Tom Adams Posted August 23, 2010 Share Posted August 23, 2010 A new technique that listens for cracks in ageing aircraft Aug 5th 2010 (from The Economist) WHEN they were built, no one thought they would fly for so long. But fitted with new engines and avionics, aircraft can be kept going for a very long time. The average age of the world’s airliners is more than ten years, with some passenger jets 25 years old or more. Military planes are more geriatric: the Sikorsky Black Hawk helicopter entered service 31 years ago and the Lockheed C-5 Galaxy 40 years back. Both are still going strong. Some Boeing KC-135 aerial-refuelling planes, which are based on the venerable 707, have been flying for over 50 years. Engineers reckon they could still be in the air when they are 80. One thing that does ground old aircraft is the impending failure of their aluminium structure from metal fatigue. This begins in parts that are subjected to repeated strains, such as where the wings join the fuselage. Constant flexing of the structure concentrates stress, which leads to microscopic cracks. These cracks become more numerous and eventually large enough for the structure to fail. Aircraft engineers know a lot about how these cracks progress and keep an eye on them in routine overhauls. Nevertheless, they can be difficult and costly to find. Apart from careful visual inspection, techniques like X-rays and ultrasonic probes are also used. Now a British company has come up with a low-cost way of monitoring cracks in aircraft, even while they are airborne. The trick that Ultra Electronics uses is to listen for them with a system called Asis. It does this by fitting small piezoelectric acoustic sensors to parts of the structure to detect the particular frequency of noise caused by a crack in aircraft-grade aluminium. When first set up, Asis is calibrated to the acoustic signature of the aircraft. The system can point engineers to where cracks are occurring because the sensors also record the precise moment it is “heard”. As the sound ripples through the structure it arrives at different sensors at different times, which can be used to work out the location and severity of the crack. Once on the ground, a touch-screen device a bit like an iPad is plugged into the system and shows where any cracks are on a three-dimensional image of the aircraft. Asis will be tried out later this year by America’s Defence Advanced Research Projects Agency. A basic set-up to monitor the boom on a small helicopter (a particularly stress-prone part) starts at around $65,000, says Rob McDonald, Ultra Electronics' marketing director. As to the future, he expects the company will explore how Asis might also monitor carbon-composite materials, which are being used increasingly in new aircraft. Less is known about the long-term structural integrity of carbon fibre, but it is not prone to corrosion and is extremely tough, so with a bit of care and attention it might allow aircraft to fly even longer. Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted August 23, 2010 Moderators Share Posted August 23, 2010 Very cool, I would guess 65K is not alot in the aircraft business if it can keep a plain in the air for years longer. and safer. Quote Link to comment Share on other sites More sharing options...
Boxx Posted August 24, 2010 Share Posted August 24, 2010 Very interesting.... Thanks for posting.... Quote Link to comment Share on other sites More sharing options...
fini Posted August 27, 2010 Share Posted August 27, 2010 Now a British company has come up with a low-cost way of monitoring cracks in aircraft, even while they are airborne. The trick that Ultra Electronics uses is to listen for them with a system called Asis. It does this by fitting small piezoelectric acoustic sensors to parts of the structure to detect the particular frequency of noise caused by a crack in aircraft-grade aluminium. When first set up, Asis is calibrated to the acoustic signature of the aircraft. Left from the article is the news that Ultra Electronics is also using this technology to warn homeowners when a construction worker in their home might potentially exposes his (or her) "plumber's" crack. The trick will be installing the sensors discretely. The new system will of course be called Asses. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.