RLink
-
Posts
172 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by RLink
-
-
Interested in purchasing the Heresy 4 or Cornwall 4 but having difficulty determining what the grill looks like. On the Black Satin speakers, it's looks almost grey or silver in color yet on the Walnut versions the grill looks almost to have a gold or lighter look to it. I can see clearly on the Distressed Oak Heresy the grill is off White.
Wish I could just go into a store here in Tampa and see for myself but no one stocks them.............Any assistance is much appreciated.
Thanks.
-
As a long time fan/customer of Klipsch speakers, I was thrilled to see that they are going to be the distributors of Pioneer/Pioneer Elite (don't care much for Onkyo) in the United States. Klipsch has a reputable dealer base out there and hopefully we will start to see Pioneer products showing up as well. I know there are many brands of audio equipment out there but in my opinion Pioneer Electronics was the leader and innovator of so many products for several years. Hope this will allow them to remain a player and stay afloat.
-
1
-
-
If it does it again, I will not use ARC and CEC and try that.......Thanks guys.
20 hours ago, HenrikTJ said:Hi
Never had that problem, however it seems youve already isolated the problem. Have you tried troubleshooting your apc? How often did this happen?
Tried that and no issues......The unit does it on average about once a week or at least that's when I notice it, not sure about middle of night although never saw it on when getting up.
-
Looking for any assistance with this issue. I recently purchased a Pioneer Elite SC-LX904 receiver and absolutely love it except for one weird thing. It will sometimes turn itself on for about 2 minutes and then shut itself off. I have it hooked up to multiple audio/video devices but starting to suspect it may have something to do with my Sony XBR-65x900F and the ARC function. I also have a Furman Power Conditioner but tried just plugging the receiver into a wall outlet and that didn't do anything. I now have the Sony plugged into a wall outlet and so far it hasn't done it again but it's only been about 5 days.
Just curious if anyone else has ever had this issue and how to best correct it. I did try unplugging various devices to maybe isolate the issue but that didn't work either.
-
Thank you, wanting to try a pair of Heresy or Cornwall 4's.
-
Can anyone please confirm whether or not Klipsch is still building the Heritage Speaker line right now or just shipping what they have left?
I know they stopped for awhile but unsure where it all stands now...........Thanks.
-
I prefer Pioneer Elite over Yamaha and Denon. On Amazon if sold and shipped by Amazon, you get some really good pricing and the 3 Year Manufacturer Warranty. They have also stepped up their customer service since being taken over by Onkyo......you get to talk to a real person.
Good luck with your purchase.
-
1
-
-
On 1/30/2020 at 4:05 PM, RLink said:
I will try running the HDMI cable from TV input to blu-ray player output and the RL analog plugs to an input out the receiver to see if that will work. If not, I'll opt for the HDMI Convertor box, it's not that expensive to try................Thanks all for your assistance with this.
DON'T NEED THE CONVERTOR BOX, IT WORKED JUST FINE.......THANKS AGAIN ALL.
-
1
-
-
I will try running the HDMI cable from TV input to blu-ray player output and the RL analog plugs to an input out the receiver to see if that will work. If not, I'll opt for the HDMI Convertor box, it's not that expensive to try................Thanks all for your assistance with this.
-
In need of assistance please. I have a 2 channel stereo receiver that only has analog inputs, no optical or HDMI. I also have a Sony UBP x1100ES Blu-Ray player that has both optical and HDMI. What I want is to be able to watch Blu-Ray movies and listen to the sound through my stereo speakers. Amazon has an HDMI convertor that appears to be able to do this but I'm just not sure. Looks like I would take the HDMI from the TV and then pass through somehow to the Blu-Ray player and then stereo receiver.
Thank You for any assistance with this set up....
-
It was cool to hear them and see them together but when using a surround mode it was difficult to match the sound quality together. I would almost hear like an echo and doing any room adjustments didn't do that much. I would finally get it balanced but not worth the effort to do that all the time. Just listening to stereo was great and it did apply ample power. You think explaining this to me was bad, you have seen me explaining how to put everything on with my wife.....Need to keep it simple so decided the overall benefits were minimal.
Still, I learned a lot and very much appreciated your help...........
-
20 hours ago, glens said:
The way I now understand it:
- You want to use your AV unit to select sources and control the volume (and presumably there are surround speakers - though that's only material if you need to match volume levels for all the channels - which will work just fine).
- You want to use the 2-channel receiver only as a "power amp" for your front left and right speakers, fed from and controlled by your AV unit.
What you need to do is feed the 2-channel from your AV's "pre out"s, to any high-level input (Aux, CD, Tape In, etc.), select that input on the 2-channel, hook your speakers to the 2-channel, adjust the 2-channel volume to the necessary level - which it will thereafter always stay at - and you'll get done what you want to do. I'm guessing the 2-channel volume will be at the 2 o'clock setting or thereabouts when you get done. Start at 12 o'clock (or "half-full" volume).
