Indyklotz

WTB 1 CF 3 woofer version 1 or 2 Part number K 1022 with Neodymium magnet. Thanks have a great day! Chris

Triceratops Email sent. I built mine a little deep just in case I get some CF 4s. I could park a car on these stands. Have fun!!!

Triceratops The stands are 16.5” tall which puts the center of the horns at 40” which is at ear-level for me. Originally, I put spikes on the stands but I found the bass to be too much. My wife wasn’t happy when it rearranged the dishes in the China hutch in the next room. They are mostly made of 2X4s, sheet metal, screws and glue from Home Depot. I can take some pictures from behind if you like.

Hi Guys First time posting here. I’m a big Klipsch fan. I have some CF 3 version 2s that I have been listening to for about three years now. I graduated from my previous favorite some KLF 10s. The only mods I’ve done are Dynamat on the horns and I built some stands to get the horns to ear level. When I first got the speakers I noticed that one driver K1022 was rubbing/ dragging on the voice coil so I swapped out one of the 10 inch drivers from the KLF 10s K1056. The physical differences that I could see is the K1022 has a much stiffer cone and it has the smaller neodymium magnet. If anyone has a spare K1022 driver to sell let me know Thanks. Recently I acquired some Polk Audio SDA SRS 1.2 TLs there flagship speakers in very nice shape. So I had to A B compare them with my CF 3s. I run a Yamaha M 85 amp and a CX 1000 pre. At first listening the Polk’s sounded great with nice base and a very wide sound stage. But when I listened to the Klipsch I noticed that the midrange was clearer and that I preferred the Klipsch base. Over the next 2 weeks I had 5 other audiophile friends over Separately to compare Polk vs Klipsch everyone liked the Klipsch better!!! got some photos to check out, let me know if you can part with a K1022 driver, looking for some CF 4s

Hi Guys First time posting here. I’m a big Klipsch fan. I have some CF 3 version 2s that I have been listening to for about three years now. I graduated from my previous favorite some KLF 10s. The only mods I’ve done are Dynamat on the horns and I built some stands to get the horns to ear level. When I first got the speakers I noticed that one driver K1022 was rubbing/ dragging on the voice coil so I swapped out one of the 10 inch drivers from the KLF 10s K1056. The physical differences that I could see is the K1022 has a much stiffer cone and it has the smaller neodymium magnet. If anyone has a spare K1022 driver to sell let me know Thanks. Recently I acquired some Polk Audio SDA SRS 1.2 TLs there Polk’s flagship speakers in very nice shape. So I had to A B compare them with my CF 3s. I run a Yamaha M 85 amp and a CX 1000 pre. At first listening the Polk’s sounded great with nice base and a very wide sound stage. But when I listened to the Klipsch I noticed that the midrange was clearer and that I preferred the Klipsch base. Over the next 2 weeks I had 5 other audiophile friends over Separately to compare Polk vs Klipsch. Long story short everyone preferred the Klipsch sound even my wife!!! got some photos to check out, let me know if you can part with a K1022 driver, also wondering what CF 4s sound like?