Speedball Posted March 3, 2009 Author Share Posted March 3, 2009 4 & last one. Quote Link to comment Share on other sites More sharing options...
DrWho Posted March 3, 2009 Share Posted March 3, 2009 Ah, I recognize that amplifier....In fact, I'm reworking one right now. Why are you swapping the fan out? Did the old one break? The stock fan is uber quiet at idle... Does it run warm at idle? Quote Link to comment Share on other sites More sharing options...
Speedball Posted March 3, 2009 Author Share Posted March 3, 2009 The original was not working at all and the wire wrapped around the coil? was expanding so much the fan blades were rubbing on it. The first replacement fan was too loud and the second to be installed from Mouser is very quiet. The online info about the original fan was supposedly a 2 speed. I took a voltage reading of 117v so I bought a single speed for that v reading. Time will tell if it works ok under load. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted March 4, 2009 Share Posted March 4, 2009 Ah, I recognize that amplifier....In fact, I'm reworking one right now. Which way does the fan blow on that one? Quote Link to comment Share on other sites More sharing options...
DrWho Posted March 5, 2009 Share Posted March 5, 2009 Back to Front...same as all QSC amps I've run across. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.