Jump to content

Maximus89

Regulars
  • Posts

    828
  • Joined

  • Last visited

Everything posted by Maximus89

  1. So I'm getting fuses. AGC 1.5 A for the tweeter and AGC 3 A for the LF just like its marked. Only problem I have is that I don't have any fuse holders. Would any work? This one says it's for the same size that the fuses are:
  2. Can I remove this paint that got into the bug screen? I've never removed a diaphragm on these so it looks like it requires soldering? That right? its funny that this diaphragm works, if you look at the original picture, this is from the tweeter that was completely painted. The one which barely got paint in it is the one with a bad diaphragm.
  3. I just went with a satin black paint + primer from Premium after sanding the surface smooth..it was cheap and it looks fine after the 1st coat...im keeping these as my surrounds with the idea that one day i'll put figured walnut veneer on all 4 of them(how to get the edges straight for veneering?). Couldn't find the rust-o-leum canyon black in satin spray can, only in matte/flat black so that's what I used. May have over sprayed the tweeter and carrying handle and under sprayed the mid horn(wasn't wearing a mask and it was hard to get inside to spray without it getting everywhere and still trying to see where I was spraying. All in all, today was smooth. Going for a 2nd coat in a few hours and then i'll let them sit for 24 hrs(necessary?) before I put everything back together and set it up as my center channel while I work on the next one. The next one, i'm probably just going to sand the entire cabinets with medium to strong grit and just start painting. It's so much faster and smoother a process when using a power sander instead of the stripper which of course ill still use on the horns and plastics. Sorry if it seems that I pretty much shat on most of the recommendations. I didn't want to spend too much for Duratex if I'm going to veneer over everything eventually anyway. The crappy paint strip job and picking at every odd angle with a scraper all day yesterday pretty much wore me out and I just want to get done ASAP. Thanks though for all the help!
  4. It's 1:30 am and I just finished stripping...1 speaker. I am absolutely beat. My back is killing me from having to bend for all the different angles. I still need to sand lightly tomorrow before painting. This is taking wayyy too long. I could have just sanded the white paint out of the cabinets with my sander....and what a mess the stripper left. I'd mutch rather dust and vacuum than clean that up. Paint goo all over the garage floor. Not doing that again. The only thing that really benefited from the stripper was the mid horn. It came off beautifully like one peice. Maybe it just works best on plastic, bc the metal tweeter was a pain in comparison. The wood the worst of all and of course that's the majority of the work. Just going to lightly sand the next speaker and paint over most of it.
  5. Just got a chance to take out the drivers. Not as easy as I thought and seems like it's going to be difficult to put back together. Now how do I remove the crossover network? - nevermind. Found the 4 screws Also can someone tell me about this type of xover and the difference between it and others? Type AL s? thanks
  6. How do I remove the drivers from this one? Just the screws all around the edges of the front baffle(not the screws holding the horns yet) and then pull forward? Simple as that? What about pulling out the K43 driver? I read somewhere about not laying it the wrong way or it will mess up the driver suspension or something like that? I assume you have to lay it on its side, just not face down?
  7. This is what I'm working with. Haven't touched the horns yet
  8. Ok great, but what about the horns? Can I use the rust oleum canyon black right over the white painted horns? Skipping the stripping process would speed everything up drastically.
  9. I should still try and use stripper to get most of the white paint out first though, right? Or should I sand it out?
  10. Those look great! Gives me hope. You just used a roller? Looks like you sanded both though, is that right?
  11. I did it to my Chorus II. They were originally black oak, and sanded them down and applied Danish Oil Walnut and I thought it came out nice: Though you're right. The Chorus was already veneered and plain plywood will probably look terrible. I'll just stick with Duratex as you said. As of right now, I think i'm going to just keep this extra pair of LSi so it's best they match and maybe one day I can start a new project where I properly veneer all 4 of them.
