finallygotmyheresies Posted February 8, 2015 Posted February 8, 2015 I need to get find a crossover for one of these. Any ideas where I could find a KP4.5A network? Would this get the job done? http://www.amazon.com/rolls-SX45-Tiny-Stereo-Crossover/dp/B00102VWJK/ref=sr_1_10?ie=UTF8&qid=1423414718&sr=8-10&keywords=active+crossover I'm pretty sure the guy I bought it from fried the K-1132 as well. Does anyone know where I could get a replacement diaphragm? Heres a pic of it next to Forte II's. I'm going to use this in my garage. Quote
OO1 Posted February 8, 2015 Posted February 8, 2015 you should reach colterphoto1 on this forum - Michael is the guru for Klpsch Pro - Quote
OO1 Posted February 8, 2015 Posted February 8, 2015 Does anyone know where I could get a replacement diaphragm? Heres a pic of it next to Forte II's. I'm going to use this in my garage. klipsch should have these in stock or ebay - Quote
jwc Posted February 8, 2015 Posted February 8, 2015 I think I have an extra pair. Just moved so they are packed up somewhere. Quote
The Dude Posted February 8, 2015 Posted February 8, 2015 If all else fails Minidsp is pretty good, I have been using it for some time and have been happy with it. http://www.minidsp.com/products/minidspkits/2-x-in-4-x-out-bal Quote
finallygotmyheresies Posted February 8, 2015 Author Posted February 8, 2015 I think I have an extra pair. Just moved so they are packed up somewhere. Whenever you get a chance to find them that would be awesome. I'd much rather go with a passive crossover if for no other reason than active crossovers scare me. Quote
finallygotmyheresies Posted February 8, 2015 Author Posted February 8, 2015 If all else fails Minidsp is pretty good, I have been using it for some time and have been happy with it. http://www.minidsp.com/products/minidspkits/2-x-in-4-x-out-bal Thank you for the suggestion duder. Quote
OO1 Posted February 8, 2015 Posted February 8, 2015 I think I have an extra pair. Just moved so they are packed up somewhere. how much do these go for - are these titanium diaphragms made by klipsch or by another maker - Quote
jwc Posted February 9, 2015 Posted February 9, 2015 If all else fails Minidsp is pretty good, I have been using it for some time and have been happy with it. http://www.minidsp.com/products/minidspkits/2-x-in-4-x-out-bal Thank you for the suggestion duder. I think I have an extra pair. Just moved so they are packed up somewhere. Whenever you get a chance to find them that would be awesome. I'd much rather go with a passive crossover if for no other reason than active crossovers scare me. If you would PM me tomorrow to remind me to look for them. I'll go down to the basement tomorrow night. Quote
jwc Posted February 10, 2015 Posted February 10, 2015 Small clinic here.... So the system has two XO. An HF network that is complicated. Would be hard to even run active on this. And a simple LF network that is -12dB....two common parts only. The end user typically would biamp with one amp to the top section with the HF 4.5 network and active on the bottom end with XO 650Hz. The bottom end needs to EQ. But the HF needs all kinds of EQ....so the HF passive XO is essential....very specific to that driver. 1 Quote
jwc Posted February 10, 2015 Posted February 10, 2015 finallygotmyheresies.......what driver is on the HF section? It shouldn't be the Klipsch 1132. Quote
jwc Posted February 10, 2015 Posted February 10, 2015 I want to make sure you need the KP4.5A network. This is what I have.....but it went with the KP 450.... not the 456. It wasn't the 1132 driver. Quote
jwc Posted February 10, 2015 Posted February 10, 2015 (edited) here is the first pair I had.... Edited February 10, 2015 by jwc Quote
jwc Posted February 10, 2015 Posted February 10, 2015 Here is the pair I have now with new parts..... Quote
jwc Posted February 10, 2015 Posted February 10, 2015 (edited) Here is the schem....one crazy network...... KP 450 HF.pdf Edited February 10, 2015 by jwc Quote
finallygotmyheresies Posted February 10, 2015 Author Posted February 10, 2015 I have the -1132 driver in my HF cab and I got the info for needing the KP4.5A from the KP-456 pdf that you can find in this thread https://community.klipsch.com/index.php?app=core&module=attach§ion=attach&attach_id=36941 I'm using my phone and can't add a hyperlink Quote
TasDom Posted February 10, 2015 Posted February 10, 2015 Here's the KP-456 HF but note the revision KP-456-HF B-1.pdf Quote
finallygotmyheresies Posted February 10, 2015 Author Posted February 10, 2015 Here's the KP-456 HF but note the revision KP-456-HF B-1.pdf Am I wrong in thinking the correct network for my HF section is a KP4.5A? The info came directly out of Klipsch literature. Quote
jwc Posted February 10, 2015 Posted February 10, 2015 I'm confused as you. The networks I have are the KP4.5A....and the literature for the KP456 says the KP4.5A....but when you look at the schematic for the KP456 HF network......it is a way different network. The KP450 I had was not the 1132. Quote
TasDom Posted February 10, 2015 Posted February 10, 2015 Here's the KP-456 HF but note the revision KP-456-HF B-1.pdf Am I wrong in thinking the correct network for my HF section is a KP4.5A? The info came directly out of Klipsch literature. I'd be thinking the same as you from the literature. I've never had the KP456 but did own the KP450's. Your thread made me curious to look at the schematics on both.......weird Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.