mustang_flht

Yes 😜

👏 This 😉 or this🚨 😁😁😁

Hi @Patrick D HiFi Here is the diagram of your type D, if you want to replace the capacitors: just buy 4 x 2.0µF in MKP and your heresy will be in great shape ! Keep your old brown capacitors in a drawer so you can go back 😉

Ok, good night 😉 Edit : in the text of the march 1987 Nouvelle Revue du Son N° 106 test it says that they are testing the AK-2 model ☺️

Here is a test bench of Klipschorn published in the Nouvelle Revue du Son in 1982, with beautiful measurement curves. But these are photos of the article, so I don't know if a software can translate this text into English? I don't think this is the article @garyrc is talking about, because it doesn't say: the Khorns as "the new version,"

Hi, I will do a search to see if I find this article. @garyrc @billybob you don't have a photo or magazine name of this article page on KHorn review ☺️

Hi Type AA, man ☺️😉

Hi, And the MOTO-GUZZI 500 V8, the best sound of motorcycle, Forza Italia 😁

And yet 911 is Ladybird's Beetle half-sister, they have the same father and the same architecture! ☺️

Hi @MMurg Nice restoration, well done! If you want to put the same grids as your Jubilee on these Belle Klipsch! Contact Duracrest https://www.facebook.com/DuraCrest-Fabrics-Inc-153264688215254/ https://www.google.com/maps/place/Duracrest+Fabrics/@41.9911951,-87.9421923,15z/data=!4m5!3m4!1s0x0:0xb7d00cc47d69dbd2!8m2!3d41.9911953!4d-87.9421786

Hi @mboxler I do not know

Hi @CaptainChaos Very Beautifull KHorn 😍🤩 Yes like @Crankysoldermeister : check the Marantz 😉

Use This : https://kimmosaunisto.net/Software/Software.html you can thus simulate 2µF + 0.245mH + 2µF and compare with 2µF + 0.340mH + 2µF 😉

@Scott Analog ask to @JEM Performance @JEM Performance can be reached during normal business hours at theaudioroom@verizon.net or by phone - 412-401-6915.

@radiogram No 3 Coils : Jantzen and Klipsch from the CWIII and Yes is modification, but just for the Faital pro HF103 and B&C DE120, not for original Klipsch K53Ti and K107Ti for détails look here , schema of my network is on page 2 and post of March 21, 2021

@radiogramme Ok it's noted, you are in India 😍 and no 25W resistors. I have 10W resistors on my CWIII in the sqwaker between 800Hz and 5000Hz without any problem for 2 years: they are far from the board for better cooling, as I explained to you above 😉 My R18ohms 10w green in middle on home network

Hi @radiogramme @JohnA's comment is a good thing For me the 10W resistors are already well sized, but if you want to increase the reliability of the resistors, I advise you to mount them with a space of 1/2 inch between the printed circuit and the body of the resistor: the cooling by convection will be much better and the reliability greatly increased. NO YES Otherwise you can't find 25w Mundorf resistors on the net? https://www.mundorf.com/audio/en/shop/Resistors/?reload_filter=true&p (max)_25watt=true&p (max)_1x15watt=false&p (max)_2x7%2C5watt=false&p (max)_5watt=false&p (max)_10watt=false&p (max)_20watt=false&p (max)_30%2F3watt=false

Hi @Dave McKay The risers under my Cornwall III are 2" high and they are recessed 1.18" from the edges of the body. Someone should measure La Scala II or AL5 risers for you 😉

Hi @MMurg Congratulation ! very nice set 😍 I seem to see that you have English Cyrus amps, they must work excellently with their cousin Celestion Axi2050 ☺️

Moulting cicada of Provence

The difference must be really minimal, but nothing prevents you from making an Lpad for tweeter of 8ohms and - 3dB You can test both Lpad and R 3Ohms, and listening the difference! Lpad for 8 ohms = R 2.3 Ohms serie and 19.4 // (use realy 2.2 and 20) http://www.mh-audio.nl/Calculators/att.html

Heresy II

For Mid: I d'on't Know For Tweeter section : Yes like @CANT: a resistance of 3ohms no Lpad Here is a picture of a network of HIII with R 3Ohms NB: I had shown someone on the forum how to put an 8.2ohms resistor in parallel to make only 2.2Ohms, because the guy found their tweeter too weak!

Like 001: not yet to my knowledge!

👍 and ☺️