kg4guy Posted June 28, 2011 Share Posted June 28, 2011 I have a pair of each of these and what is the difference in the two? Quote Link to comment Share on other sites More sharing options...
djk Posted June 28, 2011 Share Posted June 28, 2011 K43 is for PA, K44 is the theater version for the Klipschorn. Quote Link to comment Share on other sites More sharing options...
Coytee Posted June 28, 2011 Share Posted June 28, 2011 Can you expand a bit more? I thought the K33 was the stock Khorn/LaScala/other driver for residential use, rated to 100 (or near it) watts max. The K43 was made for the SAME speakers (perhaps principly the LaScala?) for industrial use (theater?) and was rated at 200 watts. I'm not familar with the theater Khorn (the TSCM??), I would have thought they would have used the K43 in there. Evidently that's a wrong presumption? What is different about theater and PA use? Quote Link to comment Share on other sites More sharing options...
Guest " " Posted June 28, 2011 Share Posted June 28, 2011 The k-44 is used in the TSCM and the CP-1 (cornwall pro) Quote Link to comment Share on other sites More sharing options...
kg4guy Posted June 29, 2011 Author Share Posted June 29, 2011 Cool thanks the K-44's look like they have a little smaller magnet than the K-43's so will they take as much power or not? Quote Link to comment Share on other sites More sharing options...
djk Posted June 29, 2011 Share Posted June 29, 2011 I used a pair of Klipschorn bottoms with the K44 in a dance club with a 400W amp on them. Crossed at 100hz and driven hard into clipping on a regular basis for over 5 years without a problem. Quote Link to comment Share on other sites More sharing options...
kg4guy Posted September 30, 2011 Author Share Posted September 30, 2011 I got a pair of K-43-E's today and one reads 3.6 and the other 5.1 ?? Quote Link to comment Share on other sites More sharing options...
Quiet_Hollow Posted October 1, 2011 Share Posted October 1, 2011 Cool thanks the K-44's look like they have a little smaller magnet than the K-43's so will they take as much power or not?Magnet size has no bearing on power handling, only BL when comparing magnets of the same composition. Power handling is limited by one of two ways. Either thermal as in the voice coil separating, or by displacement when the air load on the driver affords displacement beyond Xmax at a given voltage and frequency. Quote Link to comment Share on other sites More sharing options...
WMcD Posted October 1, 2011 Share Posted October 1, 2011 Attached are the T-S parameters. The voice coil resistances are 3.4 and 3.3. I don't know why yours are so different. WMcD T-S Parameters for K-43 and K-44.pdf Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted August 9, 2017 Share Posted August 9, 2017 extra gasket on back side of basket for front mounting? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.