Search the Community
Showing results for tags 'Making the Heresy-3 better'.
-
I spent the better part of two weeks taking this impossible double boarded Xover ,extending it and filing it with premium parts. was it worth it .it destroyes any crites Xover and far better parts then APL . as long as you are using a powered sub . I crossover around 80hz with Rythmic servo subs . The detail and articulation now beat the snot out of many Speakers in many areas . Bass is solid down to mid 40s in room. One key is what many pros studios are now using Iso Acoustic stands -platforms .get rid of the risers put these underneath and full tiltback the Iso R430 i have under speakers and subs 9 capacitors and 4 resistors all resistors are Mills 12 w ,1%, and a 50watt 1%. on tweeter a .47 Clarity ESA capwith Mundorf Silver oil .33 in parrallel, next in order a Mundorf Supreme 1.5, then another 1.5 Supreme to the upper mids handed over to the Mid a 3.0 clarity MR capacitor All metal foils. then a 1% tolerance Dayton 5 uff MPK then on other end a 4uf Dayton , to a 16uf Clarity ESA for Bass then 2-15uf -Aeon and a 16uf . I had to add a 1 inch spacer between board decks , and a 3.5 inch screw and lightly drill out the posts then i added AVM vibration treatment to all exposed resistor leggs and solder joints and drivers ,magnets. I have several caps under the top board and 1 under the bottom board . I could not possibly fit more if I tried . All Klipsch Heritage caps are MYLAR 5% 250v . On Munforfs 1,000v ,and Clarity MR 400v was the smallest offered all others are 250v I did not get to take the final pictures forgot but you can see most of build what a ***** ,I also added my own accusastuff ,parts express and black hole cabinet treatment much much better without having to totally reinforce the cabinet only $650 after discounts . it sounds Great. 100 hours will get better to 200 in my experience .