Wolfbane Posted December 23, 2013 Share Posted December 23, 2013 (edited) I've got some Crites CT-125 tweeters to install in my circa 1982 Belles. What is the best way to get at these? TIA, Wb Edited December 23, 2013 by Wolfbane Quote Link to comment Share on other sites More sharing options...
jason str Posted December 23, 2013 Share Posted December 23, 2013 4 screws 2 wires Get to the driver with a long screwdriver through the open back in the top section of the cabinet. Quote Link to comment Share on other sites More sharing options...
sunburnwilly Posted December 23, 2013 Share Posted December 23, 2013 You can remove the top board and have much easier access to the tweeter . Quote Link to comment Share on other sites More sharing options...
jason str Posted December 23, 2013 Share Posted December 23, 2013 Wood strips easily, the less screws removed the less chance there is in having to repair a screwhole in the wood. I would only remove the motorboard if absolutely needed myself but the choice is yours, either way will work. Quote Link to comment Share on other sites More sharing options...
Wolfbane Posted December 26, 2013 Author Share Posted December 26, 2013 Thanks guys. I was able to remove the old tweeters and replace them with the CT-125's without having to remove the speaker tops. My Belle's sound great with these and Bob Crite's XO's. Wb Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.