Jump to content
The Klipsch Audio Community

SpeedLimit

Regulars
  • Content Count

    89
  • Joined

  • Last visited

Everything posted by SpeedLimit

  1. Les versions en bois, je les ai fabriqué moi-même .. Ils sont moins jolis que les vrais .. mais effectivement, peut-être qu'ils sonneront bien. J'ai commencé à rénover les coffrets peavey, retiré la peinture sono (avec des incrustations dedans) et je vais les repeindre en noir mat. J'essaierai les clone scala avec les haut-parleurs que j'ai commandé d'abord avec le filtre AL-3 puis si ça ne convient pas, je ferai des tests avec le Dayton Audio DSP-408. Je crois que Klipsch fait des filtrages en linkwitz riley .. Je ne sais pas ce qui est mieux, Bessel, LR, Butterworth et quel pente ( 6 - 12 - 18 ou 24 dB/oct) J'ai encore le temps d'y réfléchir et de me documenter avant que mes haut-parleurs arrivent.
  2. Vous parlez français ? En fait, je viens de commander les 2, les DE10 et les DE120 en 8 ohms ainsi qu'une paire de diaphragme de10 en 16 ohms au cas où j'en ai un autre usage. Je testerai les 2 tweeters. C'est vrai que le DE10 sont beaucoup moins chers .. Merci en tout cas pour tous les renseignements. Je m'étais trompé pour les boomers, j'avais acheté les Kappa 15A en 8 ohms, je ferai un autre usage de ces haut-parleurs. Il me reste à trouver une paire de K-401, car j'en ai fabriqué en bois mais je préférerais avoir les originaux qui seront bien mieux que mes copies en bois. Merci encore RandyH000 et bon dimanche, le mien se termine bientôt ..
  3. ordered instantly, all I have to do is wait for the package to reach me
  4. great, thanks for helping me choose the right model, I will order a pair of DE120 in 8 ohm (B&C DE120).
  5. Thank you RandyH000 So for my Clone Scala with the AL-3 crossover, if i resume, i need Eminence Kappa 15C woofers (4 ohms), Atlas sound pd-5vh squawkers (16 ohms) and B&C DE120 (8 ohms), is that right ?
  6. Hello, did you take b&c DE120 in 8 ohms or 16 ohms ?
  7. RandyH000, do you think my tweeters should be in 8 Ohms ? Now i have 2 AL-3 original crossovers, 2 Kappa 15C Eminence woofers (4 ohms), 2 atlas sound pd-5vh squawkers (16 ohms), 2 B&C De250 16 ohms tweeters but i have seen that B&C De120 tweeters should be better for my "La Scala" clones ( with Peavey FH-1 box). Do you think DE120 are better than DE250 ? And should they be in 8 or 16 ohms with these crossovers ? Will i have to change something on the AL-3 crossover to make them have a good sound ? Sorry for my poor american spoken, i hope you understand what i mean.
  8. What do you mean ? All the speakers are New, 16 ohms for tweeters ans squawkers, the Kappa 15c are 4 ohms. Just the al-3 is a stock one, that mean already used. I bought them second hand.
  9. Last saturday i bought a pair of peavey FH-1 cabinet. I will put a Eminence kappa 15c inside. I also build 2 k-401 clone Horns in mdf with atlas sound pd-5vh squawker, and i have 2 b&c de250 tweeters that i probably will change with de120 ones. What is the best crossover for these speakers ? I forgot to say i also have a al-3 crossover. Linkwitz Riley, Bessel, Butterworth ? Which slope, 12, 18, 24 dB/oct? What about frequencies? I think 450hz ans 4000hz would be good? Let tell me what would the best crossover for this set if speakers. I also have a Dayton audio dsp-408 to test several cross. Best regards from the other side of the world.
  10. Surely not enough, perhaps a little more than 100 hours.. I sent 30 Hz for 2 or 3 hours to soften the suspension of the woofers
  11. Hello, i'm back again ... the wood "k-401" horns are finished .. not very well done but i will try them with atlas pd-5vh drivers as soon as possible have a nice sunday to all i didn't find 1"3/8 gasket so i made them with foam
  12. Yes i would have prefered exotic woods but on my little island, wood is very expensive. This is why i did make them with MDF. and i was no sure to be able to make them 😀
  13. i have read that, i have never eard la Scala speakers, so i do not know if what i have read on forums is real or not. oh, oh ... those are my first horns .. and perhaps the last ones. I have no place to work finely. I make that outside my house, near my garage. I have to carry my tools from up to down my flat .. really not easy and simple. i will do the throats and listen if the horns sounds good with the atlas sound drivers .. if not, i will wait until i find a pair of k-401, or k-400 or speakerlab h350 horns.
  14. Thank you RandyH000, my girl friend just painted them .. just the outside. but i am not so proud about my horns. They are not specially well done. i hope it will make the work. Now i have to build the throats
  15. if i build the La Scala, perhaps i will buy a pair of Eminence 15C and the B&C DE120or DE10, if i remermber, i have read that they are better working in a clone of the La Scala. but i have also read that the la Scala have a really sound of horn in the basses, something like "nasal" sound ..
  16. No, mustang_flht, it is for another pair of speakers .. i wanted to try the La Scala. I have already the AL-3 crossovers, i have the pd-5vh atlas sound driver, a pair of b&c de250, a pair of Eminence 15" woofer (kappa 15A), i know it's not the best replacement speakers but perhaps i will try with activ crossover. I would have like to find a pair of k-401 horns but i only see ones in the USA and to ship them to Reunion Island, it is over than 3 times the cost of the parts. in the same time ... i have advanced on my horns
  17. The horns are dry, well rather the glue. I removed the clamps. It remains to cut the sides of the horns in excess and to sand. Afterwards, it will be necessary to make the part to connect the driver to the horn.
  18. it easier to bend 3mm MDF i let the glue be dry and will see what it get
  19. very hard to bend 6 mm MDF and then maintain in place .. I think i will try with 3 mm MDF for the first layer
×
×
  • Create New...