other day the big 3 are dead they just dont know it. Kind of like when Elon and Kimbal went to yellow pages office to help them get online in the 90s i think. The guy there threw down a yellow pages and said. '' your going to replace this???'' Kimbal told the guy your already dead you just dont know it. https://www.bing.com/videos/search?q=elons+musks+brother&docid=608043468125964614&mid=BA0AF332710D2C69775BBA0AF332710D2C69775B&view=detail&FORM=VIRE

Mathews.....Always loved the Belle look on Scalas. How you been have not seen you on much ...but I dont get on here as much as I use to eithier.

I think fair price considering how much new ones are. With ALKs and original crossovers included more than fair. I would never sell mine but if I did I would have to have more than 3000 for them.

Call Cory he carries Parasound and AVRs in addition to Klipsch speakers.

I would wait till you can just make 2 separate systems. But to get much difference you have to spend a lot more money cause I think your current system is pretty good. I guess your AVR now wont let you run just 2 channel for music???? My Integra is set up to switch to stereo on all my music like turntable...radio...CD..etc.

I would just build new type As with caps from BOB. Take them diodes OUT ........More simple more better...lol

I think he has to special order those not sure just call him.

Tighten the screws holding horn to motor board......go back to 8 ohm setting on amp.....check polarity again.....seal into corners.....check washer on mid horn I used an O-ring on mine..... get different amp if it still sounds wrong to you. If your close to one of us im sure we could bring over a HK430 ...dynaco st70 or something to try. Im from KCMO area.

I would recommend going to 4500hz crites mod with crites tweets......or just going with type A crossovers if you want to keep it cheaper and simple. I have done the 4500HZ mod on my K-horns and just went with type A on my Scalas. You going to do the mods yourself??? Or have Crites build them for you??? Type A crossover is simple to build. My Type A is not pretty but works perfect. I did change the Inductor on my Khorns on the 4500HZ mod.

Did Klipsch use fluid in tweeters ever??? Never seen one. I think you need rebuild kit for crossovers from Crites. Then put dyna mat on the mid horn. Make sure all screws on horn are tight.

For your next upgrade you should call Cory https://www.paducahhometheater.com/ and look at Accessories 4 less for your AVR.

Did you ever figure this out???

Looks like the R and L speaker will still interfere with picture to me....would have been cheaper all around just to hang a good screen up in front I think.

I think off centered horn woud drive me crazy....But its his place.

Due to price of new ones I think you should ask more money for them. I say do not take less than 1500 for them they sound like they are worth every penny.

I think they are over priced I would buy used older ones my self.....for less money you can get used LaScala and be even better.

Call Cory before you buy.....https://www.paducahhometheater.com/

No I just screwed at the joints then put a veneer over the original wood. I think I put 3 screws in each joint so that was 9 per side. But it did really work. . Mine do not move at all with out a lot of force to the sides now. I think I used 1 inch dry wall screws then filled holes and veneered. It was a while ago wish I had taken pictures. Pic of veneered front panel

Those seals are worn out bet on it......thats why all that lint is stuck on there. That front and rear seal wears out on top and then leaves a gap on bottom of drum you cant see. Also need to lube all those wheel bearings and the belt bearing i bet its turning slower than it should.