VRD Owners

[eth2]

I can't find my instruction manual. Can anyone tell me what each of the speaker output plugs are designated for (e.g. 2. 4. 8 ohms)?

Thanks

[Fjd]

Since I have the stereo version instead of mono blocks, here is a picture from the website. 

 

Edited March 2, 2015 by Fjd

[eth2]

Thank you,

Mine do not have the notations.

Thanks again

[Fjd]

Thank you,

Mine do not have the notations.

Thanks again

 

 

I believe that the notations are just added to the pictures and not the amps.  Here is a link to the page where the picture came from.

 

http://www.nosvalves.com/vrd.htm

[USNRET]

Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms.

[eth2]

Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms.

 

That explains why I am having trouble with the turntable.

[minermark]

 

Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms.

 

That explains why I am having trouble with the turntable.

 

Dam i was going to chime in w/same comment.

[muel]

One of these days we are going to have to get Craig to update his website!

[DeanG Crossovers]

Cameron, I'm getting ready to PM you.

[jimjimbo]

 

Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms.

 

That explains why I am having trouble with the turntable.

 

You wish......

[A1UC]

Thank you,

Mine do not have the notations.

Thanks again

Thats an upgrade option

Sent from my iPhone using Tapatalk

[Piranha]

Craig is good like that. Most any upgrade is available for the right amount.

[USNRET]

 

Thank you,

Mine do not have the notations.

Thanks again

Thats an upgrade option

Sent from my iPhone using Tapatalk

 

I wonder if I can send my pair back to Craig and have the notations added as an upgrade?

Edited March 7, 2015 by USNRET

[eth2]

I wonder if I can send my pair back to Craig and have the notations added as an upgrade?

 

I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise.

Edited March 7, 2015 by eth2

[USNRET]

 

I wonder if I can send my pair back to Craig and have the notations added as an upgrade?

 

I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise.

 

Teasing Earl, pair of VRD mono blocks to have the ohm annotations added to the back plate.

[eth2]

 

 

I wonder if I can send my pair back to Craig and have the notations added as an upgrade?

 

I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise.

 

Teasing Earl, pair of VRD mono blocks to have the ohm annotations added to the back plate.

 

 

 Whew!!    

[Piranha]

 

On 3/2/2015 at 5:15 AM, Fjd said:

 

 

I believe that the notations are just added to the pictures and not the amps.  Here is a link to the page where the picture came from.

 

http://www.nosvalves.com/vrd.htm

 

That would be my experience

[Schu]

Thread is two years old... and you have +4000 posts.

[Sat Thep Bien Hoa]

Tôi tin rằng các ký hiệu chỉ được thêm vào hình ảnh chứ không phải vào amp. Đây là liên kết đến trang mà hình ảnh xuất phát.