Jump to content


Photo
* - - - - 2 votes

New MCM setup


  • Please log in to reply
4 replies to this topic

#1 kg4guy

kg4guy

    Forum Veteran

  • Members
  • PipPipPipPip
  • 1,675 posts
  • Offline

Posted 08 January 2014 - 09:12 PM

Well I put this system a side for awhile so now I'm thinking about making some changes I was going to go 4 way adding a HF horn and driver to the Peavey MB-2 and the JBL 2360A horn and DIY MWM bass bins and getting a Ashly Protea 4.8SP however now I'm thinking of getting a Danley SM80 and getting rid of the Peavey MB-2's and the JBL 2360A . I have 3 Danley TH118's and will get another in a few months with the SM80 and run them with the MWM's with a Ashly Protea 3.6SP so The 4 MWM singles with 4 Danley TH118's in the middle and the Danley SM80 they will cover anything from 110Hz to 20khz probably 350Hz and run the TH118's to 100Hz and the MWM's from 100Hz-350Hz but will experiment with that should be interesting.


Edited by kg4guy, 08 January 2014 - 09:28 PM.

  • Split LSI'S Altec A6'S DANLEY SOUND LABS 2 SH96HO'S AND 2 DANLEY SOUND LABS DBH218'S with Ashly 3.6SP Crown itech 6000 for the SH96HO's and a Crown MA12000i for the DBH218's
     

#2 duder1982

duder1982

    Total Awesomeness

  • Heritage Members
  • PipPipPipPipPipPip
  • 5,121 posts
  • LocationOmaha
  • Offline

Posted 08 January 2014 - 09:54 PM

Looking forward to your findings, keep me in mind if you decide to sell the 2360s


If I can't build it or fix it, I really don't want it. I have found that I need to start with something that works in the beginning.

 

home theater build pics

 

Jamboree build pics

 

THSpud Clone build pics

 

Gear in profile

 

 

 


#3 ClaudeJ1

ClaudeJ1

    Forum Ultra Veteran

  • Members
  • PipPipPipPipPip
  • 4,383 posts
  • Offline

Posted 08 January 2014 - 10:10 PM

Well I put this system a side for awhile so now I'm thinking about making some changes I was going to go 4 way adding a HF horn and driver to the Peavey MB-2 and the JBL 2360A horn and DIY MWM bass bins and getting a Ashly Protea 4.8SP however now I'm thinking of getting a Danley SM80 and getting rid of the Peavey MB-2's and the JBL 2360A . I have 3 Danley TH118's and will get another in a few months with the SM80 and run them with the MWM's with a Ashly Protea 3.6SP so The 4 MWM singles with 4 Danley TH118's in the middle and the Danley SM80 they will cover anything from 110Hz to 20khz probably 350Hz and run the TH118's to 100Hz and the MWM's from 100Hz-350Hz but will experiment with that should be interesting.

Sounds excellent. I'm a Danley fan. Coherence of his Synergy horns is unmatched by anything I know of. His Jericho horns are nothing short of awesome for outdoor use.


<p>2.1/6.1=Front RCL=Danley SH-50, SR and SL and Center Rear are Ported Super Heresy's (Baby Cornwalls), All driven by Onkyo 818 AVR Amp section. Subwoofage galore Three Danley TH-50's and one DTS-20 from 0.1 Pre-Outs to Twin Crown K2.Oppo 103 for CD 2.1, HDMI out for 6.1 DVD/Blue Ray to Onkyo DSP's. Audyssey Multi EQ/XT32 room correction for ALL listening.

#4 ClaudeJ1

ClaudeJ1

    Forum Ultra Veteran

  • Members
  • PipPipPipPipPip
  • 4,383 posts
  • Offline

Posted 08 January 2014 - 10:11 PM

Looking forward to your findings, keep me in mind if you decide to sell the 2360s

Had those horns for a few years. The EV 9040's were a close third. K402's beat them both.


<p>2.1/6.1=Front RCL=Danley SH-50, SR and SL and Center Rear are Ported Super Heresy's (Baby Cornwalls), All driven by Onkyo 818 AVR Amp section. Subwoofage galore Three Danley TH-50's and one DTS-20 from 0.1 Pre-Outs to Twin Crown K2.Oppo 103 for CD 2.1, HDMI out for 6.1 DVD/Blue Ray to Onkyo DSP's. Audyssey Multi EQ/XT32 room correction for ALL listening.

#5 kg4guy

kg4guy

    Forum Veteran

  • Members
  • PipPipPipPip
  • 1,675 posts
  • Offline

Posted 08 January 2014 - 11:18 PM

Well I put this system a side for awhile so now I'm thinking about making some changes I was going to go 4 way adding a HF horn and driver to the Peavey MB-2 and the JBL 2360A horn and DIY MWM bass bins and getting a Ashly Protea 4.8SP however now I'm thinking of getting a Danley SM80 and getting rid of the Peavey MB-2's and the JBL 2360A . I have 3 Danley TH118's and will get another in a few months with the SM80 and run them with the MWM's with a Ashly Protea 3.6SP so The 4 MWM singles with 4 Danley TH118's in the middle and the Danley SM80 they will cover anything from 110Hz to 20khz probably 350Hz and run the TH118's to 100Hz and the MWM's from 100Hz-350Hz but will experiment with that should be interesting.

Sounds excellent. I'm a Danley fan. Coherence of his Synergy horns is unmatched by anything I know of. His Jericho horns are nothing short of awesome for outdoor use.

The SM 80's are impressive in fact I talked to Ivan Beaver from Danley on the phone and he recommended 4 TH118's for each SM80 if I decided to run them to there limit however I don't think I will come close to that maybe next summer when I do some large outdoor estate parties. I really wish I had them for a gig out on a polo field last September but KP 302's and 2 TH115's and a TH118 worked ok sounded awesome.


  • Split LSI'S Altec A6'S DANLEY SOUND LABS 2 SH96HO'S AND 2 DANLEY SOUND LABS DBH218'S with Ashly 3.6SP Crown itech 6000 for the SH96HO's and a Crown MA12000i for the DBH218's