Tiziano

I measured the DC resistance and it is 11.3 ohms, so what should I put as an impedance? what capacitor value should I use? Thank you so much if you can help me

On the Driver impedance box, do I have to set the nominal impedance or do I have to measure it with a multimeter? Inviato dal mio G8141 utilizzando Tapatalk

Thanks for your kind explanation. I have version 2 of heresy. I will try as you advised me. Inviato dal mio G8141 utilizzando Tapatalk

This is the crossover that I use on heresy, when I took these speakers practically had the mobile destroyed and totally missed the crossover, looking for I arrived here and I saw that this model was given as crossover for Heresy 2 and built it, not having the original autotransformer a friend gave me two T2A to try, and was practically used with the output - 9 dB, but I've never been convinced it was the right thing, so I ask you if you can adapt this T2A on my heresy. Sorry for my bad English (Google) Inviato dal mio G8141 utilizzando Tapatalk

Could you help me on how to do it? Inviato dal mio G8141 utilizzando Tapatalk

Hello everyone, I wanted to know if it was possible to use the T2A autotransformer on the Heresy 2 klipsch to attenuate the squawker at 12db thanks a lot Inviato dal mio G8141 utilizzando Tapatalk

Not a lot of 2 dB less than the original configuration [emoji23] Inviato dal mio SM-A510F utilizzando Tapatalk

Hello to all. I have klipsh heresy 2, to which I rebuilt the crossover with better components: As you well know the auto-transformer of heresy 2 has no other attenuation levels and wanting to reduce by a few dB the mid horn, I was wondering if I can use the t2a autotransformer that I am at home, with the exit -12dB. Can I use it or are the impedance values different and can they change the crossover frequency? .........

Another good driver is: eminence beta 12. It has a similar response to the Delta Pro, with a few dB less. The cost is lower. I enclose a simulation with the ventilated box of Claude J1

Hi guys, I have the components to build a couple of heresy 2, but I miss the crossover, wanting to replicate it is possible to replace the autotransformer with an L-pad? are there any contraindications? Or quality will always remain high? Thank you so much to all of you