Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by Maximus89

  1. Will take a trade of Heresy II in any condition preferably with risers + cash for the Forte III Sent from my iPhone using Tapatalk
  2. Thanks Kalifornian I also have a pair of Chorus II I’m selling. They’ve got ti tweeters and I currently have ti mids in them but have the stock as well. They’re definitely not lookers. But in this Texas market I’m not looking to give them away due to looks as I paid more than I’d be willing to sell them for in worse shape plus ti tweeters($60) and ti mids($175 iirc). So if anyone wants a front stage of Chorus II and Forte III center- here’s your opportunity. Also will list a pair of 76 raw fir KHorns with AAs, round alinco k77s and K55v Separate list- pair of Dean made AAs using Audiocap PPT thetas- mids dialed back -6db I’ll list the chorus II and khorns and Dean AAs when I get a chance Sent from my iPhone using Tapatalk
  3. This Forte III arrived damaged. Repairs done myself. Titebond II on motorboard, siliconed inside edges. Major veneer damage at top corners were replaced with walnut veneer cut outs-best I could do. Another one on the left top side. Other veneer damage was just filled with walnut filler as I didn’t want to mess with 2 corners of the edgeband and side or top veneer. Riser has crack in the veneer at the rear but barely noticeable. Doesn’t have the copper jumpers, but wire is better anyway. Sounds perfect. Has paper work and original box. $600 local pickup Sent from my iPhone using Tapatalk
  4. Yes I got a steal for the forte III in reality. Repairs weren’t a big deal for me. Titebond and clamp all the loose cabinet splits. Sealed the inside edges to ensure no air leaks. Walnut veneer cut outs for badly damaged veneer except where you see in the front top and right side near the edge band where I didn’t want to mess with it, so I used walnut colored wood filler as best I could. The risers were split open but luckily clean breaks so glue and clamp actually put them back together nicely. Only one clear break point where you can really see the wood filler and it’s on the back of the riser that can’t be seen. Overall I was happy with the repairs and I can easily veneer the entire thing again custom if I choose to. 1k for HIIIs would be nice but when approaching that price, I’d rather just get another Forte III to make a pair. It’s not completely set in stone that I have to sell everything. It all depends on if I have to move to a small apartment or not. Sent from my iPhone using Tapatalk
  5. Oh yeah. My single forte III arrived with split open cabinet and broken riser and dents etc. I repaired it myself but it’s still obvious there was damage that’s why I couldn’t get proper value for it Sent from my iPhone using Tapatalk
  6. Joking about what? Sent from my iPhone using Tapatalk
  7. I want Heresy IIIs I’ve got to sell off my Chorus II and KHorns but I was looking at HIIIs to keep my itch satisfied. Still. Probably can’t do 1k so I’d have to settle for used HIIs. Do they still do the II to III upgrade package? Maybe I can trade my single Forte III for a pair of heresy IIs Sent from my iPhone using Tapatalk
  8. Hell yeah!! Lmk next time I can come and listen to some multi channel music! Hope you’re doing good! Sent from my iPhone using Tapatalk
  9. But game of thrones will be over by 2020 [emoji20][emoji16] Sent from my iPhone using Tapatalk
  10. Well that’s just my inexperienced thought. Maybe it’s easier than I imagine to veneer rounded edges/corners? Maybe special veneer I don’t know about that doesn’t break when bent? I really don’t know. Point me in the right direction if you know- then maybe I’ll consider industrial la scala splits again and veneer them in beautiful walnut Sent from my iPhone using Tapatalk
  11. Pro is expensive. It seems like there’s this misconception that bc they’re pro and don’t focus on aesthetics for the home with costly wood veneer- that they’re cheap or at least similar in cost to the heritage and reference lines. They seem to be much more costly and then add the fact that there’s not too many people who can get away with using them in a living room and they’re not friendly toward DIY guys who would like to veneer the cabinets themselves due to all the rounded/beveled edges etc and odd shapes. I can also see the specs turning some off in terms of low end. I personally wanted to go this route and was shocked at the price I was told for the Ki-396-II or the 362-II I was interested in Sent from my iPhone using Tapatalk
  12. @Delicious2 do you have any photos of how the K402 looks on top of the KHorn LF?
