Staples
-
Posts
34 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by Staples
-
-
1 hour ago, McBlueMeter said:
When will info be on the site?
Now
-
20 hours ago, skorpioskorpio said:
3" diameter, 5" long, no taper or flare... Given that this was really 'designed' to compliment the KG 1.2s and 2.2s and was passively crossed over where it was, as a high pass intermediary, it just needed to rumble and echo some and give some volume back to the 1.2s and 2.2s in order to make those speakers sound more Klipschy...
Thank you. And Thanks to Peter as well.
The 2.2s and 1.5s are exactly what I was looking to match this with. I will give it try with Heresy I as well, but I'm not expecting much.
-
On 9/28/2019 at 11:17 AM, Peter P. said:
I was not able to remove one of the ports from the outside, and after removing the bottom screws I couldn't remove the bottom panel. Any secrets to removing the panel?
I just picked up a kg sw. It did not come with the plastic ports. Can you tell me the dimensions of yours, particularly the length so I buy replacement parts? Thanks.
-
2 years ago I bought a pair of oiled oak CW II with cane grills and they were a 9/10 for cabinet and 8/10 for grills. Price was $675 from a motivated seller.
I sold them one year later after recapping and putting in Ti diaphragms in the tweeters. I received $1060.
A few months later I bought CW I, black, with rough cabinets about a 4/10 and grills a 2/10 (the grill board was falling apart), but the drivers were all good. I paid $475 for that set. I have a much delayed refinishing plan.
In my area, Boston, I regularly see Cornwallis listed. Prices go up to $1,500. But, they seem to actually sell in the $800-$1100 range.
-
1
-
-
Thank you for the additional pictures. Yes, there clearly is a darker stripe down the center. I'll respond to your PM.
-
Thanks for the clarification. I was trying to reconcile the title of the post with the long list of heritage components. I didn't realize that was a separate section of the post (a default footer) which is why I asked my question.
-
1
-
-
Lost, I'm interested. The picture of the top seems to show that there is a darker band of walnut in the middle and it is lighter on the front and back long edges. Is that a trick of the light or the actual appearance?
Thanks.
-
Hi, can you please clarify: Are you selling all of this for one price of $900? Two pairs of La Scala, 2 pairs of Heresy, and 1 pair of Cornwalls? Plus everything else?
-
1
-
-
Moray, for me, if it doesn't come out of a spray paint can it isn't going to happen. I don't have air spray equipment.
I'll experiment with some textured metallic paint in black, after laying down a base coat of satin black. I'll also try multicolored textured paint instead of metallic.
For the back, I'll probably use satin black. On the grill frame as well.
For the base, a glossy black enamel.
-
8 hours ago, HDBRbuilder said:
there is a reason that the MDF panels are textured-finished on the back...plywood does not need that because it is NOT MDF...but you appear to "just not get that..." So good luck with your project!
I got that these are two different materials. What I was asking was how to mimic the textured surface because I want the textured surface. I am appreciative of the lessons and your time.
-
15 hours ago, moray james said:
satin black 35 - 38 degree sheen will look good. Do you plan to paint the parts yourself or have a pro shop do the job? You can find textured paint in spray cans it won't look identical but close enough. If you cannot find textured paint in black satin just buy the least expensive color textured they have use that and top coat it with black satin.
Moray, I'll be doing it myself. I'll try a few things out and compare.
-
17 hours ago, HDBRbuilder said:
Today's Cornwall has a non-removeable back panel, made from MDF...as is its motorboard...the motorboard uses T-nuts to accept machine screws to hold the drivers onto it. Due to the nature of MDF, the laquer is not thinned down...and gives a semi-gloss appearance which is a bit more "shiny" when dry than what your Cornwall I panels will look like using the same stuff! It is what it is!
You're suggesting that the lacquer is the same as when you built Cornwalls with plywood, but because it is MDF it creates a textured surface?
-
Yes. Is baffle the correct word? Where the components are screwed into.
And, if the back is the same as the baffle or different. I assume the black base is not textured, but is it glossy or flat.
Just looking for advice, experience, or knowledge. Such as from someone who owns one or works on them.
-
HDBR builder, I'm not trying to be difficult with my response, but my point is I simply want paint/varnish suggestions for the motor board, base, and back that is being used today in models such as the Cornwall III, Heresy IIi, Forte III. They all look similar, to my eye, from pictures on the site.
I'm not changing components, I'm not moving the woofer up, I'm not moving components to front mounting, I'm not adding a terminal cup.
I have a standard Cornwall I from 1984, CBR. B-3 network. Serial 8404603. They were varnished, I believe, after they left the factory.
-
1 hour ago, HDBRbuilder said:
PICS, PLEASE?? I built the vast majority of Cornwalls from 1977 thru fall of 1983, but without pics it is very hard to answer your questions. Pics of the labels is handy to have, also!
