Search the Community
Showing results for tags 'pro-180rpc'.
Hello, I'm planning for building a system for both home theater and music. To have better sound for music without influencing the home decor too much, here is my current plan for a 5.1.2 system: Left and Right: Klipsch Forte IV Center: PRO-180RPC LCR Rears: Not selected yet Atmos: Not selected yet Subwoofer: Not selected yet AVR: Marantz SR7015 And here are the questions I want to get your opinions: 1. I know PRO-180RPC LCR should be paired together as LCR, just wondering if anyone knows would it perform well with Forte IV? Since the L&R would be floor standing, would PRO-180RPC LCR sounds weird since it's in the ceiling? 2. For the rear speakers, I used to think about Pro-180RPC LCR as well. But I'm not sure if 45 degrees would be too much for my space? Would Klipsch CDT-5800-C or regular PRO-180RPC perform better? 3. For the Atmos, it's kind of similar, the 45 degrees may be too much for the atmos speakers, would Klipsch CDT-5800-C or regular PRO-180RPC perform better? 4. As for the sub, I'm thinking about GoldenEar SuperSub X, but if the in-wall or in-ceiling speaker like PRO-1000SW or PRO-800SW could perform similarly, I may prefer the in-wall or in-ceiling solution. Any suggestions? 5. For the AVR, I think all the speakers I'm looking at have high sensitivity, I think SR 7015 would definitely be enough for HT. But for the music, would it be worth having an amp for the Forte IV to get better sound? or just upgrade the AVR to Denon 6700h? I really appreciate your help in advance! I also attached my floor plan with the location of speakers I'm thinking now. EDIT Thanks for all the feedback! I would forget the in-ceiling center and rears. I would appreciate it if anyone can give me suggestions on: 1. Any recommendations on the center and rear speakers which would well pair with the Fortes? 2. If this is the case, would it be worth it for me to upgrade to a 5.1.4 system? 3. For the sub, would the in-ceiling or in-wall sub perform well?
I am Chris and need help deciding what to put in the back ceiling surrounds. I was thinking CDT-5800-CII or the PRO-180RPC. Another issue I have is the sound clarity seems off compared to my 1990's Reference 3 Series configuration. I am not sure what I am doing wrong but things just don't seem as clean. I used the marantz audyssey to set up the speakers. Any help would be great. My room dimensions are 18 Feel Long and 15 feet wide. Mains : Rp-8000 walnut Sides: R-502 Center: RP-504C Sub: SVS-SB-3000 Receiver: Marantz SR6013-9.2
Took over 5 years of collection, finally completed my 9.2.4 Home Theatre with Klipsch speakers (minus the subs). : ) I had some RF62 and RC62s initially and @Youthman inspired me to do v2 w/ La Scala. I was fortunate to find a couple La Scala from an original owner to kick start it and rest fell in place after. I originally had Yamaha surrounds and ceilings and those were the last ones to be replaced. I thought ceiling won't matter much.. oh boy, was I wrong. Love those 8" pro-180 RPCs, appreciate the bass from those ATMOS heights for sure! Lastly, I think for my size of room where surrounds are relatively close to seating, the RP surrounds with the dispersion sounded better compared to my original in-walls. I may look to have a couple more acoustic panels to cut down reflections more in time. What's next? Gonna enjoy the newly released 25th anniversary Gladiator and Braveheart to test it out. : ) Receiver: Denon AVR-X8500H LCR: Klipsch La Scala w/ Crites CT120 and A/4500 crossover Front Wides: Klipsch RP-600m Surrounds (L, R, RL, RR): Klipsch RP-502s Top (FL, FR, RL, RR): Klipsch Pro-180 RPC Subwoofers: SVS PB-16 & PSA v1501df Projector: BenQ: HT3550 Screen: Elite 1080P3 120" 16:9 Cheers and hope everyone is staying safe and enjoying their HT!