  13. I got my Klipschorns for $700 back around September that’s why I’m looking at options. Thanks for the info! Craig told me how you helped him with his set up. It sounds amazing! Sent from my iPhone using Tapatalk
  14. Wow thanks for the detailed response. I need to learn more but already seeming to push me toward just preparing one day for jubes Sent from my iPhone using Tapatalk
  15. Has anyone done active 2 way khorns with k510s? Do they work well together? I recall Roy saying the la scala dog house is closer in design to the jubilee LF than the Khorn. just got done demoing @Born2RockUs Jubilees(LCR Jubes with faital pro drives and Danley sub) for the first time and I’m blown away. Can’t afford to go Jubes with K402 so looking at different options. Could potentially go Jubilee with K510 if I sold most of my speakers including the Khorns but wondering if the Klipschorns LF with K510 would sound good since I wouldn’t have a sub and the low end of the khorn sounds great in corners to me.
  16. You also have a lot of raised grain. You should remove the speaker components, and use some mineral spirits to clean the cabinet and raise the grain and then sand them down before using the minwax weathered oak and classic gray stain mix I’m personally interested bc my Douglas Fir Klipschorns need to be restored and I think veneering such a large cabinet is too big of a move for my first veneer work so I was thinking of repairing damaged veneer/filling in and then sanding down and using the weathered oak and classic grey stain to create a distressed oak look and get lambswool grill fabric. A project for when the weather gets warmer Sent from my iPhone using Tapatalk
  17. I like the grey riser better but I think you should have and still can do the method that finebokeh used. “I used Minwax wood finish penetrating stain, a coat of Weathered Oak 270 followed by a coat of Classic Gray 271. Given a second chance I would experiment by mixing the two stains together in different proportions rather than using two separate applications. It is finished with Polycrylic clear satin.” https://community.klipsch.com/uploads/monthly_2017_10/klipsch1.jpg.7f3c6cf1b18c4627f5f30cb4a9df3698.jpg Should be cheap and easy to do right over what you’ve currently done and it looks spot on to the distressed oak forte III Sent from my iPhone using Tapatalk
  18. My Khorns aim directly at me with zero fatigue(Dean dialed the mid's back on the xover), my past La Scalas made my ears feel like they were bleeding when facing directly at me so i faced them straight with no toe in and i liked them. My Chorus II were always toed in slightly to the back of me. I never stopped tinkering with the Chorus and i continue to tinker with them in the open floor plan living room for HT(and some times music). Very slight toe in right now. Still nothing sounds good because the room just doesn't work for audio. I can only get it acceptable when i bring out the speakers far into the room like the cardas rule and face forward with no toe in and use 2 subs with it.
  19. Wish I pulled the trigger on one when I had the chance. Sent from my iPhone using Tapatalk
  20. Is that raw oak? Sent from my iPhone using Tapatalk
  21. All connected and put back together! Gonna try a little mono session with some stones and Beatles. Sent from my iPhone using Tapatalk
  22. Thanks dude! I’m happy. For $268.05 + profit from selling the KLF-C7 I don’t need anymore. It’s a hell of a deal. It’ll be mostly out of sight aesthetically anyway, but very happy. I was hyping myself for a Chorus III project but nah. I just don’t have it in me to do mods especially involving wood working to make the Chorus II mid horn cut out smaller to fit the Forte III horn. Sent from my iPhone using Tapatalk
  23. It’ll need to be veneered all over again in the future along with the Chorus II to match but I’m just going to enjoy for now. All that matters is it’s structurally sound for now. Sent from my iPhone using Tapatalk
  24. Everything sealed up. Gaps filled. The major damage was just to difficult for a noob like me to fix. The worst front right corner and the front left corner. Just couldn’t be fixed well enough but it’s fine for now. Up close you can see the timber mate walnut wood filler I used, but it’s whatever. That worst right corner, I had no choice but to cut out the broken veneer and flatten out the warped mdf and apply a piece of veneer but the damn thing chipped up. I tried to match the streak of the grain as best I could. I don’t know how to get the dark lines from the oil filled in. More wood filler? Overall it’s fine. It’s going up high on an entertainment center horizontally. Sent from my iPhone using Tapatalk
  • Create New...