The detailed instructions I gave you in answer to your PM will work, but I think I had the units reversed. What you're looking for as a starting point is to have the "fed unit's" pre-outs to be at the same level as what the fed unit is being fed (the "feeder's pre-out level"). If you carefully review my instructions that should make sense. That would be the best starting point for the "fed" unit volume setting, but you can adjust it up or down as needed.
If the "fed" unit's pre-out is at the same level as what it's being fed (the "feeder's" pre-out level) it will be all the same as if you were feeding the "fed" unit's power amp via "power amp inputs", if it had them. You achieve this via the fed unit's volume control, but once properly set you will not change it - ever. Which is why you might have to put a piece of tape over the remote control "window" on the "fed" unit if your remote speaks the same to both units. You don't want the "fed" unit's volume control tracking along with the "feeder's" volume control whenever you adjust your system volume.
This is aggravating to me because it's so simple and I can't seem to get the point across. I'm not mad at you, and am glad to help; I just wish it weren't so damn difficult to do so!
I GOT IT FINALLY................THANKS FOR STAYING WITH ME ON THIS.
-
I see where I confused you Glens, I meant to say I want the AV to be the source. I will do what you said in the PM but reverse the units per your direction.
Last question, I promise. So do I hook up my main speakers to the AV unit or the two channel and leave them like that.
Thanks again for all your assistance everyone...............I will get this.
-
Nothing I have tried here seems to work. My goal was to use the AV Receiver (Pioneer Elite vsx 33) as the main source since all my surround speakers and other equipment are hooked in the back. Hoping to just use the two-channel (Pioneer Elite SX A9MK2) as an additional power source. Right now there is no equipment hooked up or any speakers?? Unfortunately both units as I've indicated have PRE-OUTS BUT NO INPUT.
Thanks for all your assistance with this............
-
1
-
-
This place does deliver and more than once.................Thanks Again.
-
1
-
-
I see the headphone out put Jack..........and I also already have an optical cable from the TV that I was hoping I could convert to RCA. Starting to look like both methods would work.
Thank You so much.
-
I changed the Sony Settings menu to "External Speakers" and that didn't work. It made the TV sound fixed but no sound out of speakers.
I have the Sony XBR 850B model and just checked the manual. Hard to read but I believe it says IN where I had the RCA cables. Didn't see anything about turning on RCA outputs.
YUK!
-
Good afternoon. I have a two channel Pioneer Elite SX A9MK2 stereo receiver. When I had cable, I was able to listen to the TV through my speakers utilizing the Auxilary input and running RCA cables to the cable box. Well I just got rid of cable and now have YouTube TV, Pandora and others and tried connecting RCA cables on the back of my Sony TV directly to the Receiver Auxilary and get no sound on the speakers. I get it on the TV but no longer through the speakers. This receiver has all analog inputs, no HDMI or Optical cable capability, everything is via RCA cables.
Any assistance is appreciated..............Thanks.
-
3 hours ago, Khornukopia said:
Cornwall 3's............
The SX-A9mk2 looks like a good quality receiver. What speakers do you have?
-
Thanks so much for your advice.............Would like to utilize the 2 channel receiver as the main source but will experiment as suggested.
Happy New Year.......!
-
S000ooooo plug the RCA chords from the VSX 33 pre-outs output to the SX A9MK2 inputs using the Aux or the other way around? Makes sense Emile if I can do it right.
Honestly, just trying to find a home for my two channel SX A9MK2 channel receiver and not purchase any additional amplifer and this crossed my mind..............Thanks.
-
I had the R-115sw with no issues, sounded and looked great.........The new SPL-150 is a terrible design and hard to believe the best they have right now...........YUK!
-
1
-
-
Hi everyone. Question, I have a two channel Pioneer Elite Receiver SX A9mk2 that I was hoping to utilize the Pre-outs on the back to connect to my Pioneer Elite VSX 33 Receiver for more power. Both units say I can add an additional amplifier using the pre-outs but, not another receiver. Where I'm confused is it looks like an amplifier would have pre-out inputs. Both of these receivers have a Pre-out OUTPUT!
I'm guessing I can't do what I want but looking for any assistance or confirmation...........Thanks so much.
-
2
-
-
Original owner selling this "Excellent Condition" Subwoofer with minimal use and the WA-2 Kit that was never used!
Comes with original box, user manual, everything that came in the box. AVAILABLE IN PALM HARBOR, FLORIDA FOR $425.00.
IF YOU DON'T WANT/NEED THE WIRELESS KIT THEN THE PRICE FOR JUST THE SUBWOOFER IS $375.00.
Thank You..............................................................................................................................................................................................."SOLD"
-
1
-
Thank You for any assistance with this set up....
Heritage speaker Grills- What Color are They?
in General Klipsch Info
Posted
Interested in Cornwall 4's in Black Ash but the new grill looks almost silver versus the American Walnut looks to have a softer tone almost golden in color. Same question applies to the Heresy 4's.
Thanks for any assistance with this.