eth2 Posted March 2, 2015 Share Posted March 2, 2015 I can't find my instruction manual. Can anyone tell me what each of the speaker output plugs are designated for (e.g. 2. 4. 8 ohms)? Thanks Quote Link to comment Share on other sites More sharing options...
Fjd Posted March 2, 2015 Share Posted March 2, 2015 (edited) Since I have the stereo version instead of mono blocks, here is a picture from the website. Edited March 2, 2015 by Fjd Quote Link to comment Share on other sites More sharing options...
eth2 Posted March 2, 2015 Author Share Posted March 2, 2015 Thank you, Mine do not have the notations. Thanks again Quote Link to comment Share on other sites More sharing options...
Fjd Posted March 2, 2015 Share Posted March 2, 2015 Thank you, Mine do not have the notations. Thanks again I believe that the notations are just added to the pictures and not the amps. Here is a link to the page where the picture came from. http://www.nosvalves.com/vrd.htm Quote Link to comment Share on other sites More sharing options...
USNRET Posted March 2, 2015 Share Posted March 2, 2015 Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms. Quote Link to comment Share on other sites More sharing options...
eth2 Posted March 2, 2015 Author Share Posted March 2, 2015 Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms. That explains why I am having trouble with the turntable. 1 Quote Link to comment Share on other sites More sharing options...
minermark Posted March 2, 2015 Share Posted March 2, 2015 Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms. That explains why I am having trouble with the turntable. Dam i was going to chime in w/same comment. Quote Link to comment Share on other sites More sharing options...
muel Posted March 2, 2015 Share Posted March 2, 2015 One of these days we are going to have to get Craig to update his website! Quote Link to comment Share on other sites More sharing options...
Deang Posted March 3, 2015 Share Posted March 3, 2015 Cameron, I'm getting ready to PM you. Quote Link to comment Share on other sites More sharing options...
jimjimbo Posted March 3, 2015 Share Posted March 3, 2015 Earl, if yours is one of the special un-marked ones then all of the terminals are of negative polarity with 28 ohms. That explains why I am having trouble with the turntable. You wish...... Quote Link to comment Share on other sites More sharing options...
A1UC Posted March 6, 2015 Share Posted March 6, 2015 Thank you, Mine do not have the notations. Thanks again Thats an upgrade option Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Piranha Posted March 7, 2015 Share Posted March 7, 2015 Craig is good like that. Most any upgrade is available for the right amount. Quote Link to comment Share on other sites More sharing options...
USNRET Posted March 7, 2015 Share Posted March 7, 2015 (edited) Thank you, Mine do not have the notations. Thanks again Thats an upgrade optionSent from my iPhone using Tapatalk I wonder if I can send my pair back to Craig and have the notations added as an upgrade? Edited March 7, 2015 by USNRET Quote Link to comment Share on other sites More sharing options...
eth2 Posted March 7, 2015 Author Share Posted March 7, 2015 (edited) I wonder if I can send my pair back to Craig and have the notations added as an upgrade? I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise. Edited March 7, 2015 by eth2 Quote Link to comment Share on other sites More sharing options...
USNRET Posted March 8, 2015 Share Posted March 8, 2015 I wonder if I can send my pair back to Craig and have the notations added as an upgrade? I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise. Teasing Earl, pair of VRD mono blocks to have the ohm annotations added to the back plate. Quote Link to comment Share on other sites More sharing options...
eth2 Posted March 8, 2015 Author Share Posted March 8, 2015 I wonder if I can send my pair back to Craig and have the notations added as an upgrade? I know I will be sorry I asked, but "pair" of what to have notations added? Tattooing in that region is unwise. Teasing Earl, pair of VRD mono blocks to have the ohm annotations added to the back plate. Whew!! Quote Link to comment Share on other sites More sharing options...
Piranha Posted January 6, 2018 Share Posted January 6, 2018 On 3/2/2015 at 5:15 AM, Fjd said: I believe that the notations are just added to the pictures and not the amps. Here is a link to the page where the picture came from. http://www.nosvalves.com/vrd.htm That would be my experience Quote Link to comment Share on other sites More sharing options...
Schu Posted January 6, 2018 Share Posted January 6, 2018 Thread is two years old... and you have +4000 posts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.