I can post pics, but it is Cornwall III special edition that I'm trying to mimic. So, it is less about the past and more about the future.
-
On 12/9/2018 at 12:31 AM, Maximus89 said:
You also have a lot of raised grain. You should remove the speaker components, and use some mineral spirits to clean the cabinet and raise the grain and then sand them down before using the minwax weathered oak and classic gray stain mix
I tried what you suggested and it didn't work. the grain was less raised and more open. Very deep fissures and I couldn't get anything to get down in there and affect the color. After playing around a bit, including trying to get a diluted dye down in there, I gave up and moved forward with the waxing.
Here is the final output for these two speakers. I've redone the grill cover since the picture was taken so it is tighter now. This is the look I wanted, so I'm pleased.
However, this has taken so long that I have sold the Forte II that I was originally testing all of this for.
https://photos.app.goo.gl/9BAm1nfPNPvkwRbQ9
I have a KV2 in oak as well, but the finish was different. It didn't respond well to the same treatment with the weathering solution. I tried the varathane weather grey on it and that didn't work well either. I settled upon the diluted die, a mix of grey and worn navy, and then the briwax. I'll post a picture later.
-
1
-
-
Howdy,
I've started a rebuild of a beat up pair of Cornwall I. I've got them sanded down and I'm doing edge and corner filling now. The crossovers are rebuilt with Crite's kit. I want to make these look as much like the California Black Walnut special edition speakers as possible.
To that end I've purchased some figured walnut veneer that looks similar to the black walnut look and some Wichelt linen for the grill covers.
My question is about the black paint/varnish used on the motor board, back, and base for the Cornwall III special editions.
Is this a flat black paint/varnish? Is it different on the different parts? Looking at pictures it appears that the motor board paint has a textured finish, possibly metallic. Is this the case? Does the back have the same or is it basic black? Flat, satin, glossy?
I like the look from the main website pictures and want to replicate that as much as possible.
Thanks for any help.
-
I finally took some action using a beat up pair of KG4 as the tests.
I used old masters furniture restorer to prepare the surface.
I sanded to get out water stains and other damage, working towards 220 grit.
I prepared a weathering solution using steel wool and vinegar.
I applied said solution and what I got can be seen in the pictures. As you can see it did not penetrate into the open grain of the oak. So, I have gray on top and brown in the grain.
In one picture you can see a riser which is a lighter gray. This is the same as above, but I finished by applying liming wax. This filled in the grain and made it white and lightened the overall look.
My wife likes the gray and brown more than the gray and liming wax. I'm undecided.
What do those on the board think?
My intent is to replace the grill cloth with something appropriate for a gray finish and sell cheaply just to move them out of the house.
As for the Forte II that started the thread, I'm going to veneer those with figured walnut.
-
On 9/14/2018 at 11:26 AM, Anneliz702 said:
Did you complete your project? I am going to try this with some Forte II speakers and was wondering if you had any success. Thanks!
I have not. Below, Moray James posted about the vinegar and steel wool method. That is what I tried testing a month or so ago. I bought a thin piece of oak at Home Depot, sectioned it off, and tried various methods using the solution to try from barn wood grey all the way to black. I bought some wine tannins to create a solution to brush on the wood to make the reaction produce a darker stain. I'll take a photo of my test plank.
Then I took a pair of old, oiled oak KG4 risers and attempted to duplicate the results. It didn't work. What I haven't taken the time to do, and this is my next step, is to really sand down the oak veneer before applying the solution. Obviously, I'll be careful not to go through the veneer.
-
My understanding is that the Theater bar is NOT a sound bar. It is a left/center/right set of speakers in a single housing. As such, by itself it is a 3.0 setup. With your AVR you can connect the Theater bar and your KG 1s for 5.0, add a subwoofer for 5.1.
-
Where are you located?
-
I bought a walnut 450ca to go along with a pair of walnut Quartets and I am dissappointed that the veneers are not even close. The 450ca is a very dark brown. Is this real walnut veneer or a different wood that has been stained walnut? I read elsewhere that the wood may be hickory. Is there a definite answer?
-
I did not realize that modern walnut veneer Klipsch was not walnut. This explains why my new 450ca center in walnut looks nothing like my quartets l/r. Which I am bothered by and would not have paid the extra money for the ca version if I had known.
Your post tells me that there is no use trying to rework the finish on the 450ca because it's foundation is hickory.
-
Two days after posting this a pair of walnut Quartets went up for sale in Maine. I picked them up last Sunday. I'd say the cabinets are a 8/10, just one small chip on the speaker and a larger chip from the stand. The cabs needed some cleaning and in desperate need of oiling. I'll post pictures once the cleanup job is done. I paid $450.
84 cornwall decorators in Ma. $750 - they need work
in Alerts!
Posted
I'm the seller. These are not decorators. They are standard Cornwall I. I just don't have the grills on in the pics.