I’m in the process of building a speaker (and lighting) cloud that will enable me to add in-ceiling speakers for Dolby Atmos, and I was hoping I could tap into the vast experience you guys have developed over the years building and tweaking your home theatres with Klipsch speakers. This is going to get a bit complicated and I apologize in advance, but I will do my best to provide you with as much context and information as possible so that you can advise me on the best route forward. Now the reason I need such a complicated solution is because I have a cement slab for a ceiling, so I can’t mount in-ceiling speakers in the ceiling directly. I’ve also used this as an opportunity to build an interesting drop ceiling effect with secluded LED light strips around the perimeter ceiling and my cloud in the middle – just in case you’re wondering why the madness… 😊 Here's what it will look like from ground looking up. The grey parts are the drop ceiling and cloud which drops 20cm from the cement slab (these will have secluded LED strip lights around them), the white part is the slab and the round white dots are LED downlights. The cloud will be built using 15mm thick Baltic Birch Ply (unless you have any better recommendations). I considered MDF but it’s too heavy. Apologies for the metric dimensions, but I’m hopeless at the Imperial system… [all dimensions in diagrams are in centimeters] I’ve purchased the PRO-180RPC In-Ceiling Speakers, and I have been in contact with Klipsch support seeking advice on what would be best for these specific speakers. However I wasn’t really able to get a definitive answer from them for my unique situation. This is the gist of what they say: “Our in-ceiling and in-wall speakers are designed to work with an infinite baffle so a speaker cloud with no backing to close it would work well in this case.” “The box size with not have any affect on the sound of the speaker. So build what ever size works for your building needs.” The reason why I do need some kind of partition for the speakers is because the middle part of the cloud will have slots cut into it and filled with Rockwool to act as acoustic dampening similar to this: https://www.genesisacoustics.co.za/productdetails.php?id=100101 to help deal with reflections from the ceiling. Since rockwool is fibrous and messy, I want to keep it away from my speakers. Having built speakers and subwoofers in the past, my first instinct is to build individual sealed boxes within the cloud for each speaker according to “perfectly calculated” volumes, however this doesn’t seem to apply to these speakers according to Klipsch. The other concern I have and reason for a closed system is to try and reduce sound from the speakers hitting the cement slab and transferring through to the neighbours upstairs (or at least any more than it does already). So here are the three options I’m trying to decide between, from easiest to most complicated to implement, along with any concerns I have with each: Option 1: Simple Partition As seen in the image above, I simply add a divider between the cement slab and cloud base (baffle) that stretches from one side to the other of the cloud. This is the simplest to construct and will save some weight. Concerns and potential issues: An LED downlight on either side of each speaker section will be included in the box. Not sure if this will have an adverse effect on the sound. There is nothing between the back of the open speaker and the cement slab above it, so I’m worried about more sound transferring to the apartment upstairs. I’m also wondering if cement slab essentially forming the back side of the speaker box will have a negative effect on the sound quality. Option 2: Sealed Partition that excludes the downlights This is exactly the same as the one above, except I’ve now added side panels to seal the speakers off from the downlights. Again, the cement slab will form the back side of the “speaker box”. Same concerns and potential issues regarding the cement slab. Option 3: Fully Sealed Speaker boxes This was my original and more ambitious plan. Here I’ve lowered the partition walls to 14cm and added a wooden back panel to seal the box off. There will be a 3cm gap between the 15mm ply board and the cement slab, which I will fill with 3cm thick rockwool in case it helps absorb the sound travelling through to the slab. Advantages (at least in my simple mind): Speaker has it’s own sealed box (Klipsch says this isn’t necessary, but I still can’t wrap my head around it, so maybe you guys can cure my stubbornness if I’m being ridiculous). Sound travelling through to the slab above could be reduced somewhat. Even Klipsch claim that their ME-800-C metal enclosure reduces sound transmission by at least 10db. The 3cm air gap and insulation could also help reduce sound transfer to slab. Disadvantages More time consuming to build More wood required, added expense and added weight. The weight is the greatest concern here. Taking all the above into consideration, which option would you guys recommend. If I can avoid option 3 with little to no adverse effects, then that would be preferable, but I’ve spent a lot on these speakers and the construction so far, so I want to do what is going to sound the best at the end of the day. I’m sure you guys know what I mean… 😉 Thank you for your patience and taking the time to read this, and I appreciate any input and advice you guys have to offer. Thank you Brendon