flatgrass Posted June 26, 2015 Share Posted June 26, 2015 I have a Scott 222C (without case) which I built a stand for, but now would like to attach some feet instead. There are four small threaded holes on the underside of the chassis at the very outside of the width. Before I go running back and forth to the hardware bins at the local hardware store, would anyone know the thread diameter,size, pitch, etc? TIA. Quote Link to comment Share on other sites More sharing options...
Guest thesloth Posted June 26, 2015 Share Posted June 26, 2015 http://www.digikey.com/Web%20Export/Supplier%20Content/3M_19/PDF/3M_BumponSelectionGuide.pdf?redirected=1 I used the clear hemisphere bumpons by 3M for my Scott 299. I believe my Klipsch RB-81 II's came with the large black hemisphere bumpons to stick on the bottom of the speakers. Quote Link to comment Share on other sites More sharing options...
flatgrass Posted June 27, 2015 Author Share Posted June 27, 2015 Stick ons may be a last resort. The plan was to build a small frame with isolation cones inserted and be able to bolt onto the amplifier chassis. Guess I am going to try the trial and error method from the bolt bins. Thinking about starting off with a #6 or #4 bolt. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.