Jump to content

NeedDecentSetup

New Members
  • Posts

    4
  • Joined

  • Last visited

Posts posted by NeedDecentSetup

  1. On 3/14/2021 at 8:34 PM, Sancho Panza said:

    Good, very good. Add another SW when you can, then a two channel amp, & another pair of RP-500SA

     Thanks, I plan on adding another SW in future, but why 2-channel amp with RP-500-SA? Is this for rear elevation? If so, will there be a noticeable improvement given the costs? 

    • Like 1
  2. I have decided to go with the setup below. Any thoughts?

     

    left/right front channels - RP-600C
    Center Channel - RP-504C Center Channel
    Side Surround - RP-500SA 
    Rear Surround - R-41SA
    Front Elevation - RP-500SA
    Subwoofer - SVS SB-3000 Subwoofer
    Amp: Denon AVR-X4700H
     

    • Like 1
  3. Thanks for the quick responses, and tips on where to purchase! 

     

    Quote

    Me thinks - the 504C maybe a tad much for the 600Ms. Any chance you can go with floor standers in place of the 600Ms?

     

    Unfortunately, I prefer not to use floor speakers. Mostly, it's a  cosmetic issue, and the concern of them getting bumped and banged by. kids. However, I feel the 600Ms may be too small even for fronts.

     

    Quote

    Are you saying 4ft from the screen to the seats? How large is the screen? Sounds awful close.

     Agreed. The space is 4ft from the screen to the seats, and the screen is 120 inches. I tend to seat in the last row further back, and even when guests are over the 1st row is always the last option.

     

    • Like 1
  4. Hello All,

     

    I need to replace an old speaker system (12yrs+) in a dedicated home theater. I am considering purchasing the speakers below, but I am on a budget and want to make sure I get it right. 

     

    left/right front channels - RP-600M Bookshelf Speakers

    Center Channel - RP-504C Center Channel

    Side Surround - RP-500SA 

    Rear Surround - RP-500SA or R-41SA

    Front Elevation - RP-500SA

    Subwoofer - SPL-150 Subwoofer

    Amp: Denon AVR-X4700H

     

    Here are my questions:

    1. I like the RP-504C for the center channel, but feel it may over power the RP-600M. Is that a correct assumption or will they be okay?

    2. Due to stadium seating, I need to mount the RP-504C center channel above the screen. This speaker is heavy! Can anyone recommend a get mounting bracket?

    3. This will be my first Dolby Atmos setup. There is a space of about 4 feet between the screen wall with the l/c/r spears and the first row of chairs. Should I place the front elevation speakers above the l/r channels or move them closer to the MLP?

    4. The rear surround speakers are on a back wall and just above the head of the listeners. Should I go with the R-41SAs or stay consistent with the RP-500SAs?

     

    • Like 2
×
×
  • Create New...