norbert2000

Thank you Schu, I will look into that. I will add the new side enclosures, this is why I need some help. I do not want some "secret" information, just simple dimensions, measurements, from exterior. Worst case I have to find a store and go there, but is difficult to find one in my area.

Hello everyone After one year of "holiday" I re-started the work to the Klipschorn project. I made some CAD drawings in the past, but I want to update them to the AK6 looks. If someone can help me with some generic dimensions, etc. for the AK6 I will be very grateful. please contact me to discuss more easily the details. Regards

Maybe someone else know someone who has the new AK6..... Please leave me a private message .

Thank you soundbound. One of the biggest challenge is done, I had to buy all the parts from US and Canada...... The second challenge is now to find someone who has a pair of K-horns AK6, because I want to compare the old version with the new AK6. Do you know someone who has the new AK6? Regards Norbert

Finally, most of the parts are here I'm missing the capacitors and some "minor" parts. It was a long "trip" from US and Canada to EU.

Guys, I'm now more confuse that before I spent three months searching for the material / parts, I'm thinking now to start over (to spare a few years, as the nice golden retriever said) . Is that much the difference between K-horns and Jubilee? I looked on youtube to find a comparison, but nothing.

Hi, you manage to find the ES5800 x-overs?

Hi Tom, thank you for the details. This is also my problem. I analyzed a lot between this two options and I went for the more safe option. In time I will search for a bargain K-402s and then I will build a Jubilee also My "man cave" is in the attic and due to the roof conformation I'm limited to 1.3 -1.4 meters (4. 5 feet). So now I'm focusing on the Klipschorns. It will be a DYI project, due to ridiculously high prices that we have here I found already most of the parts I need. I will go with originals K-33, K-55-v and K-77 just to try to be as close as possible to the originals. What I will change are the x-overs, I will use ES400 + ES5800.

Thank you James, I also found this file, but I need the specs to make the ZMA and FRD files. Size – inch RE - Ohm FS - Hz QM - QE - QT - RMS - Ns/m or kg/s MMS - Gramms CMS – mm/N VAS - Liters SD - Square cm BL - TM Pmax (Wattage) - W rms XMAX - mm LE - mH EBP - EFF - % SPL - dB

I was also leaning towards Jubilees, but they are too big for my room. May be in the future, if my wife doesn't kill me first. In Europe the houses are not so generous like Australia or US

I will move to the DYI section and start to build a pair, otherwise I will never have a pair

good one

Hi, do you still have these K-horns?

I'm searching now for almost two weeks and I couldn't find the specs for K-55-V and K-77(t35). I found only these for K-33.

Hi Marvel, I know that this is am old topic, but I have to try; The K-33 woofer specs were perfect, but I also need the values/specs of the k-55-V and K-77(T-35) used in the Klipschhorns, if you have them? Thank you