Search the Community
Showing results for tags 'line'.
Found 2 results
I use my new 5s almost exclusively with a turntable. I do not use a separate preamp. My TT doesn’t have a built in preamp. So I have to use the preamp built in to the 5s. When connecting the TT initially, I noticed that with everything hooked up, with the phono/line switch on “line,” I had no sound. So I switched it to “phono” and had what I assumed was full powered sound. I assumed I set it up correctly. I then had occasion to look at the Klipsch website on how to connect a TT with and without a preamp. Despite what works with my setup, the instructions clearly state that to use the speakers’ internal preamp, the switch should be on “line.” And to use another preamp, either stand alone or one built in to the TT, the switch should be on phono. This is the opposite of what works with my speakers. I have no other preamp, and the switch is on “phono,” but I have sound. I tested it and switched it back to “line” and get no sound. This may sound nitpicky and silly because after all, they seem to work very well. I guess I’m concerned either that I have done something wrong in connecting the components or there is something wrong with my new speakers. Could it simply be that the Klipsch website is wrong and that the proper setting is “phono” for 5s’ built in preamp and “line” for an external preamp? I contacted Klipsch, to no avail. I hope this makes sense. Thanks
so came across this. A 60hz harmonic line filter. what does it do? filters ac ? how? only allows 60hz to pass thru the filter. basically a giant low frequency sub sub woofer filter in design. does it work? seems to. trannies don't buzz anymore and motorized devices don't squeal at high rpms , so yes it works. this one is a 14 amp times 3 440V capable one...it can do three phase. but easy to adapt to single phase 120 or two 120 phases off of 220/240. main thing to remember is to wire as a sub panel....you will need to add a ground bar and a floating neutral bar. and put it in a box so your cat doesn't get electrocuted. duh...welcome to the new forum...pic wont up load..