Jump to content

larryderouin

Members
  • Posts

    5
  • Joined

  • Last visited

larryderouin's Achievements

Newbie

Newbie (1/9)

1

Reputation

  1. When I refinish, I'll buff up the corner protectors, or just find new brass colored ones and clear lacquer them.
  2. The crites kit arrived Friday and I spent about 45 minutes on it. The differences are night and day. Before I had the tone controls on my FISHER X-101-B set as follows: Volume at about 9 oclock Loudness on Bass 2 past 2center Treble 3 past center. NOW Volume @ 9 oclock Loudness OFF Bass -1 from Center Treble Centered. They sound more balanced now, even tho the bass is a bit less than I'm used to it's actually more pleasing. Mid's are actually robust now, with highs showing some shrillness, that can be tamed with the Treble control. OVERALL, Sinatra and Basie never sounded better!!! Re-Finish after May or June.
  3. HDBRbuiler. No labels anywhere. HBR? HBB? All these acronyms I don't know. Would someone please educate me with a list please? JohnA Yes the K55V's have soldered terminals. Crites cap kit enroute. jimjimbo; The corner protectors are there. If you look at the pic with out the grille, you should be able to see the right rear corner is raised a little. That's the metal corner protector. The fronts are hard to see. Also in the pic of the paint chip, in the lower left corner the edge of a protector is just visible. Thanks Larry
  4. PART 2 I'm not happy with the cheesy Wire terminals so I'm gonna put in a binding post box on each. The paint is chipping off in places on both so I'm tempted to strip off the paint, sand, stain, and poly coat Semi Gloss in Walnut. I think that would go nice with the black grill cloth. I'd love to get some of that salt and pepper grille cloth for the Capitol Edition but I seriously doubt klipsch is letting that stuff go without a speaker attached to it.
  5. I just got these Heresy's. I believe they are Heresy I's from the type "E" crossover. I sent all the info on them to Klipsch and they are thinking they are pro's, probably based on the black finish (which is chipping in places) and the corner re-inforcements on the top corners. They do have the tilted risers. There are NO IDENTIFIERS on or inside the cases except a stamped number across the top of the back. These are sequential (127W030 and 127W031). As I said before the Crossovers are Type "E". Woofers are K22R Squakers are K55Y Tweeters are the Rectangular K77M I'm thinking I have either late 81 Heresy I or very Early Heresy II's. But i would like some verification of this from the GURU's here.
×
×
  • Create New...