  12. Used an entire can of this "jasco" stripper and it's worthless. Barley removed anything. I was getting so frustrated when I finally reminded myself that I made an amazing deal for LSi sitting in my room right now. This pair I'm fixing up were basically free throw ins, so I have to relax and be patient and quit bitching. Later today, i'll go get some Citristrip and focus on one of the speakers with all working drivers so that hopefully I can get it all done in time to use as a center channel for Game Of Thrones on Sunday night. If it comes down to it, the entire speaker cabinet is plywood right? How ugly is it if I removed all of the black paint via sanding(I did it to my Chorus II's)? What would I be looking at if I just took it down to raw plywood and threw on some Danish oil with walnut stain in it? Pretty ugly?
  13. Tried the second bad one. Woofer works. Mid works. Tweeter doesn't work so....what is it with the fuses? I do need them to work?
  14. Just put the fuses from one good speaker into the 1 bad painted one and to my surprise it worked. The mid and tweeter sound fine. Only problem? Woofers not working. Let me try the other bad soeaker next
  15. Ok let me take the fuses from the good ones and put them i these to test
  16. Yes I'm testing the white painted ones right now and no signal. The black ones are in my room connected and they have the fuses and they work fine. These white ore ones are dead silent
  17. Everything inside seems to be okay I guess? What could cause no signal at all?
  18. Ok so I just plugged everything in and there's no sound at all. Maybe it's something I'm doing wrong. Let me double check. nope. I just plugged my little JBL 2600 and it works. No soubd at all from Fein these La Scalas. like I said, all I know is thee fuses and fuse caps are missing and the tweeter got paint in there. As far as I'm aware, the woofer should work
  19. Yeah so basically i think its mdf/plywood with a duratex paint over it. Not sure what i'd use for re-paint the horns though. The horns are plastic right? Serial says 89 and they do feel like plastic but i just took a closer look and they have like waves that almost look like wood grain. sweet, so i can just plug and play! I need to go do that test right now!
  20. Both of those photos are from the painted pair that needs work. These are the ones i already got set up, not too bad but they did get some paint splatter as if they were sitting next to the ones that were being painted. I imagine it was like a scene out of Deer Hunter but with La Scalas. These guys had to watch their brothers be destroyed. (excuse the messy wires all over the floor and yes these guys beg to be in a bigger space.)
  21. I'm not quite sure what's going on with the fuses....are they not necesarry? I can basically connect the positive and negative to a receiver and they will start playing? I was under the impression that i cant get any sound unless i get those fuses. Is this correct? If so, i can go plug them in and listen to see if all the drivers are working. I guess if that's the case, i'd still like to know what the purpose of the fuses are.
  22. How am i supposed to see the grain of the wood? It's a black ..duratex i guess? I was already looking at the Citristrip stripper so i'll go with that one. Any recommended spray paints? Different one for the cabinets and a different one for the horns?
  23. So last night I made a great deal where I came home with 4 La Scala Split Industrials. 1 of the pairs just fine and already hooked up. The other pair are fixer uppers that he basically just threw in. Here's what is 100% certain according to the previous owner and what I can see. - 4 total Fuses + 4 Fuse Caps are needed. - 1 Tweeter diaphragm needed(paint got deep in there). Everything else is unknown to me and unknown to the previous owner. I've never owned any La Scalas or any industrial Klipsch speakers, so I need guidance if driver removal is beyond simply unscrewing the front of the top and sliding it out and unscrewing the bottom of the bass bin and sliding it out. Tutorials on process of removing everything? Not sure how I test each driver for functionality and testing the crossover other than manually swapping out with the good pair in my house(seems like there's got to be an easier way). I'm not savvy at this stuff. But, making sure I know what parts need to be replaced is my first priority. From there, I obviously need to remove the white paint(Church?) that is depressingly all over the horns and tweeter. Tips for removal? Just any stripper will do? Metal or plastic scraper? Then from there, how do I go about painting it? Spray paint? Brush? What type and color? What material are these?
  24. is that a good price for that condition and AL-3 crossover? He says the AL-3 xo was put in 7 years ago.
  25. Could the parts from a Heresy pro fit right into a Heresy 1 cabinet? What about the crossover cup?
×
×
  • Create New...