Search the Community
Showing results for tags 'power supply'.
Found 3 results
I have an RW-10d and the LCD display doesn't come on and if I hook up audio input I hear nothing. The fuse is fine. I took the back plate off and I have 120V AC on the power supply board; However, the CD+ to CD- voltage reads as 0V DC. I presume this means that the power supply is bad. I'd just prefer to replace the entire board if possible. I contacted support and they told me "Unfortunately we no longer have the amplifier for that speaker available. You may need to locate a replacement using a secondary market". Any ideas where I can get replacement parts or what I should try?
Sorry for this being my first post and if this has come up a lot, I couldn't find much info online. I bought my pro media 2.1 speakers in the early 2000's and recently it stopped working. I took the back off and took a look around the board after it stopped working. The speakers would turn on for a second, then turn off. I would hear a click after the speakers would turn off. I traced the problem to the position C118 transistor. At least I think it's a transistor. Anyhow it's blown and blackened. I found one post online saying it may just be a noise filter or something and it could be safe to just remove it and not use it, but I don't want to do so, and further damage the circuit board. If anyone could help me out, i would bee forever grateful. Also, sorry if this post is a wall of text as i am posting this from my phone. Edit: if this post is in the wrong forum, mods please feel free to move this.