MookieStl

Word was you were in town visiting you daughter any way. All the cash was gravy. And you stole a license plate off our parking lot while there too. I thinks @Shaun K ended up with those Chorus.

Rumor was they were made in the same factory Really is a nice unit. I might put a Pioneer sticker over the Realistic. (yes, I am that superficial)

Change of pace from all the high rent district stuff you lucky guys have been posting. A lowly Realistic receiver from back when they had good stuff made. (actually a MOSFET design). A snake oil salesman conned me into buying this. Dont regret it at all. It also heats the room up nicely on cold winter nights. @Woofers and TweetersFits in well in my manloft.

The corners were not that bad and did not have any coating like what you described. Mine were cast pieces and so are the ones on my LSI splits. I did buff them slightly but not much.

I did what @chassell did on some beat to hell trim on and HIP! So beat up, the trim was given to me. I buffed with a DA sander then did the scotchbrite by hand. It is a fair amount of work but worth it. I too did not go all the way down to get the deep grooves out, but just far enough to make them look presentable. They are supposed to look "industrial"!

I hope dtr20's suggestion works for you. I know you want to stay original, but if it ends up you cant, several here have used Mojotone cane fabric. Google them, search "cane". They have two that are close. I used the tighter weave but the looser "English" weave should word as well. They dont have that second layer that you see up close on the original but from a couple feet away, look very close .

Very well put Tom! And your diplomacy is admirable.

Haters are going to hate. Chevy hates Fords, Fords hate Mopars........ Most that dont like LS have never heard LS. Some never heard them done right either. I have never had anyone listen to my LS or Belles and not agree that they were the best speakers they ever heard. I've heard better but only cuz I've heard Khorns

Fairly lateral move in my opinion. Not worth the effort or shipping. I much prefer the 120 (in my little mind). That would make it worthwhile to me.

I'll trade you a pair of K77 for your CT-120's

Happy Birthday Dean!

Great job! I always love a good build thread. I have used all of these listed components at one time or another and they all perform very well. You should enjoy them for many years to come.

did you just thank yourself?

I am by no means an expert or historian, but this is what I have always thought to be the case. The AK, along with the AL and AB crossovers were introduced to be used with the K55M. Timing may have differed due to inventory or contracts or first mass production of the 55M and a number of each style would have come out with the remaining 55V. Much like the many Heresy 1.5's out there that have the rear mounted drivers but have the E2 xover and the K53 driver as the transition was a process. None of this is matter of fact, just the way the story has been told to me. Makes sense but unconfirmed. Maybe try the "Ask the Historian" section of this forum.

I built a complete HIP following mostly the Super Heresy recipe. Not much room to improvise. This is with the CT120 tweeter and the Delta 12LFA woofer. I could not change the sizing due to using a set of HIP aluminum trim that a nice member here gave me. Did you resize your cutout for the woofer as well. I don't think the woofer Claude recommends is the same size as the K22 slightly larger cutout and overall diameter. I know the Delta is larger .

I gave my daughter one of those when we refinished her kitchen. It is a very nice sounding unit. Plenty of bass if positioned properly. Just bought another one for her uncle who was amazed at hers. There definitely is some software (firmware) tweaking going on with the sound. It is compensating for the physics of this small unit. Sounds like yours is overcompensating a bit. Hopefully it is just a reset, give that a try. Both units we are using seem to be working as designed. Good luck.

Merry Christmas, everyone!

My LS sound wonderful too. Not sure who is doing what wrong and/or what I am accidentally doing right, but they sound great. Both sets and both sets of Belles. Enjoyable is the right word Riche!!!

I don't really think anyone is bashing the Klipsch engineers. They have made many x overs and changes to improve them as well. Some have to be better than others. Not all can be homeruns. Some changes are made due to availability of materials or a change in another component or weakness discovered in a current component. They are also restricted to cost/ROI of materials and need to take production capabilities etc into account. The engineer has to decide when the law a diminishing returns comes into play. If you are building or tweaking one or three sets, costs are one thing. If you plan to make hundreds and hundreds, small costs add up. Tweaking or tinkering is part of this hobby. Good, bad or indifferent, it is what it is. Love my Klipsch, the ones I've tweaked and ones I haven't.

RIP Roger.

You would be surprised how well they gel (with Belles in my case) BUT not for every situation or room. Mine are in a small (12 x20) living room with no place to put another speakers, so underneath it goes. I use 200 watts not 25 and the two keep up just fine with the mains. just the little boost from 80hz down to around 25hz. Like you (if I guess right) I just enjoy building things and experimenting. I have built about a dozen of these for several people. Some were knocked out, some were underwhelmed. I have other set ups with another set of Belles and two sets of LSi. I use different subs for each, just for the fun of the game. All sound good to me and were worth the effort put forth which was fun so actually no effort. Enjoy the hobby

Yup. Turned out nice and added that little kick at the bottom end.

Miss Jane Hathaway vs..... Abstinence One vote for abstinence here.

I have the same amp and never heard the fan either. I would put my hand behind the amp just to make sure it was on.

Congrats dtel! You work your butt off on that museum. A little recognition is a good thing.