Search the Community
Showing results for tags 'cabinet repair'.
Found 2 results
Hello all, I have a KG 4.2 that has vibration coming from the back of the cabinet with any amount of bass. If I hold my hand there and push in slightly, it stops. Suggestions for how fix this permanently?
Hello All, I just wanted to share my experience on dealing with cabinet separation on a pair of Heresy IIs that I had purchased. After purchasing the speakers and getting them home, I had realized that one of the speakers had seam separation on the top right and lower left sections of the cabinet which I believe was caused by being droped during shipping. Since this was resulting in an unsealed cabinet and the possible loss of some of the low end of the speaker, I decided to see what I could do to correct this and possibly make them more sturdy in the process. My first step was to remove the woofer of the speaker and see how these things were built. As you can see by the photo below, these speakers are held together by a small rectangular wooden brace and "squirted" with a fair amount of wood glue to keep the corners together. This piece is what had become slightly detached from the cabinet wall and my focus turned to how best to approach this. After careful consideration, I elected to replace a few of the wood braces with new pieces and use a combination of careful use of screws and strong wood glue to support the cabinet. My hope is that the addition of the screws would be better able to support the cabinet and better hold the integrity of the seal together over time. This was done to the other speaker in order to match any slight variation on acoustics that this could have caused on the one, although I could not tell A/B after doing just the one.