manufanatic

Im still here was out due to my mother having a stroke the rc 3II is still available if you are interested. i figure 150 plus shipping OBO.

more photos They have some dust on them but are in perfect shape

Attached photos

Hey everyone, I need to sell my Klipsch Center (RC3II) and my SS1 surrounds. Both are in good shape and I will email pics if requested. I will sell to the highest reasonable offer. Yes i will seperately.

thanks for the advice pics posted

in case any are interested im putting up my RP-5s, RC3II and SS-1s up on ebay here is the link obviously if your interested we can talk price here as well http://cgi.ebay.com/Klipsch-RP-5-RC3II-SS-1s_W0QQitemZ5824329567QQcategoryZ32861QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Looking for a pair of RP-3s in good working condition. Willing to trade some SS-1 surrounds and cash or just cash PM me if you are interested thanks

Please PM me if your interested. Im near Orlando Florida. These speakers are in mint condition with one exception. One of the speaker covers has a broken peg but it still attaches to the speaker with no problems i also will consider parting with my RC III 2 and my SS1s thanks

bump last call I will be packing these up going to florida if no takers.

I am moving to florida and downsizing my speakers. All speakers are in pristine condition and the RP-5 grills are in perfect shape. All have been bought from authorized dealers. I am willing to Deliver them within a 100 miles of my address for a modest gas fee. Shipping is doable but the RP-5s will be excessive I live about 50 miles north of Santa Barbara Yes for the right price I will split the set up. Any takers

I know moon. I luv the amp but I cant fully utilize it. Its been an enjoyable 15 months with it though.

Hello all, Im moving to florida into a smaller home and I dont think I will need all of the power my 7200 possesses. I am looking to sell it for a fair price. Its bought from a factory authorized place so no worries there. It contains everything and is in excellent condition. Please keep in mind if I have to ship it the cost will be high It weighs 70lbs. Any offers before I do the ebay thing.

I just got klipsch to send me two new grills for my RP-5s which i purchased from Onecall. I contacted Onecall and they verified i purchased it from them and made the call to klipsch. The grills are on the way. No receipt needed. Although this is a cheap repair i still would contact tweeter again and talk to someone else. If not send an email to thier corporate headquarters.

I have these speakers now for almost 4 years. PM me with any questions. I currently run these without hooking the lfe to the reciever. Just run speaker wires from the low or high (long as its the same on both speakers) to my amp and set it to large. I have used them with the following Yamaha dspa1 Pioneer Elite 47TX Harman Kardon 7200 Panasonic saxr-50 (current) I love these speakers once you get them dialed in but they are huge so I am looking to maybe sell them. Any interested let me know.

I would HIGHLY recommend getting the projector first and using it for a month or two before you decide on screen size and type. That is the best advice you can get. Get your projector play around with it vary your throw lengths and mounting positions when you are satisfied with that then decide on what screen you want. You may find that the wall is good enough for you.

I had an older generation Yamaha DSPA 3090 which i loved but i upgraded about 6 months ago to the 7200 and its like night and day. So much more bottom end and enveloping sound. The auto surround setup on the yamaha is an enticing feature but There is no way i would buy the 1400 over the 7200 to get better sound then the 786 that one call sells the 7200 for you have to pay twice as much or more. IMO the 7200 stacks up with the Pioneer elite 49tx/txi and the Denon 5803 which cost 3-5 times as much Hope this helps

---------------- On 10/21/2003 4:40:04 AM marksdad wrote: you bottomed out the sub? explain ---------------- in certain passages it sounded like my sub was ripping apart. I talked to Patrick at one call and he said that in the menu you can turn down the LFE so maybe thats my best bet. For Moon: I turned the subs down. To be clear I have powered towers with built in subs basically its the ref bookshelf from a few years ago with the ksw 12 sub housed beneath it. I do love the HK so much warmer sounding then the 47tx I had. Music sound so much better doesnt hurt me after listning for more then 20 minutes.

Hello, I finally gave into the HK experience and purchased the AVR 7200. I have the RP-5s for my fronts. They are powered towers. While listening to Matrix reloaded I bottom out the subs a few times. I need advice on how I should set these up with the HK. Moon anyone help me out

you can PM me if you wish I have had mine for 2 years no problems..

Hello all I have a problem. It seems every time i change the channel on my DTC 100 (HDTV REC) My Pioneer elite 47TX pauses if i am using another audio source to listen to. For instance i like to watch a sporting event without the sound from the tv and listen to cds at the same time. If i change the channel my cd player pauses until the new channel is visible on my screen. This also happens to my dvd player as well. I can actually see on my reciever that it pauses. Is this a shielding issue between the DTC 100 and my receiver. Currently I have a BDI rack with the RCA directv reciever on top directly underneath it is my Reciever. THere is a glass shelf in between but it appears that the Direct TV receiver is somehow dorking up my Pioneer ELite. I see my options as follows Put the Directv receiver some where else in the room and see if the problems happens again IS that all i can do? this didnt happen with my old Yamaha. Help me please!!

Hello, I have posted this question on the AVS forum but no one will answer so I thought maybe the Klipsch forum could come to my rescue. My problem is this I have a Pioneer elite Cd Changer (pd-f27) for some reason every time i change the channel on my Tv (pioneer 53 hdtv) through the Sat receiver (DTC 100) my cd changer pauses. IT seems that something is happening to the laser reading the CD during these channel changes. It happens every time. I think it must be a shielding issue can anyone give me advice on fixing this. thanks Gene

OK after extensive testing of this unit all I can say now is WOW!! the Auto cal really dialed my speakers in and with the DTS soundtrack on U571 i almost dropped a load in my shorts. The soundstage was incredible. For years i had lusted after the Definitive Tech Bp 3000 speakers with the massive 18inch powered subs but after listining to this Elite receiver with my RP-5s I was totally blown away. My Yamaha DSP A3090 was a great Hometheater amp but always seemed to lack that gut wrenching low bass i was Looking for. Well I found it. Crystal clear highs And gut wrenching lows. Serouisly must have been in the 20hz range (high) Im not quite sure what the RPs are rated at but I used its full capacity. I was at -12 on the Volume and my 20X12 listining room was immersed underwater with Matthew and Harvey aboard U571. Just amazing detail and power. My brother in law just got the 45tx with Klipsch ref Bookshelfs and a SVS sub. I will be hooking that up soon and will compare but right now i am in Home theater heaven!

Just hooked up the Elite and its pretty cool. Not quite sure it was worth the 1300 upgrade yet. The Pro logic 2 is a brilliant feature and the MCAAC is awesome. The only negative is thier were some scratches on the unit (refurb) but you cant see them in the rack. I chose the Pioneer because of the additional rear optical inputs the additional component input the AC3-rf input more power bigger footprint and for me personally i didnt like the look of the HKs. They look plastic and they are made in CHINA. My 50 dollar dvd players are made thier and i have received 2 of those DOA and had to return them. The Elites are made in Japan. Just my 2 cents But for 1188 delivered the 7200 is an awesome deal..

Hello all after himin and hawin for about 8 months i pulled the trigger and bought the Elite 47TX. 1300 with a 2 year warranty. I was thinking about the HK 7200 but it just didnt have the inputs i wanted. It will be here in about 18 hours. Now i have to tell the wife. BTW Anyone need a slightly used Yamaha DSPA 3090 PM me